ATTACHED HOOKS AND READY SYSTEMS

Short OverviewGuru XS Carp Pole Rigs 6Inch are ready tied hooklengths for pole carp fishing, intended for anglers seeking reliability, quick preparation, and neat bait presentation. They are equipped with barbless hooks and tied on high-quality Guru N-Gauge line, making them an excellent choice for commercial fisheries and intensive fishing.DescriptionThese ready tied 15 cm (6 inch) hooklengths are designed for pole carp fishing when quick changes, consistency, and secure hook-ups are key. XS spade end hooks feature a wide gape and a long, durable point, while the factory-tied hooklength with a figure-of-eight loop allows simple and quick connection to the main rig. Suitable for fishing with pellets, corn, maggots, and other baits for pole carp fishing.FeaturesReady tied 15 cm (6 inch) hooklengths for quick useXS spade end barbless hooksWide gape hook for secure hook-upsLong and durable hook point for reliable penetrationOptimal ratio of hook size to line diameter/breaking strainTied on high-quality Guru N-Gauge hook link lineFigure-of-eight loop for easy connectionTechnologyGuru N-Gauge line – high-quality hooklength line for reliability, resistance, and consistent performanceSpecificationsHooklength length15 cm (6 inch)MaterialGuru N-Gauge hook linkHook typeXS spade end, barblessHook shapeWide gape (extra wide gape)Hook pointLong, durable pointConnectionFigure-of-eight loopPurposePole carp fishingAvailable Variants0.22/100,22 mm, hook size 10, 9 lb (4,08 kg)0.19/120,19 mm, hook size 12, 7 lb (3,18 kg)0.17/140,17 mm, hook size 14, 6 lb (2,72 kg)0.15/160,15 mm, hook size 16, 5 lb (2,27 kg)0.13/180,13 mm, hook size 18, 4 lb (1,81 kg)AdvantagesSaves time because the hooklength is ready to fish straight out of the packConsistent factory tying for reliable results on the bankBarbless hooks make unhooking fish easierWide size range for different baits and fishing conditionsAn excellent choice for match and recreational pole fishingNoteAvailability of individual variants may vary depending on stock levels. Check local fishing regulations regarding the use of barbless hooks.

Quick overviewGuru Pole Special Rigs 8inch are ready-tied hooklengths for pole fishing, designed for a fine and natural bait presentation on natural waters. They are an excellent choice for targeting bream, skimmers, rudd and other silverfish, when hook sharpness, subtlety and reliability are crucial.DescriptionThese factory-tied 8-inch (20 cm) hooklengths are made for situations where you want a more natural bait fall and more secure hook-ups. The combination of Pole Special hooks made from black nickel wire and N-Gauge Pro line provides an excellent balance of finesse, strength and control, while the long hook shank makes unhooking your catch quicker and easier. They are especially suitable for fishing on natural waters and all situations where precise presentation is the key to success.FeaturesReady-tied hooklengths, 8 inches (20 cm) long.Designed for natural waters and natural bait presentation.The long hook shank allows faster and easier unhooking of fish.Micro barb for more secure hook holds.The hooklengths can be shortened if needed to suit fishing conditions.Compatible with 8-inch pins on Guru Large and XL Rig Case boxes.Suitable for bream, skimmers, rudd and other silverfish.TechnologyN-Gauge Pro line for precise and reliable presentation.Pole Special hooks with outstanding sharpness for secure hook-ups.Black nickel wire for a good strength-to-weight ratio.Long hook point for added security during the fight.SpecificationsHooklength length8 inches (20 cm)Hooklength materialN-Gauge Pro lineHook typeGuru Pole SpecialHook finishBlack nickel wireBarbMicro barbPurposePole fishing on natural watersSuitable fish speciesBream, skimmer, rudd, silverfishCompatibilityGuru Large and XL Rig Case, 8-inch pinsAdjustmentCan be shortened as neededAvailable variants0.08-22Line diameter 0,08 mm / hook size 220.09-20Line diameter 0,09 mm / hook size 200.10-18Line diameter 0,10 mm / hook size 180.11-16Line diameter 0,11 mm / hook size 160.13-14Line diameter 0,13 mm / hook size 14AdvantagesReady for immediate use without any additional tying.A more natural bait fall can bring more bites.Very sharp hooks increase hooking security.The long hook shank makes handling and unhooking easier.Multiple diameter and hook size combinations available to match the situation on the water.NoteThe availability of individual variants may vary depending on stock levels. Before fishing, check local rules regarding the use of micro barbed hooks.

