Novosti

Short OverviewThe Drennan Side Pull Bead is a practical puller kit bead that allows secure elastic retention and precise tension control during the fight. It is intended for anglers fishing with whip and pole systems who want smooth, reliable, and fast adjustment of the elastic system.DescriptionThese beads act as elastic tensioners, allowing the elastic section to be pulled out and finely adjusted according to the situation on the water. They are especially useful in match and commercial fishing, when complete control over elastic performance is important while targeting carp, F1 fish, and other powerful silverfish. Thanks to the thermoplastic rubber construction and reliable knot grip, the Drennan Side Pull Bead ensures a smooth and secure connection within modern puller kits.FeaturesSecurely holds the elastic in place during fishingAllows fine tension adjustment by pulling the elastic outwardSmooth and reliable connection point for modern puller kitsFirmly retains the elastic knotSuitable for solid and hollow pole elasticsDifferent hole diameters for different elastic diametersColour matched to Drennan Carp Bungee elastics and diametersWear-resistant material for long-lasting useTechnologyColour coded system for easier selection of the correct bead according to the diameter of Drennan bungee elasticsGripper bead design for secure elastic retention and stable performance in the puller kitSpecificationsBrandDrennanProductSide Pull BeadPurposePuller kit bead / elastic tensionerMaterialThermoplastic rubberCompatibilitySolid and hollow pole elasticsFunctionHolds the elastic in place and allows tension adjustmentApplicationPole fishing, whip fishing, commercial carp and F1 fishingPackaging10 pcsAvailable VariantsSmallLargeAdvantagesGreater control over elastic performance during the fightQuick and easy adjustment without complicated setupSecure knot retention and reduced risk of slippingReliable solution for modern pole and puller kit systemsSuitable for different types and diameters of elasticsNoteAvailability depends on the selected variant. Before purchase, check whether the chosen size matches the elastic diameter and your puller kit.

Quick OverviewBlack Cat Propeller Rattles are rattling accessories for catfish fishing that are mounted on the leader directly above the bait. They are intended for anglers who want to increase the attractiveness of live or dead bait with sound, vibration, and rotation, especially in murky water, low-visibility conditions, and at night.DescriptionThis catfish fishing accessory allows flexible mounting on the leader between two stoppers, directly above the bait. The propeller starts spinning even in a light current and creates rotational turbulence and a rattling sound that can trigger a catfish reaction. It is suitable for various catfish fishing approaches with natural baits when the presentation needs to be given extra visual and acoustic emphasis.FeaturesRattling propeller for mounting on the leader above the baitStarts moving even in a light currentCreates rotational turbulence and an acoustic signalSuitable for live and dead baitFlexible mounting between two stoppers on the leaderPack contains 2 piecesTechnologyInternal lead rattle inside the propeller for an additional sound effectGlow in the dark version for better visibility in darkness and murky waterSpecificationsBrandBlack CatProduct typeRattling propeller for catfish fishingIntended useCatfish fishing with live or dead baitMountingOn the leader between two stoppers, directly above the baitMaterialPropeller with internal lead rattleAvailable dimensions2,4 cm; 3,0 cmPack contents2 piecesSeries coloursBlack, Glow in the dark, Fluo orangeAvailable VariantsBlack 2.4cmGlow 3cmAdvantagesIncreases bait visibility and attractiveness without complicated riggingEnhances the bait's signal with sound and vibrationEffective in low visibility, at night, and in murky waterWorks even in a light currentEasy to incorporate into different catfish rigsNoteAvailability depends on the selected variant. Before fishing, check that it is correctly mounted on the leader and that all connections are in good condition.

Quick OverviewKorda Safety Inline Sleeve Naked is a safety sleeve for carp naked rigs with inline leads, designed for fishing without a leader or tubing. It protects the knot, maintains a tidy presentation, and helps ensure safe lead release when snagged.DescriptionThis Korda sleeve was developed for anglers who use inline leads directly on the main line, without an additional leader. Thanks to its streamlined, elongated shape and fine inner core, it enables a neat rig setup, better connection protection, and reliable system performance in carp fishing.FeaturesFits all Korda inline leadsSuitable for fishing without a leader and without tubingThe insert fits all Korda size 8 swivelsElongated and streamlined designFine inner core for a better fit and system protectionHelps ensure safe lead release in case of a snagTechnologyStreamlined design for a tidier rig profile and better casting aerodynamicsFine inner core for more precise fitting on the rig and additional knot protectionSpecificationsBrandKordaModelSafety Inline Sleeve NakedProduct typeSafety sleeve for inline leadsPurposeNaked rigs without a leader or tubingCompatibilityAll Korda inline leadsSwivel compatibilityKorda size 8 swivelsDesignElongated, streamlinedInner constructionFine inner coreMaterialFlexible polymerApplicationCarp fishing with inline systemsAvailable VariantsSmallMediumLargeAdvantagesImproved fish safety thanks to the lead release functionProtects the knot and reduces wear on the main lineProvides a tidier and more reliable inline rig setupAn excellent choice for anglers who want to fish without a leaderCompatible with Korda inline leads and size 8 swivelsNoteAvailability of individual sizes may vary. Before fishing, it is recommended to check the sleeve fit and the safe lead release function.

