Novosti

Short overviewPrologic Mimicry Green Helo 1000 m is a high-quality monofilament line developed for discreet and effective freshwater fishing. Thanks to its advanced copolymer material, reduced stretch, and improved sinking properties, it is an excellent choice for carp fishing and situations where sensitivity, reliable hook sets, and neat rig presentation are important.DescriptionMimicry Green Helo uses a camouflage green colour in three shades so the line blends in with its surroundings and the bottom as effectively as possible. The improved monofilament construction ensures a very good strength-to-diameter ratio, a smooth surface for easier casting, and low memory for neater spooling on the reel. It is suitable for carp fishing, bottom fishing, and other techniques where sinking, discretion, and reliability during the fight are important.FeaturesMonofilament made from advanced copolymer materialSpool length: 1000 mColour: Mimicry Green Helo, three shades of greenReduced stretch for better sensitivity and more secure hook setsIncreased density for better sinkingLow memory for neater spooling and less tanglingHigh knot strengthVery smooth and slick surface for easier and longer castsImproved camouflage properties in the waterTechnologyAdvanced co-polymer materialMaximised strength-to-diameter ratioSpecificationsBrandPrologicModelMimicry Green Helo 1000mTypeMonofilament lineMaterialAdvanced copolymerLength1000 mColourMimicry Green Helo, three shades of greenKey propertiesReduced stretch, increased density, low memory, high knot strength, smooth surfacePurposeCarp and general freshwater fishingAvailable variantsVariantBreaking strain0,25 mm11 lb / 5,2 kg0,28 mm13 lb / 6,2 kg0,30 mm15 lb / 7,1 kg0,33 mm18 lb / 8,3 kg0,35 mm21 lb / 9,8 kgAdvantagesDiscreet presentation thanks to the three-tone green camouflageBetter contact with the bait due to reduced stretchFaster sinking and a more stable line position along the bottomExcellent diameter-to-breaking strain ratioReliable performance during casting and fighting fishLarge 1000 m spool ideal for filling a reelNoteAvailability of certain diameters depends on stock levels. We deliver the product in the manufacturer’s original factory packaging from Prologic.

Short overviewThe Prologic CDX Rod Holdall is designed for the safe transport of up to three carp rods with a length of 13 ft (3,96 m). The fully padded construction, padded reel dividers, and waterproof base provide reliable protection for your equipment on the way to the water and during demanding fishing sessions.DescriptionThis rod holdall was developed for anglers looking for neat organization, good protection for blanks, guides, and reels, and durability in everyday use. It is made from durable 600D MCP camo rip-stop fabric, and thanks to the robust 10 mm HD zipper and adjustable shoulder strap with metal buckle, it is very practical for carp fishing and transporting gear across different terrain.FeaturesCapacity for 3 rods with a length of 13 ft (3,96 m)Fully padded interior for better gear protectionPadded reel dividersDurable 600D MCP camo rip-stop fabricWaterproof base for placing on wet groundRobust 10 mm HD zipperAdjustable shoulder strap with metal buckleDimensions: 212 x 35 x 19 cmSpecificationsBrandPrologicModelCDX Rod HoldallProduct typeRod holdallCapacity3 rodsCompatible rod length13 ft (3,96 m)Dimensions212 x 35 x 19 cmMaterial600D MCP camo rip-stop fabricColorMCP camoInteriorFully paddedReel dividersPaddedBaseWaterproofZipper10 mm HD zipperStrapAdjustable shoulder strap with metal buckleAdvantagesProtects blanks, guides, and reels during transportDurable materials for long-lasting use in the fieldThe waterproof base reduces equipment contact with moistureConvenient carrying thanks to the adjustable strapAn excellent choice for organized and safe transport of carp gearNoteThe holdall is supplied without rods and reels. Product availability and delivery time depend on stock status.