Short overviewGuru Super LWG Ready Rig 6 Inch are ready-made hooklengths designed for fast, neat and efficient fishing on commercial waters. They are equipped with a barbless hook, a Micro Band on the hair, and a high-quality N-Gauge mono hooklength with a PTFE coating, making them an excellent choice for F1 carp, carp and similar silverfish.DescriptionThese ready-made hooklengths, 6 inches (15 cm) long, are designed for fishing techniques such as feeder, method feeder, waggler and match fishing. The banded hair rig setup allows quick and secure mounting of baits such as 4–8 mm pellets, corn, pieces of meat or maggots, while the neatly tied figure-of-eight loop ensures easy connection to the main rig.FeaturesReady-made hooklength, 6 inches (15 cm) longBanded hair rig setup with Micro BandSuper LWG barbless eyed hookN-Gauge mono hooklength with PTFE coatingKnotless knot tying for secure and neat presentationFigure-of-eight loop for quick connectionSuitable for 4–8 mm pellets, corn, meat and maggots8 pieces per packTechnologyN-Gauge mono line for reliability and good bait presentationPTFE coating for reduced glare and greater resistanceSpecificationsBrandGuruModelSuper LWG Ready Rig 6 InchLength6 inches (15 cm)MaterialN-Gauge mono hooklength with PTFE coatingRig typeBanded hair rigHook typeEyed hook, barblessTyingKnotless knotFinishFigure-of-eight loopPack size8 piecesApplicationFeeder, method feeder, waggler, match fishingRecommended baits4–8 mm pellets, corn, meat, maggotsAvailable variantsSize 12N-Gauge mono 6 lb (2,72 kg), 0,17 mmSize 14N-Gauge mono 6 lb (2,72 kg), 0,17 mmSize 16N-Gauge mono 5 lb (2,27 kg), 0,15 mmSize 18N-Gauge mono 4 lb (1,81 kg), 0,13 mmSize 20N-Gauge mono 3 lb (1,36 kg), 0,11 mmAdvantagesSaves time because the hooklength is ready to use straight out of the packExcellent bait presentation for cautious fish on commercial watersBarbless for sport fishing and easier unhooking of fishPTFE coating reduces glare and increases hooklength durabilityWide range of sizes to suit different baits and situationsNoteAvailability of individual sizes depends on stock levels. Before use, check venue rules regarding barbless hooks and permitted rigs.

Quick OverviewThe Guru LWGS Pole Rig 6 inch is a ready-tied hooklength for pole fishing and precise finesse fishing, designed for neat bait presentation and quick use on the bank. Thanks to the barbless LWG spade end hook, PTFE coating, and N-Gauge material, it is an excellent choice for fishing for silverfish and commercial cyprinids.DescriptionThis ready-tied 15 cm (6 inch) hooklength is intended for anglers who want a reliable, neatly tied, and consistent rig without wasting time on preparation. It particularly stands out in pole fishing, but it can also be used in match fishing and other finesse fishing techniques where natural presentation and quick hooklength changes are very important.FeaturesReady-tied 15 cm (6 inch) hooklength for fast preparation and easy use.Barbless LWG spade end hook for safer unhooking of fish.Tied with Guru N-Gauge hook link material for reliability and knot strength.PTFE coating reduces glare and increases hook durability.Very good bait presentation in finesse and precise fishing.Suitable for baits such as pellets, corn, maggots, meat, and casters.Loop for quick and neat connection to the main line or rig.TechnologyPTFE coated – the PTFE coating provides a discreet, low-reflective finish and extra durability.N-Gauge – quality hook link material known for reliability and good strength in finesse fishing.SpecificationsBrandGuruModelLWGS Pole Rig 6 inchHooklength length15 cm (6 inch)Hook typeLWG spade end, barblessHooklength materialN-Gauge hook link materialHook coatingPTFEIntended usepole fishing, finesse fishing, match fishingConnectionready-tied hooklength with loop for quick attachmentAvailable VariantsDiameter / hook size0.17 / 12Diameter / hook size0.15 / 14Diameter / hook size0.13 / 16Diameter / hook size0.13 / 18Diameter / hook size0.11 / 20BenefitsSaves time because the hooklength is factory-tied and ready to fish.An excellent choice for precise bait presentation on commercial lakes and canals.PTFE coating increases durability and reduces visible underwater glare.Barbless for easier and safer unhooking of fish.Multiple variants make it easier to choose according to the target fish and bait.NoteAvailability of certain variants may vary depending on stock levels. Before ordering, select the appropriate diameter and hook size combination according to the fishing conditions.

