Roll Spin

Short overviewThe Daiwa Regal LT 2500D is a lightweight and reliable spinning reel designed for anglers looking for smooth operation, low weight, and proven Daiwa quality. It is an excellent choice for everyday spinning fishing with monofilament or braided line, in freshwater and similar fishing conditions.DescriptionThe Regal LT 2500D model was developed according to Daiwa’s LT (Light & Tough) philosophy, combining reduced weight with sufficient strength for modern active fishing. Thanks to its lightweight body, deep spool, and advanced rotor and bail technologies, this reel delivers balanced operation, good line management, and reliable power transfer during casting and fighting fish.It is suitable for various spinning techniques, especially when a combination of sensitivity, comfort, and stability in use is important. The deep spool provides good line capacity, while the reel construction contributes to smooth and quiet performance on the water.FeaturesLightweight LT concept for a better weight-to-power ratioZaion V super composite for reduced weight and good strengthDS5 reel bodyDeep spool for greater line capacityInfinite anti-reverse for secure and instant backstopSilent Oscillation system for smoother and more refined operationAluminium handle for a stable grip and durabilityTechnologyLT (Light & Tough)Airdrive RotorAir RotorAirDrive BailSpecificationsModelRegal LT 2500DBrandDaiwaMaterialZaion V super compositeBodyDS5Weight201 gSpoolDeep spoolSystemInfinite anti-reverseOscillationSilent OscillationHandleAluminiumTechnologiesLT, Airdrive Rotor, Air Rotor, AirDrive BailAdvantagesLow weight of 201 g for more comfortable all-day fishingSmooth and balanced operation thanks to Daiwa rotor technologiesGood line capacity due to the deep spoolA reliable choice for spinning fishing with monofilament and braided lineQuality construction that offers durability and stabilityNoteProduct availability depends on stock levels. Please check warranty and exact delivery information before purchase.

Quick OverviewDaiwa Regal LT 2000D is a lightweight and reliable spinning reel designed for anglers looking for smooth operation, precise line lay, and low weight. It is an excellent choice for light spinning, a finesse approach, and situations where sensitivity and control are especially important.DescriptionThe Regal LT 2000D model was developed according to the Daiwa LT concept, which combines low weight with the necessary strength for everyday fishing. This reel performs well in freshwater spinning, targeting small and medium-sized predators, and finer lure presentations, while its deep spool and balanced construction provide stable and comfortable performance throughout the entire day on the water.FeaturesLT (Light & Tough) construction for an excellent balance of weight and strengthDS5 reel body for rigidity and drive system stabilityZAION V super composite for low weight and durabilityDeep spool for greater versatility when choosing lineAluminium Air spool for reliable line layInfinite Anti-Reverse for secure and instant stopping of back playSilent Oscillation system for smoother and more precise operationAluminium handle for a firm grip and better controlScrewless rotor design for a cleaner and lighter constructionExcellent reel balance for reduced vibration during operationTechnologyAirdrive RotorAirDrive BailAirDrive DesignTOUGH DIGIGEARSpecificationsBrandDaiwaModelRegal LT 2000DProduct typeSpinning reelSize2000DConceptLT (Light & Tough)MaterialZAION V super compositeBodyDS5Bearings9 ball bearingsRotorAIR ROTOR / Airdrive RotorGearTOUGH DIGIGEARSpoolAluminium Air spool, deepHandleAluminiumAnti-reverseInfinite Anti-ReverseOscillationSilent Oscillation SystemRotor designScrewless rotor designWeight184 gProduct code10116-205AdvantagesVery low weight reduces fatigue during all-day spinning sessionsSmooth and quiet operation increases comfort and precision in lure presentationStrong and modern construction provides long-lasting reliabilityThe deep aluminium spool adds extra practicality when choosing lineAdvanced Daiwa technologies contribute to better balance and easier rotationNoteProduct availability may vary depending on stock levels. Warranty and purchase conditions apply according to store policy.