Short overviewThe Prologic CDX Rod Holdall is a practical and robust case for the safe transport of up to 3 rods with a length of 12 ft (3,66 m). Its fully padded construction, durable 600D rip-stop fabric, and waterproof base make it an excellent choice for carp anglers who want reliable protection for their equipment.DescriptionThis holdall is designed for anglers who value secure storage and easy transport of rods to the bank. The Prologic CDX Rod Holdall is made from durable MCP camo 600D rip-stop fabric, with a fully padded interior that helps protect rods during transport and storage. A robust 10 mm HD zipper and a waterproof, reinforced base further enhance durability and practicality for everyday use in carp fishing.FeaturesCapacity for up to 3 rods with a length of 12 ft (3,66 m)Fully padded construction for better equipment protectionDurable MCP camo 600D rip-stop fabricRobust 10 mm HD zipperWaterproof and reinforced base with an outer rip-stop layerAdjustable shoulder strap with metal buckle for easier carryingSpecificationsBrandPrologicModelCDX Rod HoldallCapacity3 rodsFor rod length12 ft (3,66 m)Dimensions198 x 35 x 19 cmMaterialMCP camo 600D rip-stop fabricZipper10 mm HDStrapAdjustable shoulder strap with metal buckleBaseWaterproof, reinforced, with outer rip-stop layerEAN5706301571632AdvantagesProtects rods from bumps and scratches during transportDurable material suitable for frequent outdoor useThe waterproof base helps when placing it on damp surfacesConvenient to carry thanks to the adjustable shoulder strapAn excellent choice for organized and safe transport of carp fishing gearNoteThe product is supplied as a rod holdall without any additional equipment that may be shown in the photos. The information is provided by the manufacturer and may serve as an informative guideline when choosing.

Quick OverviewThe Prologic K1 Buzzer Bar 3 Rod 35 cm is a high-quality buzzer bar for carp fishing, designed for anglers looking for a stable and reliable setup for three rods. Thanks to the Easy-Tilt system and sturdy aluminium construction, it allows quick adjustment and secure use on the bank.DescriptionThis Prologic buzzer bar is designed for anglers who want neat, stable, and practical organisation of three rods on banksticks. The goal post construction provides extra stability, while the Easy-Tilt system allows easy adjustment of the rod angle according to the conditions at the swim, whether you are fishing with raised rod tips or lower toward the water. It is an ideal choice for modern carp setups with bite alarms and rod rests.FeaturesBuzzer bar for 3 rodsWidth 35 cmEasy-Tilt system for quick angle adjustmentStrong cam-lock system for secure fixingLocking nut for bite alarm and rod rest16 mm diameter tubes for extra strengthBlack anodised aluminium constructionGoal post design for better setup stabilityTechnologyEasy-Tilt system for simple and precise adjustment of rod anglesStrong cam-lock system for firm and reliable position lockingSpecificationsBrandPrologicModelK1 Buzzer Bar 3 RodPurposeFor 3 rodsWidth35 cmMaterialBlack anodised aluminiumColourBlackWeight300 gTube Diameter16 mmConstructionGoal postSystemsEasy-Tilt, cam-lockCompatibilityBite alarms and rests with standard threadEAN / code57153BenefitsStable setup for three rods during carp fishingQuick angle adjustment without complicated assemblyStrong and lightweight aluminium constructionCorrosion resistance and long service lifeExcellent compatibility with most standard alarms and restsNoteThe product is supplied as one buzzer bar. Bite alarms, rod rests, and banksticks are not included in the package.

Short OverviewSavage Gear 3D Reaction Crayfish 5,5 cm Kit 3+1 is a compact soft lure that faithfully imitates a crayfish and provides a very natural bottom presentation. It is intended for anglers looking for a ready-to-fish solution for zander, perch, chub, bass, and other predators.DescriptionThis kit was developed for situations where a subtle yet highly convincing presentation is needed. Thanks to its 3D shape based on a scan of a real crayfish, the subtle movements of the legs and antennae, and the option of added sound stimulation, this lure is an excellent choice for bottom fishing, light jigging, hop & stop, and working structure in clear or heavily pressured water.FeaturesRealistic crayfish imitation made from a 3D scan of a real crayfishNatural micro-movements of the legs and antennae during the fall and retrieveRattle chamber in the head for extra attractionRemovable glass rattle for presentation adjustmentBack slot for weedless presentation with EWG hooksReady-to-fish kit: 3 lures of 5,5 cm and 1 round jig head size #2Technology3D scan technologyRemovable glass rattleSpecificationsBrandSavage GearProduct name3D Reaction Crayfish 5.5cm Kit 3+1Lure length5,5 cmProduct typeSoft lure - crayfish imitationKit contents3x Reaction Crayfish (5,5 cm) + 1x Round Jighead (#2)Jig headRound jig headHook size#2Special featureRattle chamber with removable glass rattleRiggingBack slot for weedless presentation with EWG hooksAdvantagesHighly convincing crayfish imitation for bottom fishingExcellent choice for cautious predators in clear waterReady-to-fish pack for a quick trip to the waterAdjustable presentation with sound effect and weedless rigging optionSuitable for multiple soft lure presentation techniquesNoteProduct availability depends on stock status. For complete technical data and all versions, checking the manufacturer's official documentation is recommended.