Quick overviewGuru Kaizen Pole Rigs 6inch are ready-tied pole hooklengths, designed for precise bait presentation and quick changes during fishing. Equipped with a barbless Kaizen hook, they are ideal for competitive and recreational silverfish fishing.DescriptionThese factory-tied 15 cm (6 inch) hooklengths are made from high-quality N-Gauge monofilament and fitted with a PTFE-coated wide gape spade-end hook. They are primarily intended for pole fishing, but are also an excellent choice for fine presentations in match fishing when speed, consistency and reliability are crucial.FeaturesReady-tied 15 cm (6 inch) hooklengthsBarbless Kaizen wide gape hookSpade end for a classic pole setupN-Gauge monofilament matched to hook sizeBlack finishReady for immediate use8 hooklengths per packTechnologyPTFE coating for smoother penetration and long-lasting hook sharpnessOffset Wasabi point for more efficient fish hookingSpecificationsBrandGuruModelKaizen Pole Rigs 6inchProduct codeGRR079Hooklength length15 cm (6 inch)MaterialN-Gauge monofilament with PTFE-coated spade-end hooksColourBlackHook typeWide gape, barbless, spade endHook pointOffset Wasabi pointPack size8 hooklengthsPurposePole fishing, match fishing, silverfishAvailable variants0.19/10Diameter 0,19 mm, hook size 10, breaking strain 7 lb (3,18 kg)0.17/12Diameter 0,17 mm, hook size 120.15/14Diameter 0,15 mm, hook size 14, breaking strain 5 lb (2,27 kg)0.15/16Diameter 0,15 mm, hook size 16, breaking strain 5 lb (2,27 kg)0.13/18Diameter 0,13 mm, hook size 18, breaking strain 4 lb (1,81 kg)0.11/20Diameter 0,11 mm, hook size 20, breaking strain 3 lb (1,36 kg)AdvantagesSaves time on the bank thanks to ready-tied, neatly tied hooklengthsVery good presentation of baits such as worms, pinkies, corn and small pelletsBarbless for easier and safer unhooking of fishReliable line diameter to hook size ratio for different fishing situationsAn excellent choice for competitors and more demanding recreational anglersNoteAvailability of individual variants may vary depending on stock levels. Before use, check local regulations regarding barbless hooks.

Short overviewGuru Bait Bands QM1 Ready Rig 15" are ready-tied hooklengths designed for fast, precise and efficient pellet fishing. They are an excellent choice for feeder and method feeder anglers who want reliable bait presentation, a sharp hook and a consistent finished rig without any extra tying.DescriptionThis ready-tied hooklength is equipped with a Guru QM1 barbless hook, a bait band for easy bait mounting, and high-quality N-Gauge line. The 15-inch (38,1 cm) hooklength provides the optimal hair length for presenting pellets and similar baits, while the micro silicone on the hook shank helps with correct positioning. It is ideal for commercial fisheries, method feeder, bomb and other situations where quick bait changes and consistent presentation are important.FeaturesReady-tied hooklengths in a 15" (38,1 cm) lengthGuru QM1 barbless hookPTFE hook coating for improved durability and long-lasting sharpnessBait band for quick and easy bait mountingMicro silicone on the hook shank for correct hair alignmentMade from strong Guru N-Gauge lineHooklengths are pre-tied on colour-coded EVA spoolsCompatible with Guru Rig Box boxes8 hooklengths per packTechnologyPTFE coating improves hook durability and sharpness retentionQM1 hook shape with a strongly curved profile and an in-turned point for secure hookingMicro bait band system allows quick bait changes and neat presentationSpecificationsBrandGuruModelBait Bands QM1 Ready Rig 15"Hooklength length15" (38,1 cm)MaterialN-Gauge line, QM1 hook with PTFE coating, micro silicone on the hook shankHook typeQM1, barblessBait mountingBait bandPackaging8 hooklengths per packWindingColour-coded EVA spoolCompatibilityFits Guru Rig Box boxesAvailable variants0.22/12Line diameter 0,22 mm / hook size 120.19/14Line diameter 0,19 mm / hook size 140.17/16Line diameter 0,17 mm / hook size 160.15/18Line diameter 0,15 mm / hook size 18AdvantagesSaves time because the hooklength is ready to fish straight awayExcellent for pellets and quick bait changes on the bankReliable hooking thanks to the QM1 hook shapeHigh build quality and consistency in every hooklengthPractical EVA spool packaging makes tackle organisation easierNoteAvailability of individual variants may vary depending on stock levels. Before use, check fishery rules, as many venues require barbless hooks.