Short overviewThe Daiwa Regal LT 1000D is a lightweight and reliable spinning reel designed for finesse spinning and ultralight fishing. Thanks to the LT concept, DS5 body, and smooth operation with 9 bearings, it is an excellent choice for anglers seeking sensitivity, precision, and long-lasting durability.DescriptionThe Regal LT 1000D model was developed according to Daiwa’s LT (Light & Tough) philosophy, which combines low weight and high strength. The reel’s compact size is ideal for trout, perch, and other smaller predators, as well as for all situations where fine lure control, balanced operation, and reliable line lay are important.FeaturesLT (Light & Tough) concept for lower weight and greater efficiencyDS5 composite body for a good balance of strength and low weight9 ball bearings for smooth and quiet rotationAIR ROTOR for better balance and reduced start-up inertiaTOUGH DIGIGEAR drive for precise and long-lasting power transmissionAluminium spool for reliable performance and neat line layCNC-machined aluminium handle for a firm grip and stabilityTechnologyLT (Light & Tough)AIR ROTORTOUGH DIGIGEARSpecificationsModelRegal LT 1000DBrandDaiwaTypeSpinning reelConceptLT (Light & Tough)BodyDS5Bearings9BBRotorAIR ROTORDriveTOUGH DIGIGEARSpoolAluminiumHandleCNC-machined aluminiumProduct code10116-105AdvantagesA very good choice for ultralight and light spinningLow weight helps reduce fatigue throughout a full day of fishingSmooth operation and precise transmission improve lure controlHigh-quality Daiwa systems increase durability and reliabilityThe compact size pairs perfectly with sensitive spinning rodsNoteProduct availability and delivery time depend on stock status. Photos and equipment details may vary slightly depending on the manufacturer’s production batch.

Short OverviewThe Okuma Komodo LP SS KDS-364LX is a powerful left-handed low-profile baitcasting reel designed for demanding big predator fishing and inshore fishing. It combines a steel gearing system, a rigid aluminum body, and a reliable Carbonite drag for confident control when fighting strong fish.DescriptionThis model is designed for anglers looking for a durable baitcasting reel for tougher fishing conditions. The 6.4:1 gear ratio offers an excellent balance of speed and power, making the Komodo KDS-364LX a very good choice for pike, catfish, and other powerful freshwater predators, as well as for coastal saltwater fishing. The synchronized levelwind optimized for braided line contributes to even line lay and reliable operation under heavier loads.FeaturesLeft-handed low-profile baitcasting reel6.4:1 gear ratio for a good balance of speed and powerStainless steel main gear and drive shaftPrecision-cut stainless steel pinion gearRigid ALC aluminum body and side plateCRC protection for increased corrosion resistanceHigh-performance multi-disc Carbonite drag6-pin cast control systemSynchronized levelwind optimized for braided lineZirconium line guide insertQuick-Set anti-reverse systemClicker function6+1 bearingsTechnologyAlumiLite (ALC) constructionVelocity Control SystemCorrosion Resistant Coating (CRC)SpecificationsBrandOkumaModelKomodo LP SS KDS-364LXOrientationLeft-handedReel TypeLow-profile baitcasting reelGear Ratio6.4:1Bearings6+1Weight310 gMaximum Drag11 kgLine Capacity (mm/m)0,33/250, 0,37/230, 0,41/150ConstructionALC die-cast aluminumCorrosion ProtectionCRC coatingDrag SystemMulti-disc CarboniteCast Control6-pin Velocity Control SystemLevelwindSynchronized, optimized for braided lineLine GuideZirconium insertAnti-reverseQuick-SetClickerYesSKU58057AdvantagesVery robust gearing system for big fish and heavier luresCorrosion resistance suitable for freshwater and inshore fishingPrecise and powerful drag for more secure control during the fightExcellent performance with braided line thanks to the synchronized levelwindRigid aluminum construction reduces flex under loadNoteProduct availability depends on stock status. After use in saltwater, rinsing with fresh water is recommended for a longer service life.

