Novosti

Short OverviewThe Savage Gear XLNT3 8'3'' (251 cm) is a lure fishing rod designed for anglers looking for a powerful, reliable, and well-balanced tool for working heavier lures. Thanks to the Toray Carbon blank, 2-piece construction, and maximum casting weight of up to 150 g, it is an excellent choice for powerful casts and secure control during the fight.DescriptionThe XLNT3 model was developed for lure fishing in situations where longer casts, good power reserve, and stable rod performance are required. It is suitable for fishing with heavier lures, both from the shore and from a boat, while the quality components and modern construction ensure sensitivity, durability, and comfortable use on the water.FeaturesLength: 251 cm (8'3'')Rod weight: 199 gMaximum casting weight: 150 g2-piece construction for easier transport and storageTransport length: 128 cmToray Carbon blank for an excellent balance of power and sensitivitySin Coil Control guides for better line controlAlien Lock Down R/S reel seatTPE handle with no material memory for a comfortable and secure gripReady to Fish concept for quick readiness on the waterPurpose: casting/spin lure fishingTechnologyToray Carbon constructionSpecificationsBrandSavage GearModelXLNT3Rod typeCasting/SpinLength251 cm (8'3'')Casting weightmax. 150 gWeight199 gAlternatively stated weight215 gMaterialToray CarbonNumber of sections2Transport length128 cmGuidesSin Coil Control GuidesReel seatAlien Lock Down R/SHandleTPE, no material memoryEAN5706301623683AdvantagesAn excellent choice for heavier lures and stronger presentationsThe carbon construction provides good sensitivity with the necessary power reserveThe 2-piece design makes transport easier without a major compromise in performanceQuality components contribute to reliability and durabilitySuitable for anglers who want long and precise castsNoteProduct availability depends on stock status. For information on warranty and delivery time, check the store details before ordering.

Short OverviewDaiwa 17 Ballistic LT is a lightweight and powerful reel intended for anglers seeking reliable performance, smooth rotation, and durability in both freshwater and saltwater. It is an excellent choice for spinning, feeder, and general-purpose fishing where low weight and strength are equally important.DescriptionThis model was developed according to the Daiwa LT (Light & Tough) concept, delivering an optimal balance of low weight and high mechanical resistance. The rigid Zaion body helps maintain gear stability under load, while MagSealed shaft protection contributes to better resistance against water, salt, and impurities. Thanks to the ATD drag and Tough Digigear transmission, the Ballistic LT provides dependable performance when fighting fish and is suitable for active lure fishing and other modern fishing techniques.FeaturesLT (Light & Tough) construction for low weight and high strengthZaion body resistant to twisting and loadMagSealed shaft protection for greater resistance in demanding conditions6 ball bearings, including 1 CRBB bearingAIR ROTOR for better balance and easier operationAIR BAIL for secure line controlCNC Tough Digigear transmission for power and durabilityATD drag with smooth and progressive releaseInfinite Anti-Reverse anti-reverse systemCross Wrap line lay and Silent Oscillation for quiet operationAluminum Air spoolCNC aluminum handle screwed directly into the drive gearTwist Buster II line roller for reduced line twistSuitable for freshwater and saltwaterTechnologyLT (Light & Tough)MagSealedZaion BodyAIR ROTORAIR BAILTough DigigearATD DragInfinite Anti-ReverseCross WrapSilent OscillationTwist Buster IISpecificationsModelDaiwa 17 Ballistic LTProduct TypeReelConceptLT (Light & Tough)BodyZaion compositeProtectionMagSealed shaft protectionBearings6 ball bearings (including 1 CRBB)RotorAIR ROTORBailAIR BAILGearCNC Tough DigigearDragATDSpoolAluminum Air spoolHandleCNC aluminum, screwed directly into the drive gearAnti-reverseInfinite Anti-ReverseLine LayCross Wrap, Silent OscillationLine RollerTwist Buster IIIntended UseSpinning, feeder, general-purpose fishing; freshwater and saltwaterMaximum DragUp to 12 kg, depending on sizeAvailable Variants1000D-XH2000D25002500D-XH3000D-CXH4000D-CXH4000C4000D-C5000D-CXHAdvantagesVery good combination of low weight and high powerReliable mechanism protection for longer service lifeSmooth drag helps during safer fish fightingStable and precise gearing for modern active fishingWide size range for different techniques and fishing conditionsNoteThe D, C, and XH markings differ depending on the model variant. Before purchase, check the desired size and gear ratio of the variant that suits you best.