Quick OverviewThe Korda Safety Inline Sleeve is designed for the safe and tidy construction of inline rigs in carp fishing. It is designed for use with nano tubing and leadcore leaders, providing stable presentation with safe lead release when needed.DescriptionThis safety inline sleeve is an important part of terminal tackle for anglers who want a reliable, aerodynamic, and safe rig. It is suitable for various inline leads, fits perfectly on a size 8 swivel system, and is especially practical for fishing with Solid Bag rigs, where compactness and neat presentation are key.FeaturesFits all inline leadsCompatible with nano tubing and leadcore leadersInsert fits all Korda size 8 swivelsAerodynamic, streamlined designExcellent choice for Solid Bag rigsAvailable in 3 lengthsPack contains 10 piecesTechnologySafety inline system for controlled and safe lead release under loadStreamlined shape for a neater rig and better casting performanceSpecificationsBrandKordaProduct TypeSafety Inline SleevePurposeTerminal tackle for carp fishingCompatibilityNano tubing and leadcoreLead compatibilityAll inline leadsSwivel compatibilityKorda size 8 swivelDesignAerodynamic (streamlined)ApplicationClassic inline rigs and Solid Bag rigsAvailable lengths3Pack size10 piecesAvailable VariantsSmallFor inline leads from 1.1 oz to 8 oz (31,18 g to 226,80 g)MediumFor inline leads from 1.1 oz to 8 oz (31,18 g to 226,80 g)LargeFor inline leads from 1.1 oz to 8 oz (31,18 g to 226,80 g)AdvantagesIncreases rig safety in the event of breakage or under loadHelps keep the rig neat and effectiveMakes it easier to build reliable inline systems for different situationsCompatible with popular Korda componentsA practical choice for anglers using Solid Bag presentationNoteAvailability of individual sizes depends on stock status. Before purchasing, check whether the selected variant matches your leader, swivel, and inline lead.

Short OverviewFox Edges Heli-Clip Rigs Leadcore 3pcs are ready-made carp leaders for helicopter rigs, designed for quick setup and reliable bottom presentation. The 75 cm length and leadcore construction help the system lie tight to the bottom, while the included components reduce the risk of tangles. They are an excellent choice for carp fishing when you want a neat and efficient leader ready to use straight away.DescriptionThis Fox Edges leader is intended for anglers who want a pre-assembled, high-quality system for helicopter rigs. It is made from 50 lb leadcore material and fitted with a spliced loop at one end for easy connection to the main line, and a Speed Link clip at the other end for quick lead attachment. The pack includes all the key small components for a neat final setup, making it a practical solution for carp fishing on different types of bottom.FeaturesReady-made leadcore leaders for helicopter rigsLength of each leader: 75 cmMade from 50 lb leadcore materialSpliced loop at one end for easy connection to the main lineSpeed Link clip at the other end for attaching the leadPack contains 3 leadersIncludes 3 x Heli Buffer SleeveIncludes 3 x Tapered Bore BeadIncludes 3 x 0,5 mm Leader SiliconeIncludes 3 x size 7 Heli SwivelIncludes 3 x Micro Speed LinkIncludes 3 x Micro Anti Tangle SleeveIdeal for a neat and efficient helicopter presentationTechnologyPatented Fox Heli-ClipFox Edges Naturals rig componentsSpecificationsBrandFoxSeriesEdgesModelHeli-Clip Rigs Leadcore 3pcsProduct typeReady-made leadcore leaders for helicopter rigsMaterial50 lb LeadcoreLength75 cmNumber of pieces in pack3Main line connectionSpliced loopLead connectionSpeed Link clipIncluded components3 x Heli Buffer Sleeve, 3 x Tapered Bore Bead, 3 x 0,5 mm Leader Silicone, 3 x size 7 Heli Swivel, 3 x Micro Speed Link, 3 x Micro Anti Tangle SleevePurposeCarp fishing, helicopter rigEANCAC908Available VariantsNaturals 50lb50 lb leadcore, Edges NaturalsCamo 50lb50 lb leadcore, CamoAdvantagesSaves time because the leader is ready for fishingLeadcore helps the system follow the bottom discreetlyComplete terminal components in the pack make rig assembly easierSuitable for anglers who want a reliable and neat helicopter presentationFox quality and proven Edges components provide extra confidence on the bankNoteAvailability depends on the selected variant. Before purchase, check the colour and breaking strain, and for warranty and delivery information please see the store terms.