Quick OverviewThe Okuma Epixor XT EPXT-50 FD is a quality spinning reel designed for anglers seeking reliability, smooth operation, and precise line lay. It is an excellent choice for lure fishing and general freshwater spinning, but also for more demanding conditions thanks to its corrosion-resistant components.DescriptionThis model combines solid construction, precise gearing, and technologies that improve casting, reduce vibration, and extend the reel’s service life. Slow oscillation enables neater line or braid lay, while the CFR rotor speeds up drying and helps reduce moisture retention. Thanks to its powerful front drag and robust handle, the reel is suitable for a wide range of spinning techniques.Features7+1 stainless steel bearings for smooth and reliable operationMulti-disc drag system with Japanese oil-felt washersQuick-Set anti-reverse for instant back play lock-upPrecision machine-cut brass pinion gearSlow oscillation system for improved line layCorrosion-resistant body and rotorRigid metal handle for greater strength and stabilityMachined aluminum two-tone anodized spool with LCS lipHeavy-duty solid aluminum bail wireLow vibration during operationTechnologyTCA: C-40X Torsion Control Armor for reducing body twistCFR: Cyclonic Flow Rotor for faster drying and reduced risk of corrosionSlow Oscillation System for neater line layRESII: Rotor Equalizing System for improved rotor balanceSpecificationsModelEPXT-50 FDBrandOkumaReel TypeFront drag spinning reelBearings7+1, stainless steelGear Ratio5.0:1Drag Power10 kgRetrieve per Turn76 cmMonofilament Capacity0,25 mm / 260 m; 0,30 mm / 180 m; 0,35 mm / 130 mWeight304 gFrame MaterialC-40X carbon fiberBody and RotorGraphite, corrosion-resistantSpoolMachined aluminum, two-tone anodizing, LCS lipHandleRigid metal constructionAnti-reverseQuick-SetBalancingRESII computer-balanced rotorSKU58610AdvantagesVery good line lay for longer and neater castsSolid and stable construction for dependable performance under loadSmooth drag and quiet operation while fighting fishResistance to moisture and corrosion for longer service lifeExcellent balance of weight, power, and precision for spinning fishingNoteThe product is supplied depending on stock availability. Photos and minor design details may differ from the actual product without affecting functionality or the factory warranty.

Short OverviewThe Okuma Aria 40a FD 1BB is a reliable spinning reel designed for anglers looking for a good balance of price, durability, and functionality. Thanks to its lightweight graphite construction, CFR rotor, and smooth front drag, it is an excellent choice for everyday freshwater fishing.DescriptionThis reel was developed for universal spinning applications, whether you are targeting predatory fish with lures or need a reliable reel for recreational fishing. The Okuma Aria 40a FD 1BB combines a durable graphite body and rotor, a precision-machined brass pinion, and an aluminum spool for dependable performance and a long service life. The front drag system with multi-disc oiled Japanese felt drag washers provides consistent line release and better control during the fight.FeaturesSpinning reel with front drag for universal use1 ball bearing for stable and smooth operationMulti-disc, oiled Japanese felt drag washersPrecision-machined brass pinion for greater gear durabilityCorrosion-resistant graphite body and rotorAnodized aluminum spoolStainless steel bail wire for added durabilityQuick-Set anti-reverse for instant hooksetsRESII balanced rotor for smoother operationTechnologyCFR (Cyclonic Flow Rotor) technology improves airflow through the rotor, speeds up drying, and reduces moisture retention and the possibility of corrosionRESII (Rotor Equalizing System) computer-balances the rotor for more stable rotation and less vibrationSpecificationsBrandOkumaModelAria 40a FD 1BBTypeSpinning reel with front dragGear Ratio5.0:1Drag Power7,9 kgBearings1 ball bearing + Quick-Set anti-reverseBody and Rotor MaterialCorrosion-resistant graphiteRotor TechnologyCFR Cyclonic Flow RotorPinionPrecision-machined brass pinionSpoolAnodized aluminum spoolBail WireStainless steel bail wireBalancing SystemRESII Computer Balanced Rotor Equalizing SystemWeight234 gLine Capacity (mm/m)0,25/260 • 0,30/180 • 0,35/130Product Code57737AdvantagesLightweight and durable construction for frequent useReliable front drag for better control during the fightCFR technology helps reduce moisture retention in the rotorThe aluminum spool and steel bail wire contribute to long-lasting durabilityAn excellent choice for recreational and beginner spinning anglersNoteProduct availability and certain details may vary depending on the delivery batch. Please check stock status and product specifications before ordering.