Quick OverviewThe Savage Gear 3D Roach 10 cm 18 g set is a collection of realistic soft lures made from a 3D scan of a roach. It is intended for anglers looking for a ready-to-fish, effective lure for pike, zander, and other freshwater predators.DescriptionThis soft lure combines a natural profile, pronounced 3D details, and a lively kicking tail action that triggers strikes during steady retrieves, stop&go retrieves, and on the drop. The open-mouth design further enhances the realistic presentation, while the integrated J-hook allows for quick use straight out of the pack. It is an excellent choice for spinning in lakes, canals, and rivers.FeaturesRealistic 3D roach profileLength 10 cm and weight 18 gLively kicking tail action at different retrieve speedsOpen-mouth design for a more natural look in the waterIntegrated J-hook for quick and easy useSuitable for steady retrieves, stop&go, and jiggingPack of 3 luresTechnology3D details based on a scan of a natural fish for a convincing appearanceSpecificationsBrandSavage GearModel3D RoachLength10 cmWeight18 gTypeSoft lureActionLively kicking tail actionDesignOpen-mouthHookIntegrated J-hookQuantity in pack3 pcsAvailable VariantsRoachRuddFiretigerAdvantagesHighly realistic presentation that encourages predator strikesReady to fish with no additional rigging requiredVersatile use across multiple spinning techniquesThree attractive colours in one setExcellent balance of size, weight, and fish-catching performanceNoteProduct availability depends on stock status. For durability and safe use, it is recommended to use appropriate tackle and comply with local fishing regulations.

Short overviewSavage Gear 3D Roach 7,5 cm 9 g is a soft lure with a very realistic roach appearance and pronounced paddletail action. It is designed for predator fishing and performs excellently on the drop and during a steady retrieve. The practical pack of 3 pieces makes it an excellent choice for spinning fishing.DescriptionThe 3D Roach model was developed based on a realistic 3D representation of natural prey, giving the lure a convincing profile and attractive action in the water. Thanks to its active tail and ready-made rigging, the lure is ready for quick use when targeting pike, zander, and other predators. It performs particularly well in situations where a natural presentation through shallow and mid-depth water is required.FeaturesRealistic 3D roach profile for a convincing presentationActive paddletail with pronounced actionEffective on the drop and during the retrieveIntegrated J-hook with barbReady to fish without additional assemblyPack contains 3 luresSpecificationsBrandSavage GearModel3D RoachLength7,5 cmWeight9 gTypeSoft lure, paddletailHookIntegrated J-hook with barbActionPronounced, effective on the drop and retrievePack3 pcsAdvantagesVery natural appearance that triggers predator strikesVersatile use in different conditions and retrieve speedsSimple and quick to use on the waterCompact size suitable for targeted lure fishingProven Savage Gear build qualityNoteProduct availability may vary depending on stock levels. Before use, check the condition of the hook and lure, and handle carefully due to sharp parts.

Quick OverviewSavage Gear Release Rig M 40 cm is a ready-made trace for soft lures, designed for more effective pike fishing. The Release concept reduces the chance of the fish throwing the hook during the fight while also helping protect the lure from damage.DescriptionThis ready-made rig for shad lures uses the Line Thru system principle: after the strike and during the fight, the lure slides along the trace, making it harder for the predator to use the lure’s weight to free itself from the hook. This approach is especially useful in pike spinning, when reliable hook-ups, stable presentation, and lure durability are key to success on the water.FeaturesReady-made trace, ready to use with soft lures and shads.Reduces the chance of pike using the lure’s weight to throw the hook.Carbon49 wire provides flexibility and high resistance to predator teeth.Ultra-sharp SG treble hooks for reliable hook-ups.Strong forged split rings for added security during the fight.Screw-in bait holder and belly spikes allow stable and secure lure mounting.TechnologyCorkscrew Release RigLine Thru system principleSpecificationsBrandSavage GearModelRelease Rig MLength40 cmBreaking strain22 kgMaterialCarbon49 wireHook size#1/0Hook typeSG treble hook with barbHook colour1 red, 1 black (BLN)Rig typeRelease rig with screw-in bait holder and belly spikesIntended usePike, soft lures, shadsProduct weight0,1 kg (100 g)Pack quantity2 pcsEAN5706301574589AdvantagesBetter hook-up efficiency and fewer lost fish during the fight.Less lure damage thanks to the release rig principle.Ready to fish straight out of the pack.Reliable construction for serious pike spinning.NoteThe pack contains 2 ready-made rigs, without lures. Availability depends on stock status, and before use, check local regulations regarding barbed hooks.