Quick OverviewDaiwa Tournament Snelled Feeder Hooks 70 cm are premium pre-tied feeder hooks designed for anglers who demand reliability, consistent quality, and fast rig preparation. They are an ideal choice for feeder fishing when you want precise bait presentation and a ready-made hooklength ready to use.DescriptionThese ready-made feeder hooklengths are made from high-quality Japanese monofilament and designed for effective bait presentation in various feeder fishing situations. The 70 cm hooklength is especially well suited to fishing on commercial waters, lakes, canals, and slower rivers, where tidy rigs and consistent construction are important for solid hooksets and reliable fish playing.FeaturesPre-tied feeder hooks with 70 cm hooklengthMade from high-quality Japanese monofilamentIndividual quality control for greater reliabilityReady to use with no additional tying requiredSuitable for precise bait presentation in feeder fishingUniform construction and consistently tied knotsMade in JapanSpecificationsBrandDaiwaProduct NameTournament Snelled Feeder Hooks 70 cmSeries/ModelTournament 14464Product TypePre-tied feeder hooks with hooklengthIntended UseFeeder fishingHooklength Length70 cmHooklength MaterialJapanese monofilamentHooklength Diameter0,18-0,23 mm, depending on the variantQuality ControlIndividually tested hooks and hooklengthsCountry of OriginJapanAvailable VariantsHook SizeHooklength Diameter40,23 mm60,23 mm80,20 mm100,20 mm120,18 mmAdvantagesSaves time because the hooklength is ready immediately after taking it out of the packProvides reliable and consistent quality for every rigAllows neater and more natural bait presentationMultiple sizes and diameters for adapting to conditions on the waterAn excellent choice for both match and recreational feeder fishingNoteAvailability of individual variants may vary depending on stock levels. Before fishing, check the fishery rules regarding hook type and hook size.

Short OverviewDaiwa Tournament Corn Hooks 60 cm are high-quality snelled hooks designed for presenting corn and similar baits. They are made from premium Japanese hooklength material, and each hook is individually tested for reliability and secure fish-playing performance.DescriptionThis model from the Tournament series is designed for anglers looking for neatly prepared, reliable, and precise snelled hooks for feeder, carp, and coarse fishing. The 60 cm hooklength allows for a more natural bait presentation, while the different hook sizes and line diameters make it easier to adapt to conditions on the water.FeaturesSnelled hook with a 60 cm hooklength.Designed for presenting corn and similar grain baits.Premium Japanese hooklength material.Each hook individually tested for tensile and breaking strength.Reliable construction for precise and natural presentation.Made in Japan.SpecificationsBrandDaiwaSeriesTournamentProduct nameTournament Corn Hooks 60 cm - SnelledPurposeCorn and similar baitsHooklength60 cmHooklength materialPremium Japanese hooklengthQuality controlIndividually tested hooksCountry of originJapanAvailable VariantsHook sizeHooklength diameter10,33 mm20,30 mm40,25 mm60,25 mm80,23 mmAdvantagesSaves time when preparing your rig, as the hook is already neatly snelled.Verified strength provides extra confidence when playing fish.An excellent choice for fishing with corn on commercial and natural waters.Multiple variants allow easier adjustment to bait size and fish wariness.Japanese build quality ensures reliability and consistency.NoteAvailability of individual variants may vary depending on stock levels. Photos are for informational purposes, and the product is supplied according to the selected variant.