Quick OverviewFox Edges Naturals Heli-Clip Rigs 50lb Copper Core are ready-made leaders for carp fishing, designed for a safe and tidy heli presentation. The heavy and very supple Copper Core quickly sinks and follows the bottom contour exceptionally well, while the Edges Naturals dark green shade ensures a more discreet presentation in the water. They are ideal for anglers who want to quickly set up a reliable rig without additional tying and connecting of components.DescriptionThis ready-made heli leader was developed for efficient and practical use in carp fishing, especially when a neat presentation is needed on different types of bottom. The total length of 75 cm and the pre-prepared spliced loop allow quick connection to the main line, while the Speed Link makes attaching the lead easy. Thanks to its suppleness and greater mass compared to other lead-free leaders, Copper Core hugs the bottom better and helps achieve a more discreet presentation of the terminal rig.FeaturesReady-made Heli-Clip leader, ready to fish75 cm length for a neat and functional heli rigMade from 50 lb Copper Core material with a copper chain insert coreVery supple construction that follows the bottom wellHeavier than many other lead-free leaders for better contact with the bottomSpliced loop for quick connection to the main lineSpeed Link for easy lead attachmentEdges Naturals dark green colour for a discreet presentationPack contains 3 ready-made leadersSupplied in a recyclable cardboard boxTechnologyProprietary Leader Beads for reliable heli system performancePatented Fox Heli-Clip for safe and practical useHeli Swivels for smooth rotation and rig functionalitySpecificationsBrandFoxRangeEdges NaturalsProduct typeReady-made Heli-Clip leaderLength75 cmMaterial50 lb Copper Core, braided leader with a copper chain insert coreBreaking strain50 lb (22,68 kg)ColourEdges Naturals, dark greenLine connectionSpliced loopLead connectionSpeed LinkIncluded components3 x Heli Buffer Sleeves, 3 x Tapered Bore Beads, 3 x 0,5 mm Leader Silicone, 3 x Size 7 Heli Swivel, 3 x Micro Speed Links, 3 x Micro Anti Tangle SleevesQuantity per pack3 pcsPackagingRecyclable cardboard boxProduct codeCRT004BenefitsSaves time because the leader is already assembled and ready to useHugs the bottom exceptionally well thanks to the heavier Copper Core constructionThe discreet dark green colour helps with an unobtrusive presentationQuality Fox components increase system reliabilityReduces the chance of tangles during casting and fishingA practical solution for anglers who want a neat and proven heli systemNoteThe product is supplied in a pack of 3 pieces. Use is recommended in accordance with fishery rules and applicable angling regulations.

Quick OverviewFox Edges Tuff Tungsten Tubing Heli-Clip Rigs are ready-made helicopter leaders for carp fishing, designed for a safe and neat rig presentation. The robust tungsten tubing provides greater durability, hugs the lakebed well, and helps reduce tangles during casting.DescriptionThese ready-made heli leaders are designed for anglers who want to quickly set up a reliable and discreet helicopter rig without the need to tie additional components. Thanks to the Tuff Tungsten Tubing material and pre-fitted components, this product is suitable for carp fishing on waters where durability, good camouflage, and safe rig release in the event of a snag are important.FeaturesReady-made helicopter leaders ready to useLeader length 50 cmMade from Tuff Tungsten TubingPre-fitted Heli Tubing Leader SleevesHard tungsten beads with a groove for release when snaggedTubing Save sleeve for protecting the tubing and main lineIncludes 3 micro anti-tangle sleevesColour: natural dark green with black camo flecksPack contains 3 piecesTechnologyTuff Tungsten Tubing – stronger and more robust tungsten tubing compared to softer variantsHeli Tubing Leader Sleeves – sleeves for a neat and secure helicopter rigHard Tungsten Beads – hard tungsten beads for controlled release when snaggedSpecificationsBrandFoxSeriesEdgesModel NameTuff Tungsten Tubing Heli-Clip RigsSKUCRT005Length50 cmMaterialTuff Tungsten TubingColourNatural dark green with black camo flecksProduct TypeReady-made helicopter leadersPack Contents3 pcsIncluded ComponentsHeli Tubing Leader Sleeves, hard tungsten beads, Tubing Save sleeve, 3 x micro anti-tangle sleevesAdvantagesQuick helicopter rig setup without additional assemblyGreater durability and resistance than softer tungsten tubingBetter lakebed hugging and a more discreet presentationReduced chance of tangles during castingSafer rig function in snag situationsNoteThe product is supplied in a pack of 3 pieces. Before fishing, check correct rig assembly and compatibility with the other components of the setup.