Short overviewSavage Gear Release Rig S 30 cm 15 kg #2 is a ready-made trace for soft lures, developed for more effective pike fishing and targeting other predators. The release principle allows the lure to slide along the trace after a strike, reducing the chance of fish coming off and helping protect the lure from damage.DescriptionThis trace is specially adapted for fishing with soft lures such as shads, when it is important to achieve reliable hook-ups and keep the fish pinned during the fight. It works on the same principle as the Line Thru System: after the strike and hookset, the lure separates from the anchor point, so the pike is less able to use the weight of the lure to throw the hook. Thanks to the Carbon49 wire, forged split rings and ultra-sharp SG Y-treble hooks, you get a ready-to-use system for demanding predator fishing.FeaturesReady-made trace for soft lures and shadsRelease system reduces the chance of fish coming off during the fightThe lure slides along the trace and suffers less damage from predator teethCarbon49 wire provides high resistance and flexibilityUltra-sharp SG Y-treble hooks with barbs, size #2The pack includes 1 red and 1 BLN treble hookStrong forged split ringsIncludes corkscrew and belly spikes for quick riggingPack contains 2 piecesTechnologyCarbon49 wireOperating principle equivalent to the Line Thru SystemSpecificationsBrandSavage GearModelRelease Rig S 30cm 15kg #2Product typeTrace / release rig for soft luresLength30 cmBreaking strain15 kgSizeSHook size#2Hook typeSG Y-treble hooks with barbsMaterialCarbon49 wireTreble hook colour1 red, 1 BLN (black nickel)RingsForged split ringsAccessoriesCorkscrew and belly spikesQuantity per pack2 pcsApplicationPike fishing and other predator fishing with soft luresProduct code57457AdvantagesBetter hook-ups and more secure fish retention during the fightLess chance for pike to use the weight of the lure to shake out the hookExtends the lifespan of soft luresReady to use straight out of the packAn excellent choice for targeted pike lure fishingNoteThe pack contains 2 traces, while lures are not included. Product availability and warranty terms depend on the store's current offer.

Quick overviewPrologic Phyton Hollow Core Leader 7 m is an ultra-soft carp leader designed for a discreet and natural rig presentation. It sinks quickly, follows the contours of the bottom excellently, and is ideal for fishing wary carp in demanding spots.DescriptionThis hollow core leader is intended for carp fishing when the leader needs to lie as naturally as possible along the bottom and remain as inconspicuous as possible. Thanks to its hollow braided construction, it can be easily spliced like leadcore material, while also offering very good abrasion resistance for fishing over harder, uneven, or more demanding bottom terrain.FeaturesUltra-soft hollow core leader materialSinks quickly and hugs the bottom wellEasy joining using the splicing methodCan be spliced like leadcoreHigh abrasion resistanceSuitable for discreet presentation in carp fishingSpool length: 7 mTechnologyHollow body constructionLeadfree designSpecificationsBrandPrologicModelPhyton Hollow Core LeaderTypeCarp leader / hollow core leaderLength7 mMaterialHollow braided constructionKey featuresUltra soft, sinks quickly, easy joining, splices like leadcore, high abrasion resistanceTechnologyHollow body construction, leadfreeAvailable variants7m 35lbs35 lb / 15,9 kg / 15,8 kg7m 45lbs45 lb / 20,4 kgAdvantagesLies very naturally along the bottom and reduces the chance of spooking fishAn excellent choice for wary carp and technically demanding spotsFast sinking helps ensure stable rig presentationSplicing enables neat and reliable terminationsAbrasion resistance increases safety when fishing close to snagsNoteAvailability depends on the selected variant. Before fishing, check the condition of the leader and choose the breaking strain according to the conditions on the water.