Short overviewThe Okuma Aria 30A FD 1BB is a reliable spinning reel designed for anglers seeking a good balance of price, durability, and smooth operation. Its compact body, CFR rotor, and aluminum spool make it an excellent choice for everyday freshwater fishing.DescriptionThis reel is designed for recreational anglers and fishermen who want functional and durable gear for lure fishing and general spinning. The corrosion-resistant graphite body reduces weight, while the precision-machined brass drive gear and multi-disc drag ensure dependable performance during the fight with fish. Thanks to the balanced rotor and quality components, the Okuma Aria 30A FD 1BB provides stable line lay and comfortable performance on the water.FeaturesCompact body design for easier handlingMulti-disc drag with oiled felt washers1 ball bearing for smoothness and durabilityPrecision-machined brass pinion gearCorrosion-resistant body and rotorMachined, anodized aluminum spoolStainless steel bail wireLine retrieve 71 cm per handle turnTechnologyCFR: Cyclonic Flow Rotor technology for better ventilation and faster rotor dryingRESII: computer-balanced rotor for smoother operation and reduced vibrationSpecificationsBrandOkumaModelAria 30A FD 1BBTypeFront drag spinning reelBearings1BB (1 ball bearing)Gear ratio4,8:1Weight221 gMaximum drag7 kgLine retrieve71 cmMono line capacity0,20 mm / 300 m; 0,25 mm / 200 m; 0,30 mm / 130 mBody and side plate materialCorrosion-resistant graphiteSpoolMachined, anodized aluminumBail wireStainless steelColorSilverWarrantyLimited 1-year warrantyAdvantagesAn excellent choice for anglers looking for an affordable and reliable spinning reelThe low weight of 221 g contributes to comfort during long hours of fishingCorrosion resistance extends the reel's service lifeStable operation and a balanced rotor reduce vibration during retrieveThe aluminum spool and brass gear increase the durability of key partsNoteProduct availability depends on stock status. The product comes with a limited one-year manufacturer's warranty.

Short OverviewThe Okuma Proton PTN-30 FD is a versatile reel designed for anglers looking for reliable performance, a good price-to-performance ratio, and readiness to fish immediately after purchase. It comes factory-spooled with 120 m of braided line in 0,19 mm diameter, making it an excellent choice for float fishing, feeder fishing, and light spinning.DescriptionThis front drag reel from Okuma’s Proton series is designed for a wide range of freshwater fishing situations. Thanks to its 3+1 bearing system, balanced operation, and pre-spooled braided line, it offers practicality and confidence when fishing on small and medium waters. It is especially suited to anglers who want a functional reel for multiple techniques without additional investment in basic equipment.Features3+1 bearings for smooth and stable operationFactory-spooled braided line: 120 m / 0,19 mmSuitable for float fishing, feeder fishing, and light spinningReliable front drag system for good control during the fightReady to fish straight out of the boxSpecificationsModelProton PTN-30 FDBearings3+1BBGear ratio5,0:1Line retrieve per turn66 cmDrag power3,0 kgSpool capacity0,20 mm / 260 m • 0,25 mm / 170 m • 0,30 mm / 120 mPre-spooled line120 m / 0,19 mm, braided lineBody / rotorGraphite, corrosion-resistantSpoolAluminium, two-tone anodizedAnti-reverseQuick-SetGearBrass, precision machine-cutAdvantagesAn excellent choice for anglers who want a ready-made reel and braided line combinationVersatile use across multiple fishing techniquesSmooth operation and reliable drag in everyday fishingRobust construction with corrosion-resistant componentsVery good value for moneyNoteThe product is supplied with 120 m of pre-spooled braided line in 0,19 mm diameter. Manufacturer data may vary slightly depending on the delivery batch.