Short overviewThe Daiwa Regal LT 1000D is a lightweight and reliable spinning reel designed for finesse spinning and ultralight fishing. Thanks to the LT concept, DS5 body, and smooth operation with 9 bearings, it is an excellent choice for anglers seeking sensitivity, precision, and long-lasting durability.DescriptionThe Regal LT 1000D model was developed according to Daiwa’s LT (Light & Tough) philosophy, which combines low weight and high strength. The reel’s compact size is ideal for trout, perch, and other smaller predators, as well as for all situations where fine lure control, balanced operation, and reliable line lay are important.FeaturesLT (Light & Tough) concept for lower weight and greater efficiencyDS5 composite body for a good balance of strength and low weight9 ball bearings for smooth and quiet rotationAIR ROTOR for better balance and reduced start-up inertiaTOUGH DIGIGEAR drive for precise and long-lasting power transmissionAluminium spool for reliable performance and neat line layCNC-machined aluminium handle for a firm grip and stabilityTechnologyLT (Light & Tough)AIR ROTORTOUGH DIGIGEARSpecificationsModelRegal LT 1000DBrandDaiwaTypeSpinning reelConceptLT (Light & Tough)BodyDS5Bearings9BBRotorAIR ROTORDriveTOUGH DIGIGEARSpoolAluminiumHandleCNC-machined aluminiumProduct code10116-105AdvantagesA very good choice for ultralight and light spinningLow weight helps reduce fatigue throughout a full day of fishingSmooth operation and precise transmission improve lure controlHigh-quality Daiwa systems increase durability and reliabilityThe compact size pairs perfectly with sensitive spinning rodsNoteProduct availability and delivery time depend on stock status. Photos and equipment details may vary slightly depending on the manufacturer’s production batch.

Quick OverviewDaiwa Regal LT 2000D is a lightweight and reliable spinning reel designed for anglers looking for smooth operation, precise line lay, and low weight. It is an excellent choice for light spinning, a finesse approach, and situations where sensitivity and control are especially important.DescriptionThe Regal LT 2000D model was developed according to the Daiwa LT concept, which combines low weight with the necessary strength for everyday fishing. This reel performs well in freshwater spinning, targeting small and medium-sized predators, and finer lure presentations, while its deep spool and balanced construction provide stable and comfortable performance throughout the entire day on the water.FeaturesLT (Light & Tough) construction for an excellent balance of weight and strengthDS5 reel body for rigidity and drive system stabilityZAION V super composite for low weight and durabilityDeep spool for greater versatility when choosing lineAluminium Air spool for reliable line layInfinite Anti-Reverse for secure and instant stopping of back playSilent Oscillation system for smoother and more precise operationAluminium handle for a firm grip and better controlScrewless rotor design for a cleaner and lighter constructionExcellent reel balance for reduced vibration during operationTechnologyAirdrive RotorAirDrive BailAirDrive DesignTOUGH DIGIGEARSpecificationsBrandDaiwaModelRegal LT 2000DProduct typeSpinning reelSize2000DConceptLT (Light & Tough)MaterialZAION V super compositeBodyDS5Bearings9 ball bearingsRotorAIR ROTOR / Airdrive RotorGearTOUGH DIGIGEARSpoolAluminium Air spool, deepHandleAluminiumAnti-reverseInfinite Anti-ReverseOscillationSilent Oscillation SystemRotor designScrewless rotor designWeight184 gProduct code10116-205AdvantagesVery low weight reduces fatigue during all-day spinning sessionsSmooth and quiet operation increases comfort and precision in lure presentationStrong and modern construction provides long-lasting reliabilityThe deep aluminium spool adds extra practicality when choosing lineAdvanced Daiwa technologies contribute to better balance and easier rotationNoteProduct availability may vary depending on stock levels. Warranty and purchase conditions apply according to store policy.