Short OverviewDaiwa Tournament Snelled Worm Hooks are ready-tied hooks for worm fishing, intended for anglers seeking reliability, precision, and consistent quality. The 60 cm hooklength and factory-tied hook save time on the bank and allow quick preparation for match, feeder, and general fishing.DescriptionThese Daiwa Tournament tied hooks are designed for fishing with natural baits, especially worms, when neat and secure bait presentation is important. Each hook comes pre-mounted on a 60 cm hooklength, making them a practical choice for competitive and recreational fishing. The pack of 10 ensures you always have a spare hooklength ready for quick replacement during fishing.FeaturesTied hooks for worm fishingHooklength length: 60 cmReady to use straight out of the packSuitable for match, feeder, and general fishingPack contains 10 piecesSpecificationsBrandDaiwaSeriesTournamentProduct NameSnelled Worm HooksProduct TypeHooks with hooklengthHooklength Length60 cmPack10 pcsAvailable VariantsHook SizeHooklength Diameter10,35 mm20,35 mm40,33 mm60,30 mm80,25 mm100,25 mmAdvantagesSave time because the hooks are factory-tiedConsistent quality and neat hooklength constructionA practical choice for worm fishing and quick rig changesMultiple sizes to suit the target fish and water conditionsNoteAvailability of individual variants depends on stock levels. Before purchase, choose the appropriate hook size and hooklength diameter according to your fishing technique and target fish species.

Quick OverviewMatrix Pellet Band sz 18 0,16 mm is a ready-made feeder hooklength with a pellet band, designed for quick and tidy bait presentation. It is an excellent choice for fishing on commercial waters when you need a reliable hooklength for pellets, dumbells, and similar baits.DescriptionThis Matrix hooklength is designed for anglers who want to save time on rig tying while maintaining consistent bait presentation. The band allows easy pellet mounting without drilling, while the combination of a size 18 hook and 0,16 mm line diameter provides a good balance between subtlety and reliability. It is suitable for feeder and method feeder fishing, especially when targeting carp, crucian carp, and bream.FeaturesReady-made hooklength with pellet band for quick riggingSize 18 hook for smaller and precise bait presentation0,16 mm line diameter for a good balance of strength and subtletyIdeal for mounting pellets without damaging the baitMedium band size suitable for different types of pelletsVery durable construction for reliable useSafe storage in Matrix hooklength boxesTechnologyMatrix Pellet Band system for quick and secure pellet mountingSpecificationsBrandMatrixProduct Name6" Pellet Band sz 18 0,16 mmHooklength Length6 in (15 cm)Hook Size18Line Diameter0,16 mmBand MaterialrubberPurposepellet attachmentStoragecompatible with Matrix hooklength boxesBenefitsSaves time as the hooklength comes pre-tied and ready for fishingProvides neat and consistent bait presentationA practical choice for feeder and method feeder fishingThe durable band securely holds the pellet during castingA reliable Matrix choice for match and recreational fishingNoteThe product is supplied as a ready-made hooklength in one version. Before purchase, check stock availability and match your tackle to the rules of the water you are fishing.