Quick OverviewThe Okuma Makaira Spinning 20000 FD is a premium saltwater spinning reel designed for extreme loads, big game fishing, and targeting large marine predators. It is distinguished by exceptional power, robust construction, maximum corrosion protection, and a powerful drag of up to 30 kg, making it an excellent choice for popping and jigging techniques.DescriptionThis model was developed for demanding sea fishing conditions, where reliability, strength, and control during the fight are crucial. The Okuma Makaira 20000 FD combines a forged aluminum body, precision-machined stainless steel gearing, and an advanced drag system to deliver stable performance under heavy loads. The left-hand retrieve is specially adapted for anglers who prefer a Left Hand Retrieve setup.FeaturesForged aluminum, machined body and side plate for maximum strengthForged aluminum Cyclonic Flow rotorForged stainless steel main gear for high transmission powerPrecision-machined 17-4 stainless steel pinion gearOversized 17-4 stainless steel spool shaft reduces flexHigh-output Carbonite drag with Cal’s drag greaseCustom pre-set drag system for more precise controlDual anti-reverse system for added safety and reliabilityHeavy-duty solid aluminum bail wire with manual closureRotor brake system works in combination with manual bail closureMachined aluminum spool with 2-tone anodization and LCS lipMachined aluminum screw-in handle for greater strengthAluminum handle knob on the 20000 modelTechnologyHydro Sealed Body for maximum protection against water intrusionDFD drag system for powerful and smooth operation under loadCRC anti-corrosion coating for better saltwater resistanceQuick-Set stainless German anti-reverse roller bearing9HPB + 1RB corrosion-resistant stainless steel bearingsSpecificationsModelMakaira Spinning 20000 FDBrandOkumaRetrieve OrientationLeft-hand retrieve (Left Hand Retrieve)Bearings9HPB + 1RBGear Ratio5.8:1Line Retrieve per Turn131,1 cmMaximum Drag30 kgWeight997 gMono Line Capacity0,45 mm / 450 m; 0,50 mm / 370 m; 0,55 mm / 300 mBraided Line Capacity490 m / 65 lb (29,48 kg); 400 m / 80 lb (36,29 kg)Body / Side PlateForged aluminum, machinedRotorForged aluminum, Cyclonic Flow rotorMain GearForged stainless steelPinion Gear17-4 stainless steel, precision-machinedSpool ShaftOversized, 17-4 stainless steelDragCarbonite high output drag with Cal’s drag greaseSealingHydro Sealed BodyAnti-ReverseDual anti-reverse + Quick-Set roller bearingSpoolMachined aluminum, 2-tone anodized, LCS lipHandleMachined aluminum, screw-inBail WireSolid aluminum bail wire, manual closureAnti-Corrosion ProtectionCRC corrosion protection processAdvantagesExceptional power and durability for the most demanding saltwater fishingVery high resistance to salt, moisture, and corrosionPowerful and smooth 30 kg drag for a secure fight with large fishStable power transmission and reduced flex under loadAn excellent choice for popping, shore jigging, and offshore jiggingPrecision craftsmanship and premium materials for maximum reliabilityNoteThis model comes in a left-hand retrieve version. After use in saltwater, rinsing with fresh water is recommended for long-lasting and reliable performance.

Short OverviewThe Okuma Inspira ISX-40 FD is a lightweight and powerful spinning reel designed for anglers seeking smooth operation, a reliable drag, and durable construction. With 8+1 bearings, a spare spool, and advanced Okuma technologies, it is an excellent choice for lure fishing and versatile freshwater fishing.DescriptionThis fishing reel combines low weight, a rigid aluminum body, and precise gearing to provide stability during the fight and comfortable use throughout the day on the water. The Okuma Inspira ISX-40 FD stands out in particular for its smooth rotation, reliable line lay, and a drag ready for various spinning techniques, from lighter to medium-heavy lure fishing.Features8+1 stainless steel bearings for very smooth operationMulti-disc Carbonite drag system with stainless steel washersQuick-Set anti-reverse for instant hooksets and secure contactMachined brass pinion gear and reinforced HDGII main gearMachined aluminum handle with screw-in fittingLightweight TPE handle knob for greater comfort while fishingAluminum spool ready for braided lineSolid aluminum bail wire for greater durabilitySpare spool included in the packageRESII rotor for better balance and smoother operationTechnologyTorsion Control Armor (TCA) – increases structural rigidity and reduces twistingFlite Drive – improves gear stability and smoothness of operationCyclonic Flow Rotor – contributes to better ventilation and reel dryingHDGII gear – reinforced drive system for greater durabilityQuick-Set anti-reverse – instant anti-reverse engagementSpecificationsModelInspira ISX-40 FDTypeSpinning reelBearings8+1 stainless steel bearingsGear Ratio5.0:1Weight283 g (10,0 oz)Line Capacity0,25 mm / 300 mConstructionLightweight and rigid aluminum TCA constructionDragMulti-disc Carbonite drag with stainless steel washersDrive SystemHDGII main gear and machined brass pinion gearHandleMachined aluminum handle with screw-in fittingHandle KnobLightweight TPE handle knobSpoolMachined aluminum spool for braided line + spare spoolBailSolid aluminum bail wireRotorRESII computer-balanced rotorAdvantagesExcellent balance of low weight and power for active spinning fishingVery smooth and quiet operation thanks to quality gearing and bearingsReliable drag for a confident fight with stronger fishBraid-ready spool saves time when preparing your tackleThe spare spool allows quick line changes according to conditions on the waterNoteThe product is supplied with one spare spool. Availability and packaging details may vary depending on the production batch and supplier.