Short overviewThe Daiwa Regal LT 2500D is a lightweight and reliable spinning reel designed for anglers looking for smooth operation, low weight, and proven Daiwa quality. It is an excellent choice for everyday spinning fishing with monofilament or braided line, in freshwater and similar fishing conditions.DescriptionThe Regal LT 2500D model was developed according to Daiwa’s LT (Light & Tough) philosophy, combining reduced weight with sufficient strength for modern active fishing. Thanks to its lightweight body, deep spool, and advanced rotor and bail technologies, this reel delivers balanced operation, good line management, and reliable power transfer during casting and fighting fish.It is suitable for various spinning techniques, especially when a combination of sensitivity, comfort, and stability in use is important. The deep spool provides good line capacity, while the reel construction contributes to smooth and quiet performance on the water.FeaturesLightweight LT concept for a better weight-to-power ratioZaion V super composite for reduced weight and good strengthDS5 reel bodyDeep spool for greater line capacityInfinite anti-reverse for secure and instant backstopSilent Oscillation system for smoother and more refined operationAluminium handle for a stable grip and durabilityTechnologyLT (Light & Tough)Airdrive RotorAir RotorAirDrive BailSpecificationsModelRegal LT 2500DBrandDaiwaMaterialZaion V super compositeBodyDS5Weight201 gSpoolDeep spoolSystemInfinite anti-reverseOscillationSilent OscillationHandleAluminiumTechnologiesLT, Airdrive Rotor, Air Rotor, AirDrive BailAdvantagesLow weight of 201 g for more comfortable all-day fishingSmooth and balanced operation thanks to Daiwa rotor technologiesGood line capacity due to the deep spoolA reliable choice for spinning fishing with monofilament and braided lineQuality construction that offers durability and stabilityNoteProduct availability depends on stock levels. Please check warranty and exact delivery information before purchase.

Quick OverviewThe Daiwa Regal LT 3000D-C is a lightweight and reliable spinning reel designed for anglers looking for an excellent balance of weight, power, and smooth operation. Thanks to the LT concept, quality gearing, and precise construction, it is an excellent choice for versatile freshwater spinning.DescriptionThis reel from the Regal LT series was developed for anglers who want a modern and responsive reel for everyday use. The compact body, low weight, and stable rotor provide comfortable operation throughout the day, while the powerful drive system ensures reliability when working lures and playing fish. The 3000D-C model is especially suitable for various spinning techniques, including fishing with soft lures, вобblers, and metal lures.FeaturesLightweight construction for less fatigue during fishing9 ball bearings + 1 roller bearing for smooth and stable operation5.2:1 gear ratio for versatile spinning applicationsAir Rotor system for better balance and lower rotational inertiaPrecision-machined aluminum handleOversized ergonomic handle knob for a more secure and comfortable gripAluminum spool for reliable casting and good line managementTechnologyLT Concept (Light and Tough) – reduced weight while maintaining strength and durabilityTrue Carbon Frame – strong and lightweight body constructionAir Rotor System – lower rotational mass and better operating sensitivitySpecificationsModelRegal LT 3000D-CBrandDaiwaSize3000Weight221 g (7,8 oz)Bearings9 ball + 1 rollerGear Ratio5.2:1BodyTrue Carbon FrameRotorAir Rotor SystemLine Capacity10/280, 12/220HandleMachined aluminumKnobOversized ergonomic knobSpoolAluminumProduct Code10116-305AdvantagesExcellent balance between low weight and the necessary powerVery smooth operation when working a lure and under loadCompact and versatile spinning reel for a wide range of applicationsQuality materials and modern Daiwa technologiesComfortable grip and secure control during fishingNoteThe product is available as a single version without additional variants. Manufacturer specifications may change without prior notice, and the photos are for informational purposes only.