Short OverviewThe Prologic LM Paste Cage is a practical paste holder for mounting on a hair rig, designed for reliable and neat bait presentation. It is ideal for anglers who want secure paste retention and effective presentation when casting at various distances.DescriptionThis accessory is designed to hold paste on a hair rig setup so that the bait remains stable during casting and fishing. It is especially useful in carp and feeder fishing when you want a more natural paste presentation and better bait control on the fed spot.FeaturesDesigned for holding paste and presentation on a hair rig setupSecurely holds paste even when fishing at longer distancesSimple and quick attachment to the hairSuitable for various types of fishing pastes and doughsCompact size for neat and effective bait presentationSpecificationsBrandPrologicModelLM Paste CageSizeMDimensions9 x 16 mmPackaging15 pcsTypePaste holder for hair rigPurposeCarp and feeder fishingProduct code49949BenefitsHelps keep the paste firmly on the rig during castingEnables a more natural and longer-lasting bait presentationReduces paste loss and makes rig preparation easierA practical solution for precise fishing on the target spotNoteBait is not included in the package. Product availability and packaging details may vary depending on the batch and stock status.

Quick OverviewThe Prologic LM Paste Cage S is a practical paste holder for hair rig setups, designed to securely hold fishing paste and provide stable bait presentation. It is ideal for anglers who want reliable paste retention during casting and fishing at various distances.DescriptionThis paste holder is designed for effective bait presentation on a hair rig system, especially when fishing with paste and other softer-consistency baits. The compact 6 x 11 mm design allows for a discreet approach, while the construction helps keep the paste firmly in place during casting and while in the water. It is suitable for carp and feeder fishing when neat, natural, and stable presentation is important.FeaturesDesigned for holding paste and presenting bait on a hair rig setupSecurely retains paste for fishing at shorter and longer distancesCompact size S for discreet presentationEasy to use and quick to attach to the rigSuitable for carp and feeder fishingPack contains 15 piecesSpecificationsBrandPrologicModelLM Paste CageSizeSDimensions6 x 11 mmPack15 pcsPurposePaste holder for hair rig setupProduct code49948BenefitsHelps keep paste firmly on the rigProvides a neater and more natural bait presentationSuitable for fishing at various distancesA simple solution for quick rig preparation on the bankNoteProduct availability depends on stock status. Before purchase, please check whether the dimensions match your rig and chosen type of paste.

Quick OverviewThe Prologic LM Maggot Clip 10 mm is a practical clip for fast and efficient presentation of maggots and other soft, natural baits. It is intended for anglers who want a tidier rig, quicker bait changes, and reliable presentation in carp, feeder, and match fishing.DescriptionThis Prologic accessory is designed for easy mounting of maggots, pinkies, and similar soft baits without complicating the rig. The LM Maggot Clip is especially useful when you want to save time on the bank while maintaining a natural, discreet bait presentation on a hair rig or D-rig setup. The 10 mm size offers a good balance between bait capacity and neat presentation.FeaturesEnables quick and easy mounting of maggots and other natural baitsSuitable for soft baits and effective presentation without complicated knots10 mm size for versatile use in different fishing situationsPack contains 20 piecesSuitable for hair rig and D-rig setupsAn excellent choice for carp, feeder, and match fishingSpecificationsBrandPrologicProduct NameLM Maggot ClipSize10 mmPack20 pcsPurposePresentation of maggots and other natural, soft baitsManufacturer Code49946EAN5706301499462Available VariantsSizeManufacturer CodePack6 mm4994420 pcs8 mm4994520 pcs10 mm4994620 pcs12 mm4994720 pcsBenefitsVery fast bait changes during fishingNeater and more effective presentation of natural baitsSaves time when tying and adjusting the rigVersatile use across multiple fishing techniquesPractical packaging for multiple trips to the bankNoteProduct availability and individual variants depend on stock levels. Before purchasing, check whether the selected size matches your rig and bait type.