Short OverviewThe Okuma Fina Pro XP FOX-65FD is a powerful and reliable fishing reel designed for anglers looking for high line capacity, stable operation, and dependable control while fighting fish. It is an excellent choice for freshwater and saltwater fishing, especially when longer casts and durable tackle are important.DescriptionThis model from the Fina Pro XP series is built for reliable performance in more demanding fishing conditions. The corrosion-resistant graphite body, aluminum spool, and precision-engineered gearing contribute to durability and smooth operation, while the larger spool capacity provides added confidence when targeting bigger fish. The reel is suitable for a variety of techniques, including carp fishing, feeder fishing, and general fishing on larger waters.FeaturesMulti-disc drag system with Japanese oiled felt for smooth and reliable operation1+1BB bearing system for stable performanceQuick-Set anti-reverse roller bearing for instant back play eliminationPrecision-machined brass pinion gearCorrosion-resistant graphite bodyMachined aluminum two-tone anodized spoolEven line lay and better casting controlSuitable for freshwater and saltwater fishingTechnologyPrecision Elliptical Gearing System for smoother operation and more even line layRESII: Computer-balanced Rotor Equalizing System for improved rotor balance and smoother operationLCS line control spool for better line control and more efficient castingSpecificationsBrandOkumaModelFina Pro XP FOX-65FDBearings1+1BBWeight584 gBodyGraphite, corrosion-resistantDrag SystemMulti-disc with Japanese oiled feltGearPrecision-machined brass pinionSpoolMachined aluminum, two-tone anodizedAnti-reverseQuick-Set roller bearingTechnologiesPrecision Elliptical Gearing System, RESII, LCS line control spoolAdvantagesReliable performance and good durability in various fishing conditionsLarge spool capacity for fishing at greater distancesSmooth rotation and better control thanks to proven Okuma technologiesMore stable fish-fighting performance with a quality drag systemA good balance of durability, functionality, and affordabilityNoteProduct specifications may vary depending on the delivery batch. After use in the sea, rinsing with fresh water is recommended for a longer service life.

Short OverviewThe Okuma Custom Spin CSP-55FS is a reliable spinning reel designed for anglers looking for a good balance of power, smooth operation, and durability. With 5+1 bearings, a 9 kg drag, and a lightweight graphite body, it is an excellent choice for a variety of freshwater and general spinning techniques.DescriptionThis Okuma reel is engineered for stable and precise performance during frequent fishing sessions. The Precision Elliptical Gearing System contributes to even line lay, while the Quick-Set anti-reverse enables instant engagement with no back play. Thanks to the corrosion-resistant graphite body, aluminum spool, and precision-machined brass pinion gear, the CSP-55FS provides confidence and control when lure fishing and in other techniques that require a dependable spinning reel.Features5+1 bearing system for smooth and stable operationMulti-disc drag system with Japanese oil-felt washersMaximum drag force of 9 kg4.5:1 gear ratio for a good balance of power and controlLine retrieve 76 cm per handle turnCorrosion-resistant graphite bodyMachined aluminum spool with two-tone anodizingPrecision-machined brass pinionMetal handle with EVA knob for a secure gripLine capacity 325 m / 0,30 mmTechnologyQuick-Set anti-reverse for instant power transfer with no back playPrecision Elliptical Gearing System for smoother operation and more even line layRESII computer-balanced rotor for more stable rotationLCS spool for better line control and improved casting performanceSpecificationsBrandOkumaModelCustom Spin CSP-55FSTypeSpinning reelBearings5+1Gear Ratio4.5:1Line Retrieve76 cm / turnMax. Drag9 kgLine Capacity325 m / 0,30 mmWeight260 gBodyCorrosion-resistant graphiteSpoolMachined aluminum spool, two-tone anodizingPinionPrecision-machined brass gearDrag SystemMulti-disc felt, lubricated with Japanese oilAdvantagesExcellent combination of low weight and solid drag powerSmooth and precise line lay for better line controlDurable materials suitable for regular useStable operation and a secure grip during the fight with fishA practical choice for anglers who want a dependable spinning reel at an affordable priceNoteProduct availability depends on stock status. Please check warranty and delivery details before ordering.