Quick OverviewThe Daiwa 18 Ninja LT is a modern fishing reel designed for anglers looking for low weight, reliable operation, and an excellent price-to-performance ratio. It is an excellent choice for spinning, feeder, and other freshwater techniques, both for beginners and more experienced anglers.DescriptionThe Ninja LT series continues Daiwa’s recognizable tradition and brings the LT (Light & Tough) concept, which reduces the reel’s weight while maintaining the necessary strength and stability. Thanks to the Tough Digigear drive, ATD drag, and high-quality line lay, this reel delivers smooth operation, secure control during the fight, and very good usability in various situations on the water.It is suitable for lure fishing, finesse approaches, light to medium-heavy spinning, and feeder fishing, depending on the selected size. The compact body, reliable anti-reverse, and high-quality machined aluminum handle further contribute to a feeling of precision with every turn.FeaturesLT (Light & Tough) concept for lower weight and good strength4 ball bearings for smooth and reliable operationTough Digigear drive for efficient power transmissionATD drag for consistent and controlled resistance when fighting fishAir Rotor for lower weight and better balanceCross Wrap system for neat line laySilent Oscillation for smoother windingABS spool for precise and longer castsMachined aluminum handleAirBail line rollerSoft-touch handle knob for a more comfortable gripNew-generation line clipGraphite Body housing and Graphite RotorTechnologyLT (Light & Tough)Tough DigigearATD DragAir RotorAirBailCross WrapSilent OscillationInfinite Anti-ReverseTwist Buster IISpecificationsBrandDaiwaModel18 Ninja LTProduct typeFishing reelConceptLT (Light & Tough)Bearings4 ball bearingsDriveTough DigigearDragATDBodyGraphiteRotorGraphite Air RotorSpoolABS spoolHandleMachined aluminum handleLine rollerAirBailLine layCross WrapOscillationSilent OscillationAnti-reverseInfinite Anti-ReverseLine rollerTwist Buster IIHandle knobSoft touchLine clipNew-generation line clipAvailable Variants1000200025002500D2500-XH3000-C3000D-C3000-CXH4000-C5000-C6000AdvantagesVery good ratio of price, weight, and performanceVersatile use in spinning and feeder fishingSmooth operation and reliable power transmission during the fightATD drag helps protect thinner lines and leadersNeat line lay contributes to more precise and longer castsWide size range for different techniques and fish speciesNoteAvailability of individual variants may vary depending on stock levels. For exact technical data by size, it is recommended to check the label or the manufacturer’s data before purchase.

Quick OverviewThe Daiwa BG is a robust spinning reel designed for anglers who seek power, durability, and reliable performance in both freshwater and saltwater. Thanks to its aluminum body, precision gearing, and smooth ATD drag, it is an excellent choice for spinning, shore fishing, jigging, and catfish fishing in the larger sizes.DescriptionThe Daiwa BG is known for its solid construction and stable performance under load. The HardBodyz aluminum body provides the drive system with the necessary rigidity, while Digigear II ensures efficient power transmission and smooth operation. The reel is designed for use with monofilament and braided lines, and the ABS II aluminum spool with good line lay helps with precise casting and safer control during the fight. Smaller sizes are excellent for spinning, while larger variants are suited to more demanding saltwater fishing and heavier techniques.FeaturesSolid aluminum body for greater stability and durabilityGraphite Air Rotor for reduced rotor weight and better balance6+1 bearings for smooth and reliable operationATD drag with carbon washers for consistent line releaseABS II aluminum spool for better line controlTwistbuster line roller to reduce line twistInfinite Anti-Reverse for instant backplay stopMachined handle for a firm and secure gripAutomatic bail on sizes 2500 and 3000Manual bail on larger models for greater reliability in demanding fishingTechnologyDigigear IIATDABS IITwistbusterSpecificationsProduct typeSpinning reelBodyAluminumRotorGraphite Air RotorDriveDigigear IIDragATD with carbon washersBearings6+1SpoolAluminum, ABS IIHandleMachinedAnti-reverseInfinite Anti ReverseLine rollerTwistbusterBailAutomatic on 2500/3000, manual on 4500-8000PurposeFreshwater and saltwater, spinning, shore fishing, jigging, catfish fishingAvailable Variants1500Compact size for light spinning and a finesse approach.2000A practical choice for lighter spinning and versatile use.2500Gear ratio 5.6:1, weight approximately 265 g, bearings 6+1, capacity 200 m / 8 lb (3,63 kg)3000Gear ratio 5.6:1, weight approximately 305 g, bearings 6+1, capacity 200 m / 12 lb (5,44 kg)3500Versatile size for stronger spinning and general saltwater fishing.4000Gear ratio 5.7:1, weight 405 g, bearings 6+1, capacity 270 m / 12 lb (5,44 kg)4500Greater power for heavier spinning, saltwater, and more demanding fishing.5000Gear ratio 5.7:1, weight 640 g, bearings 6+1, capacity 430 m / 14 lb (6,35 kg)6500Gear ratio 5.3:1, weight 836 g, bearings 6+1, capacity 340 m / 20 lb (9,07 kg)8000Gear ratio 5.3:1, weight 836 g, bearings 6+1, capacity 500 m / 20 lb (9,07 kg)AdvantagesVery solid construction for long-lasting performance in tough conditionsExcellent balance of power, smooth operation, and durabilityReliable drag for controlling large fishSuitable for a wide range of techniques and fishing situationsWide choice of sizes for different angler needsNoteAvailability of individual sizes depends on stock status. After use in the sea, rinsing with fresh water is recommended to extend the reel’s service life.