Short overviewMatrix 6" X-Strong Pole Size 16 0.18mm is a ready-tied hooklength for pole fishing, intended for anglers looking for reliability, neat presentation, and quick changes on the bank. The short 15 cm length, strong size 16 hook, and quality line make it an excellent choice for targeting larger fish on commercial and natural waters.DescriptionThis Matrix hooklength is developed for pole fishing and situations where strength, precision, and secure hookholds are required. The X-Strong design is especially suitable for intensive fishing on commercial lakes, but also for targeting carp, bream, and other hard-fighting fish when you want a ready-made, neatly arranged, and immediately usable rig end.FeaturesReady-tied hooklength with a length of 6" (15 cm)X-Strong hook for greater durability when playing fishHook size 16Line diameter 0,18 mmPower Micron line for reliable strength and consistencyBarbless spade-end hookPTFE hook coating for better penetration and durability8 ready-tied hooklengths in the packTechnologyPower Micron linePTFE coated hookX-Strong constructionSpecificationsBrandMatrixModelX-Strong PoleHooklength length6" (15 cm)Hook size16Hook typeBarbless, spade-endHook coatingPTFELine diameter0,18 mmLine materialPower Micron lineBreaking strain6,4 lb (2,9 kg), approximatelyPack quantity8 hooklengthsPurposePole fishingSKUGRR031AdvantagesReady to use without additional tyingAn excellent choice for fast and efficient match fishingStrong construction for more secure control of larger fishShort hooklength allows more precise bait presentationPTFE hook helps achieve better hook penetration and more reliable hookholdsNoteThe product is supplied as a ready-tied hooklength ready for use. Before purchase, check that the length, hook size, and line diameter match your rig and fishing conditions.

Short OverviewThe Matrix X-Strong Pole is a ready-tied pole rig designed for anglers seeking reliability, quick changes, and greater durability when fishing commercial waters. A length of 15 cm, size 18 hook, and 0,16 mm line make it an excellent choice for precise presentation of larger baits. It is especially suitable when strength and security are needed while landing fish.DescriptionThis Matrix hooklength has been developed for pole fishing and situations where standard fine hooklengths are not enough. The X-Strong construction provides extra strength and durability, while the barbless hook allows use on waters and in competitions where such hooks are mandatory. It is ideal for fishing with larger baits such as meat, corn, and paste, especially on commercial lakes where stronger specimens and more intense fights are expected.FeaturesReady-tied pole rig prepared for quick use.6 inch (15 cm) hooklength for neat and consistent presentation.Size 18 hook combined with 0,16 mm line.X-Strong construction for greater strength and resistance.Barbless for fishing on waters with such rules.Suitable for larger baits such as meat, corn, and paste.Designed for fishing when greater carrying capacity and durability are required.TechnologyX-Strong construction – reinforced design for greater strength and reliability when fishing for larger fish.Barbless design – hook without a barb for easier unhooking and compliance with the rules of many commercial waters.SpecificationsBrandMatrixProduct codeGRR032Product typeReady-tied pole rigLength6 inches (15 cm)Hook size18Line diameter0,16 mmHook typeBarblessConstructionX-StrongPurposePole fishing / direct pole fishingRecommended baitsMeat, corn, pasteRecommended watersCommercial watersAdvantagesSaves time because the rig is already ready to use.Offers better security when fishing for larger and stronger fish.An excellent choice for fishing with larger baits.Practical for both match and recreational direct pole fishing.Consistent quality and reliable craftsmanship from the renowned Matrix brand.NoteProduct availability depends on stock levels. The manufacturer may occasionally change packaging details or minor technical elements without prior notice.

Short OverviewThe Guru Speedstop Ready Rig 15" is a ready-made feeder hooklength designed for anglers who want quick setup, neat bait presentation, and a reliable end tackle arrangement. Thanks to the pre-fitted Speedstop stopper and high-quality construction, it is an excellent choice for method feeder and classic feeder fishing.DescriptionThis ready-made 15-inch (38,1 cm) hair rig hooklength is designed for efficient and fast bait mounting without any additional tying. The Speedstop at the end of the hair makes it easy to mount pellets, dumbbells, corn, and similar baits, while the PTFE coated QM1 hook and N-Gauge hooklength material provide security and consistency on every cast. The hooklength is suitable for fishing on commercial and natural waters, especially when precise and neat bait presentation alongside the feeder is important.FeaturesReady-made hair rig hooklength for feeder and method feeder fishingHooklength length 15" (38,1 cm)Speedstop stopper at the end of the hair for quick bait mountingOptimal hair length for a more natural presentationMicro silicone on the hook shank for stable hair positioningKnotless knot for a reliable end tackle setupFigure of 8 loop for quick and easy connectionSuitable for pellets, corn, dumbbells, and other hair rig baitsTechnologyPTFE coated QM1 hook – QM1 hook with PTFE coating for better penetration and durabilityN-Gauge line – quality hooklength material tailored for feeder fishingSpecificationsBrandGuruProduct nameSpeedstop Ready Rig 15"Product typeReady-made hair rig hooklengthPurposeFeeder / Method feederLength15" (38,1 cm)Hooklength materialN-Gauge lineHookPTFE coated QM1 hookRigHair rig with Speedstop stopperAdditional detailsMicro silicone on the hook shank, knotless knot, figure of 8 loopAvailable VariantsVariantSpecification10-0.25MMHook size 10, diameter 0,25 mm, breaking strain 12 lb (5,44 kg)12-0.22MMHook size 12, diameter 0,22 mm14-0.22MMHook size 14, diameter 0,22 mm16-0.19MMHook size 16, diameter 0,19 mmAdvantagesSaves time because the hooklength is ready to useMakes quick and secure bait mounting on the hair easierNeat and consistent presentation for greater confidence while fishingHigh-quality Guru end tackle setup for reliable performance on the bankAn excellent choice for catching carp, bream, and other coarse fish using feeder techniquesNoteAvailability of certain variants may vary depending on stock levels. Before fishing, check that the hook and hooklength diameter comply with the rules of the water you are fishing.