Short OverviewThe Okuma Custom Spin CSP-40FD is a lightweight and reliable spinning reel designed for anglers looking for smooth operation, a dependable drag, and good line control. It is suitable for everyday spinning in freshwater and coastal fishing, with a durable corrosion-resistant construction.DescriptionThis model combines precise gearing, a balanced rotor, and a quality spool for neat line lay and stable performance throughout the whole day on the water. The Okuma Custom Spin CSP-40FD is a good choice for lure fishing, light to medium-heavy spinning, and situations where longer casts, a reliable drag, and long-lasting mechanism durability are important.FeaturesCorrosion-resistant graphite body and rotorMulti-disc drag system with Japanese oiled felt washersQuick-Set anti-reverse system for instant anti-reverse engagementAnodized aluminum spoolAdditional graphite spoolEFR II line roller for smoother line flow and reduced line twistTwo round metal line clips on the spoolSoft ABS T-handle for a secure and comfortable gripSmooth operation with 3 ball bearings + 1 roller bearing73 cm retrieve per handle turn for efficient spinning performanceTechnologyCFR (Cyclonic Flow Rotor) for better airflow and faster drying of the reel interiorRESII (Rotor Equalizing System) for a computer-balanced rotor and reduced vibrationEFR II (Even Flow Line Roller) for more even line guidanceSpecificationsBrandOkumaModelCustom Spin CSP-40FDTypeSpinning reelBearings3 ball + 1 rollerGear ratio5.0:1Retrieve per turn73 cmDrag power6 kgMonofilament capacity240 m / 0,25 mmWeight270 gBody and rotorCorrosion-resistant graphiteSpoolAnodized aluminumAdditional spoolGraphiteAnti-reverseQuick-Set infinite anti-reverseLine rollerEFR IIRotorCFR and RESIIHandleSoft-touch ABS T-shapeLine clips2 round metal clipsAdvantagesReliable and smooth drag for safer fish fightingGood line control and neat line lay during frequent castingDurable construction for long-lasting performance in various conditionsBalanced rotor reduces vibration and increases comfort of useAdditional spool provides greater convenience on the waterNoteProduct availability depends on stock status. Line capacity may vary slightly depending on the type and manufacturer of the monofilament or braided line.

Short overviewThe Okuma Ceymar LP C-266WLX is a low-profile left-hand baitcasting reel designed for anglers seeking precise casting, smooth operation, and reliable control while lure fishing. Thanks to its lightweight construction, 6+1 bearing system, and magnetic cast control, it is an excellent choice for all-day fishing.DescriptionThis Okuma baitcasting reel combines a corrosion-resistant graphite frame and a machined aluminum spool for a balanced ratio of low weight and durability. It is suitable for various lure fishing techniques where casting precision, control, and quick reel response are important, while the ergonomic handle contributes to comfort with every retrieve.FeaturesLow-profile left-hand baitcasting reelCorrosion-resistant graphite frame and side platesA6061-T6 machined anodized aluminum U-shaped spool6+1 bearing system for smooth and stable operationMulti-disc composite drag systemExternally adjustable magnetic cast controlQuick-Set anti-reverse roller bearingSide plate opening for quick spool changesErgonomically shaped handleTechnologyMagnetic Control SystemSpecificationsBrandOkumaModelCeymar LP C-266WLXReel typeLow-profile baitcasting reelHandLeftBearings6BB + 1RBGear ratio6.6:1Retrieve per turn72,39 cmMaximum drag5 kgLine capacity160 m / 0,29 mmWeight215 g (7.6 oz)Frame materialCorrosion-resistant graphiteSpool materialA6061-T6 anodized machined aluminum, U-shapedColorBlack/redBenefitsMore precise and controlled casting thanks to magnetic controlSmooth retrieve and reliable operation with 6+1 bearingsLow weight suitable for prolonged active fishingFast hook-setting response thanks to the anti-reverse systemDurable construction for long-lasting useNoteProduct availability may change without prior notice. Please check warranty and purchase terms on the store page.

