Designed to cause the absolute minimum damage to delicate hook baits when hair rigging. This is possible thanks to the fine, stainless steel needle, which has a recessed barb and tapered point. The flared handle allows you to exert enough pressure to penetrate harder baits without slipping. Hooked design suits fine braids and mono hairs. Perfect for Boilies, Tiger nuts and Fake Food. Easy-to-identify Blue handle. Ref: KBNBF

Pulla The Pulla has been specially designed so that the angler can easily pull knots tight on hook links and check that they are strong enough. The 2mm stainless steel hook fits perfectly through a Korda Size-8 Swivel or a Link Loop. This handy little tool makes tying rigs much easier, as holding the swivel and tightening up can be a fiddly job.

Small spike  Accurately pierce  Designed to reduce splitting the bait  Black and green ergonomic handle  Sizes available: 1mm, 4mm, 6mm and 8mm

Cord Crimping Tool Small

Accessory: Grinding plate for hooks

Large bore bait drill Designed for boring out larger baits like tigernut or pellets Apply foam or cork to critically balance, pop up or fine tune your presentation

Very affordable set consisting of boilie driller and needle, splicing needle and stringer needle.

Available in 5 colors Supplied with 4 needles This 5-in-1 baiting tool is the only baiting tool you will ever need. Supplied with four needles, a boilie needle, a fine, maggot needle, a PVA stick/stringer needle and a fine, nut drill, each can be easily and securely attached to the easy-grip handle in a matter of seconds, giving you the perfect baiting tool for any situation. The back of the handle features a boilie-stop dispenser, so they are always at hand when needed, which can be easily refilled with boilie stops as needed. The four needles are supplied in a soft, rubber holder to keep them together in your and the handle is available in four, hi-viz colors and one glow-in-the-dark option, so that you never lose it.

The ESP Nut Drill and matching diameter Cork Sticks are designed for drilling out tiger nuts and boilies to create a buoyant or wafter hookbait. The drills are made to our own specification using high-grade stainless steel. The drills have a sharp pilot point and leading edge, so clean holes can be drilled without the risk of splitting or damage, even in relatively soft or fragile baits. The ergonomic high-vis molded handles fit nicely in the hand, allowing smooth rotation, but will not roll when placed on a flat surface, such as a tackle box lid. The 4mm drill is perfect for balancing small baits such as mini tiger nuts and 10 or 12mm boilies, the 6mm is best for larger tiger nuts and 14 - 16mm boilies whilst the 8mm is designed for adding a degree of buoyancy to larger boilies. By altering the length of cork stick used, different levels of buoyancy can be achieved from just counterbalanced, slow sinking to extra buoyant perfect pop-ups, especially important for chod rigs. Features: - High-grade stainless steel drill - Sharp pilot point and leading edge - Ergonomic high-vis molded handles - 4mm, 6mm, and 8mm - Nut drill comes with matching cork sticks

The ultimate 3 in 1 rig tool Featuring a loop for hooks, a hook for swivels & rings and a stepped stainless point which is perfect for both pulling loops in stiff materials and creating loops when splicing in leadcore

Designed for use with a cordless drill for easy removal of old nylon. The D-Spool is also equipped with a safety switch in case the nylon gets tangled during removal. When all excess nylon is removed, simply unscrew the cap and remove the nylon.

An excellent dedicated tool intended for drilling boilies or large particles such as tiger nuts, so that we can insert Buoyant foam or cork sticks into the resulting hole and turn sinking baits into floating ones. The non-slip handle makes it easy to use.

The Edges Crimping Pliers are specially designed to work with Edges crimps that form an extended crimp that allows for optimal position of the loop in the crimp. The pliers taper towards the tip to form the perfect extension for any size crimp while at the same time ensuring a firm hold. Pliers have cutters and a firm grip making them useful for many aspects of pre-tie making.

Description Use cork sticks to create critically balanced and pop-up baits. Our replacement cork sticks are designed to perfectly fit the holes created while using the RidgeMonkey Combi Bait Drill. Available in both 6mm and 8mm diameter, each supplied in packs of 10.