Quick OverviewGuru Bayonets QM1 Ready Rig 15" are ready-tied hooklengths designed for fast and efficient fishing on commercial waters. They are equipped with a barbless QM1 hook, a Guru Bayonet for quick bait mounting, and N-Gauge line for reliable presentation. They are an ideal choice for carp and F1 fishing on method feeder, hybrid feeder, and waggler setups.DescriptionThese ready-tied hooklengths are designed for anglers who want to save time and achieve a neat, consistent bait presentation. The Guru Bayonet allows quick mounting of wafters, mini boilies, and pop-up baits without unnecessary hassle, while the micro silicone on the hook shank helps keep the bait in the optimal position. The 15-inch (38 cm) hooklength makes them a highly versatile solution for method feeder and other popular techniques on commercial lakes.FeaturesReady-tied hooklengths with a length of 15 inches (38 cm)Guru Bayonet for quick and easy bait mountingSuitable for wafters, boilies, and pop-up baitsBarbless QM1 hook with a short shank and aggressively curved shapeSharp, curved, slightly offset hook point for secure hookingPTFE coating on the hook for greater durability and long-lasting sharpnessN-Gauge line for reliability and abrasion resistance in fishing0,3 mm micro silicone on the hook shank for stable bait positioningSemi-balanced wafter baits stand upright above the bottom8 hooklengths per packWound onto EVA spools compatible with Guru Rig BoxesTechnologyPTFE coating on the QM1 hook for greater durability and sharpnessQM1 hook shape developed for commercial fishingGuru Bayonet system for quick bait mountingGuru N-Gauge line for reliable presentation and strengthSpecificationsBrandGuruModelBayonets QM1 Ready Rig 15"Hooklength Length15 inches (38 cm)Hooklength MaterialN-Gauge lineHookBarbless QM1, PTFE coatingMicro Silicone0,3 mmBait Mounting SystemGuru BayonetPurposeWafters, boilies, pop-up baitsRecommended TechniquesMethod feeder, hybrid feeder, wagglerPack Quantity8 pcsPackagingEVA spools compatible with Guru Rig BoxesAvailable VariantsHook Size10Line Diameter0,25 mmHook Size12Line Diameter0,22 mmHook Size14Line Diameter0,19 mmHook Size16Line Diameter0,17 mmAdvantagesSaves time thanks to pre-tied hooklengthsAllows quick bait changes during fishingProvides neat and consistent bait presentationAn excellent choice for carp and F1 fishing on commercial watersThe quality hook and line inspire extra confidence during the fightNoteAvailability of individual variants depends on stock levels. Before use, check local regulations regarding barbless hooks and the manufacturer's warranty terms.