Short OverviewThe Okuma Azores S-9000 FD is a powerful saltwater reel designed for demanding anglers who seek reliability, strong drag power, and corrosion resistance. It is an excellent choice for shore and boat fishing, as well as techniques such as shore casting and jigging.DescriptionThis model was developed for fishing in harsh saltwater conditions, where strength, stability, and durability are essential. The rigid aluminum body, precision-machined drive components, and waterproof drag sealing ensure dependable performance even under heavy loads. Thanks to its fast line retrieve and powerful drag of up to 20 kg, the Azores S-9000 FD is suitable for targeting larger saltwater species from shore or boat.FeaturesDFD Precision Dual Force Drag system for powerful and precise drag performancePrecise drag adjustment with click settingsMulti-disc Carbonite and felt drag washers6HPB + 1RB corrosion-resistant bearingsQuick-Set anti-reverse roller bearing and additional ratchet systemDual anti-reverse for greater operating securityPrecision-machined brass pinionRigid die-cast aluminum body, side plate, and rotorMachined anodized aluminum spool with LCS lipMachined aluminum handle for added strengthHydro Block waterproof drag sealHeavy-duty aluminum bail wireTechnologyCRC: Corrosion Resistant Coating for improved corrosion protectionHDGII: High Density Gearing II for greater gear strength and durabilityLCS: Line Control System for improved line release controlMSS: Mechanical Stabilizing System for greater assembly stabilitySpecificationsModelAzores S-9000 FDGear Ratio5.4:1Bearings6HPB + 1RBLine Retrieve120,4 cm per turnMaximum Drag20 kgLine Capacity0,45 mm / 350 m, 0,50 mm / 280 m, 0,55 mm / 240 mWeight750 gBody, side plate and rotorDie-cast aluminumPinionPrecision-machined brassSpoolMachined anodized aluminum with LCS systemHandleMachined aluminumDragDFD with Carbonite and felt washersDrag SealingHydro BlockProtectionCRC anti-corrosion coatingEAN4718947012630AdvantagesExcellent drag power for fighting large saltwater fishHigh resistance to salt and corrosion for long-lasting performanceRigid aluminum construction reduces flex under loadFast line retrieve makes fish and lure control easierReliable mechanics for intensive shore and boat fishingNoteThe product is supplied in one version. After fishing in saltwater, rinsing with fresh water and regular maintenance are recommended for a long service life.

Quick OverviewThe Okuma Azores S-8000 FD is a powerful saltwater reel designed for demanding fishing in saltwater conditions. It features strong drag power, a robust aluminum construction, and high corrosion resistance. It is an ideal choice for anglers looking for reliability in jigging, heavy spinning, and other demanding sea fishing techniques.DescriptionThis reel was developed for situations where power, stability, and durability are key. The Dual Force Drag system enables smooth and precise drag adjustment, while the aluminum body and rotor ensure strength under load. Thanks to corrosion-resistant components, the Okuma Azores S-8000 FD stands out particularly in saltwater spinning, jigging, and fishing for larger predatory fish.FeaturesPowerful DFD drag system for stable performance under heavy loadsMulti-disc drag with Carbonite and felt washers6 + 1 bearings for smooth and reliable rotationQuick-Set anti-reverse roller bearing with additional ratchet systemDual anti-reverse for greater security when fighting fishPrecision-machined brass pinion gearRigid die-cast aluminum body, side plate, and rotorMachined aluminum handle for extra strengthAluminum spool with LCS lip for better line control and longer casting distanceHeavy-duty aluminum bail wireWaterproof drag seal for better protection when fishing at seaTechnologyDFD – Precision Dual Force Drag SystemCRC – anti-corrosion protective coatingHDGII – corrosion-resistant high-density gearingALC – rigid die-cast aluminum body, side plate, and rotorMSS – carbon Mechanical Stabilizing SystemHydro Block – waterproof drag sealSpecificationsModelAzores S-8000 FDBrandOkumaApplicationSaltwater fishingGear Ratio5.4:1Retrieve per Turn116,84 cmLine Capacity310 m / 0,45 mmBearings6 + 1Weight748 gDrag Power20 kgBody and RotorALC aluminumPinion GearPrecision-machined brassSpoolMachined aluminum, two-tone anodized, LCS lipHandleMachined aluminumAnti-reverseQuick-Set roller bearing + ratchet systemDrag SealingHydro BlockCorrosion ProtectionCRC and HDGIIColorBlueAdvantagesExcellent power and control when fishing for large fishHigh resistance to salt and demanding sea conditionsStrong aluminum construction for a long service lifeSmooth operation and secure hooksets thanks to the dual anti-reverse systemThe LCS spool contributes to better casting performance and cleaner line releaseNoteAfter use in saltwater, rinsing with fresh water and drying the reel is recommended. Availability and warranty depend on the store's current offer and the manufacturer's terms.