Quick OverviewThe Prologic LM Quick Change Ring is a robust quick change ring designed for carp fishing and building reliable terminal rigs. It is an excellent choice for anglers using Chod and Helicopter rigs who want a neat, short, and secure hooklink connection.DescriptionThis terminal component was developed for fast replacement of rig parts without unnecessary complication on the bank. The welded ring ensures high strength and reliability, while the matt anti-glare coating helps provide a more discreet presentation in carp fishing. It is especially practical when setting up Chod and Helicopter rigs, where a tidy setup and a secure connection are extremely important.FeaturesIdeal for Chod and Helicopter rigs.Ultra-strong welded ring for reliable use.Matt, anti-glare coating for a more discreet presentation.Allows a tidier and shorter connection for your hooklink or rig.Suitable for quick changing of components in carp fishing.TechnologyWelded ring construction for extra security and resistance under load.Matt anti-glare finish to reduce reflection underwater.SpecificationsBrandPrologicModelLM Quick Change RingTypeQuick change ringPurposeChod and Helicopter rigsMaterial / constructionWelded ringSurface finishMatt, anti-glareAdvantage in useTidier and shorter rig connectionEAN5706301571434Product code57143AdvantagesFast and easy changing of rig parts on the bank.High reliability thanks to the welded ring.More discreet presentation due to the matt anti-glare finish.An excellent addition for modern carp systems.Helps create more compact and tidier terminal rigs.NoteProduct availability may vary depending on stock levels. For additional information on delivery and warranty, please check the details provided with your order in the store.

Quick OverviewThe Prologic LM Quick Change Swivel w/ Ring is a practical carp swivel for fast hooklink changes and reliable rig performance. The enlarged extra ring improves rotation, freedom of movement, and system mechanics, making it an excellent choice for carp fishing and helicopter rigs.DescriptionThis Prologic size 8 swivel is designed for anglers who want to adapt their rig quickly on the bank without unnecessary loss of time. The quick change construction allows easy hooklink replacement, while the additional enlarged ring helps the system work more naturally, improves rotation, and reduces the chance of tangling. It is particularly well suited for carp fishing and use in helicopter systems.FeaturesQuick change design for fast hooklink replacementSize 8 for wide use in carp rigsEnlarged extra ring for smoother movement and greater freedom of motionImproved rotation for more efficient system performanceFits perfectly with the Prologic buffer for helicopter rigPack contains 15 piecesTechnologyQuick Change system for fast and secure hooklink replacementEnlarged extra ring design for additional flexibility and improved rig mechanicsSpecificationsBrandPrologicLineLMModelQuick Change Swivel w/ RingTypeQuick change swivel with ringSize8Pack15 piecesCompatibilityPrologic helicopter rig bufferManufacturerSvendsen SportManufacturer code49932EAN5706301499325AdvantagesSaves time when changing hooklinks on the bankImproves movement and the natural presentation of the rigHelps provide more stable rotation and tidier system operationAn excellent choice for carp fishing and helicopter rigsPractical pack of 15 pieces for multiple fishing sessionsNoteThe product is supplied in a pack of 15 pieces. For optimal performance, use with compatible Prologic components and regularly check your tackle for wear.

Quick OverviewPrologic LM Silicon Quick Link Sleeves are silicone sleeves designed to cover quick links and swivels on fishing rigs. They help reduce tangles, protect the connection, and provide a neater, more secure rig presentation. They are an excellent choice for anglers who want a reliable and simple finishing touch for leaders and rigs.DescriptionThese Prologic sleeves are made from elastic silicone with a diameter of 3 mm and can be cut to the required length, depending on the rig type and connection size. They are simply slid over the quick link or swivel to achieve a cleaner anti-tangle effect and better knot protection. They are suitable for making and refining various rigs, especially in carp fishing and other techniques where rig neatness and a reliable connection are important.FeaturesSilicone sleeves for covering quick links and swivels3 mm diameter for universal use on various rigsCan be cut to the desired lengthReduce tangling during casting and rig operationProtect the connection and contribute to a neater leader presentationPack contains 20 piecesSpecificationsBrandPrologicModelLM Silicon Quick Link Sleeves 20pcsMaterialSiliconeDiameter3 mmPurposeCovering quick links and swivelsLengthAdjustable, cut as neededQuantity in pack20 pcsEAN / code49911AdvantagesQuick and easy installation without additional toolsHelp reduce the possibility of rig tanglesProtect the knot and connection from wearImprove the final appearance and functionality of rigsPractical pack for multiple rigsNoteQuick links and swivels are not included in the pack. Please check product availability and delivery time when placing your order.