Short overviewGuru Speedstop QM1 Ready Rig 15" are ready-tied hooklengths designed for quick and neat pellet presentation in feeder fishing. They are equipped with a PTFE-coated QM1 hook, a Speedstop bait holder, and strong Guru N-Gauge monofilament, making them an excellent choice for fishing on commercial waters and in situations where fast bait changes are important.DescriptionThese ready-tied hooklengths were developed for fishing with softer hookbaits, especially soft and drilled pellets. The 15" (38 cm) length provides optimal presentation, while the Speedstop at the end allows easy bait mounting without slipping. Thanks to factory-tied knots and consistent construction, they are ideal for feeder fishing, the method feeder approach, and fishing on commercial fisheries where precision and reliability are key.FeaturesReady-tied hooklengths, 15" (38 cm) longDesigned for softer baits and drilled pelletsSpeedstop holder for quick and secure bait mountingMicro silicone on the hook shank for proper presentationExtra-strong monofilament for reliable fish-playing performanceQuick and easy bait replacement8 pieces per packSupplied on EVA spools or hooklength spoolsTechnologyPTFE coated QM1 hookGuru N-Gauge lineSpecificationsBrandGuruModelSpeedstop QM1 Ready Rig 15"Length15" (38 cm)Product typeReady-tied hooklengthsHookQM1 with PTFE coatingLineGuru N-Gauge monofilamentIntended useSofter hookbaits and drilled pelletsAccessoriesSpeedstop and micro siliconePackaging8 piecesAvailable variantsHook size / diameter10 - 0,25 mmHook size / diameter12 - 0,22 mmHook size / diameter14 - 0,19 mmHook size / diameter16 - 0,17 mmAdvantagesSave time as they are ready to fish straight awayProvide neat and consistent pellet presentationThe QM1 hook offers secure hooking and good fish-holding performanceThe Speedstop system makes quick bait mounting easierN-Gauge monofilament provides excellent strength and durability in fishingNoteAvailability of individual variants depends on stock levels. Before use, check whether the selected hook size and hooklength diameter are suitable for the conditions on the water and current fishing regulations.

Short OverviewGuru Bayonets Ready Rig 15" are ready-made hooklengths designed for fast and secure bait presentation in feeder fishing and on commercial fisheries. They are equipped with a PTFE-coated QM1 hook and a bayonet bait holder that allows easy mounting of boilies, wafters, and pop-up baits. They are an ideal choice for anglers who want a reliable ready-made rig and maximum efficiency on the bank.DescriptionThese factory-tied 15-inch (38,1 cm) hooklengths are made from Guru N-Gauge nylon and feature the distinctive QM1 hook with a short shank, aggressively curved shape, and curved point. The bayonet bait holder speeds up rigging and provides secure bait retention even during powerful and long-distance casts. Thanks to the optimal hair length and the micro silicone addition on the hook shank, these hooklengths are excellent for wafters, boilies, and pop-up baits in modern feeder fishing.FeaturesReady-made 15-inch (38,1 cm) hooklengthsMade from Guru N-Gauge nylonPTFE-coated QM1 hook for durability and sharpnessBayonet holder for quick bait mounting0,3 mm micro silicone on the hook shankOptimal hair length for wafters, boilies, and pop-up baitsAggressively curved hook shape with a short shankCurved offset hook point for secure hookingWound onto hooklength spools for neat storageCompatible with Guru Rig Box boxes8 hooklengths per packTechnologyPTFE coating for smooth penetration, resistance, and long-lasting hook sharpnessMicro silicone addition for correct positioning of the hair and baitQM1 hook pattern for aggressive hook turning and effective fish hookingSpecificationsBrandGuruModelBayonets Ready Rig 15"Hooklength length15 inches (38,1 cm)MaterialN-Gauge nylon, PTFE-coated QM1 hookTackle typeReady-made hair rig with bayonet bait holderBait typeBoilies, wafters, pop-up baitsHook addition0,3 mm micro siliconeHook shapeShort shank, strongly curved shape, curved offset pointPackaging8 hooklengths per packCompatibilityGuru Rig BoxesAvailable VariantsHook sizeNylon diameter100,25 mm120,22 mm140,22 mm160,19 mmAdvantagesFast and easy bait mounting without additional tackleSecure bait retention during the cast and while fishingFactory-tied hooklengths for consistent quality and reliabilityAn excellent choice for feeder fishing on commercial lakesPractical storage and organization of hooklengths on spoolsNoteAvailability of individual variants depends on stock levels. Before purchase, it is recommended to choose the hook size and nylon diameter according to the target fish and fishing method.