Fox RX+ Micron 4 Rod Set
€910,00
€1.050,00
 Description
 Weatherproof sealed case
 Digital circuitry
 D-Tec™ Plus Sensing System (DTSS)
 Low battery drain
 CNC machined Tru-Run™ roller wheel
 Twin multi-colour LEDs (Red, Green, Blue, Orange, Purple & White)
 On / Off toggle switch with 2 operational modes (day and night mode)
 When in night mode both LEDs will subtly glow in your chosen color
 High quality cone speaker
 Rigid 3/8" stainless steel thread
 Rod-friendly rubber inlays
 Indexed ergonomic control for volume (8 different levels of volume with lowest setting being completely silent)
 Indexed ergonomic control for tone (8 different tone settings: turn dial clockwise to raise pitch and anti-clockwise to lower pitch)
 Indexed ergonomic control for Intelligent Sensitivity featuring See-Saw elimination (8 different sensitivity settings – see below Sensitivity table for comparison to NTX-R)
 Range test function allows user to check RX+ Receiver is picking up RX+ head at any given range
 Low battery warning (LED color changes to cyan indicating it is time to replace batteries)
 Power Out Socket (2.5mm) for use with illuminated Swingers
 Supplied with two compression washer options: rigid and soft with an additional spare soft washer per unit
 Requires 2 x AA batteries
 RX+ Single heads, RX+ Receiver, 2-rod and 3-rod presentation sets also available separately
 Improved features compared to NTX-R
 Deeper ears with no increase in the height of the alarm
 Twin multi-color LEDs, one per ear and at the very top of the ear
 External control of the multi-colour LEDs with Color Sync™ function – simply change the LED color via the button on the battery cover
 Manually selectable day and night modes
 External control of the Vari-Bright adjustable LED brightness to suit the conditions you are fishing in (choice of 3 LED brightness settings in day mode and 3 different brightness settings in night mode) simply adjust via button on battery cover
 Larger clearance around the roller wheel and improved drainage vastly reduces the chances of the roller wheel freezing up in extreme cold conditions
 Stronger range performance with RX+ Receiver
 Improved sensitivity range (see below)
 Sensitivity Control
 In all sensitivity settings (except maximum), the line must travel the specified distance in the same direction and within 2 seconds in order to trigger the unit. Any movement in the opposite direction will reset the distance counter to zero. This can substantially reduce or eliminate false triggering caused by wind and water movement.                            
Line Movement RX+ Line Movement NTX-R
 Setting 1 (Min) 90mm 74mm
 Setting 2 73mm 56mm
 Setting 3 56mm 48mm
 Setting 4 34mm 40mm
 Setting 5 17mm 32mm
 Setting 6 11mm 24mm
 Setting 7 5.6mm 16mm
 Setting 8 (Max) 2.8mm 8mm
 RX+ Receiver
 Features
 Ultra-Long Range™
 Digital circuitry
 Low battery drain
 Battery life indication when receiver is switched on (4 x green LEDs indicate full/close to full, 3 x green LEDs indicate the batteries are used, but do not need replacing, 2 x orange LEDs indicate the batteries are becoming low, 1 x red LED indicates batteries are low and need replacing)
 Low battery warning (LEDs will flash cyan periodically indicating the batteries need replacing)
 Alarm low battery warning (when RX+ head turns to low battery warning so will the receiver for that particular alarm, again changing color to cyan)
 Vibration alert function (via switch on rear)
 Bivvy light function (via switch on rear, see below for more details)
 Anti-theft alarm
 Easy RX+ Micron registration (via switch at rear)
 Indicator LEDs with Color Sync™
 On/Off & volume control
 High quality cone speaker
 Lanyard attachment point
 Requires 3 x AA batteries
 Improved features over NTX-R Receiver
 Larger indicator LED windows, visible from both the front and the top of the receiver
 Optional bivvy light function when you receive a bite
 Free standing design for placing on bivvy table/bucket lid
 Soft grip casing
 Ability to sync up to eight RX+ Micron heads
 Stronger radio performance
 Silent ON mode, full receiver function but with no sound output
 Bivvy Light function
 When the bivvy light feature is turned on via the switch on the back of the receiver it will behave in the following ways:
 The indication lights on the receiver will be dimmed slightly to prevent the receiver emitting too much light whilst the bivvy light is active
 The bivvy light will only come on if three bite triggers are received in quick succession to prevent liners and false indication turning your bivvy light on unnecessarily
 The bivvy light will fade into full brightness and remain on while the alarm continues to send trigger signals to the receiver. The light will fade out to nothing in the 5 seconds after the trigger lights have gone out on the receiver as long as no more indications are received