Short OverviewThe Daiwa 18 Ninja Match & Feeder LT 4000-C is a lightweight and powerful reel designed for feeder and match fishing. Thanks to its LT construction, Tough Digigear drive, and ATD drag, it delivers smooth operation, reliable control, and excellent performance on long casts. It is an excellent choice for anglers looking for a dependable reel for precise fishing on both stillwaters and running waters.DescriptionThe 18 Ninja Match & Feeder LT 4000-C model was developed for anglers who value lightweight construction, stable power transmission, and neat line lay. The compact body combined with a larger spool makes long and accurate casting easier, which is especially important in feeder techniques and match fishing. The reel is suitable for use with feeders, precise targeting of the fishing distance, and a secure fight with fish thanks to the consistent drag performance.FeaturesLT (Light & Tough) construction for lower weight and high strengthTough Digigear drive for powerful and long-lasting transmissionATD drag for smooth and progressive line releaseAirBail bail arm for reliable operation and proper line guidanceABS spool for better line release and easier long-distance castingMachined aluminum handle for stability and precisionSoft touch knob for a more comfortable grip while fishingNew generation line clip for precise distance markingGraphite body and graphite rotor for a good balance of weight and durabilityTechnologyLT Light & ToughATD dragTough DigigearAirBailABS spoolSpecificationsBrandDaiwaModel18 Ninja Match & Feeder LT 4000-CPurposeFeeder and match fishingConceptLT (Light & Tough)DriveTough DigigearDragATD front dragBodyGraphite bodyRotorGraphite rotorSpoolABS spoolHandleMachined aluminum handleKnobSoft touchLine clipNew generation line clipWeight280 gCode10217-400AdvantagesLightweight construction reduces fatigue during all-day fishingAn excellent choice for feeder and match techniques that require precision and distanceThe smooth ATD drag helps make playing fish saferThe robust gearing ensures reliable operation even under loadThe line clip makes it easier to repeat the exact casting distanceNoteProduct availability and delivery time depend on stock status. Please check all technical data and warranty conditions before purchase.

Quick OverviewThe Matrix Accessory Chair is a lightweight and stable fishing chair designed for feeder and float fishing. The low backrest makes casting and movement easier during fishing, while the folding construction and carry strap allow for easy transport.DescriptionThis chair was developed for anglers looking for a reliable and practical seat for frequent changes of position on the bank. The combination of aluminium and steel construction provides a good balance of strength and low weight, while the 25 mm aluminium legs allow the attachment of all compatible 3D accessories, making it an excellent choice for an organised feeder and match approach.FeaturesDesigned for feeder and float fishingLow backrest for easier casting and better mobilityLightweight aluminium-steel construction25 mm aluminium legs compatible with all 3D accessoriesFolds flat for easier transport and storageSupplied with a carry strapDurable polyester outer fabric and polyurethane paddingSpecificationsModelMatrix Accessory ChairPurposeFeeder and float fishingConstructionLightweight aluminium / steel constructionLegsAluminium, 25 mm diameterCompatibilityCompatible with all 3D accessoriesFolded chair dimensions72 x 22 x 82 cmWeight4,9 kgOuter fabric100% polyesterPadding100% polyurethaneAdvantagesAn excellent choice for anglers who want mobility and stability at the fishing spotMakes active-style fishing easier thanks to the low backrestFolds quickly and takes up less space during transportAllows workstation upgrades with 3D accessoriesPractical for shorter and longer fishing sessionsNote3D accessories shown in the photos, if any, are most often sold separately. Please check availability before ordering, and contact our customer support for warranty details.

Short overviewThe Matrix Pro 4 Rod Stiff Holdall 1,95 m is a rigid rod holdall designed for the safe transport of up to 4 assembled rods with reels. It is an excellent choice for competition anglers and demanding fishermen looking for maximum protection, neat organisation, and quick access to their gear on the bank.DescriptionThis Matrix holdall was developed for feeder and match fishing, where reliable transport of ready-made setups is extremely important. The ultra-rigid outer construction with a PE board helps protect rods from impacts and bending, while the internal compartment, Velcro straps, and distance stick pocket allow for tidy storage of equipment. The integrated S.M.S system further makes precise marking and repeating of fishing distance easier.FeaturesHolds up to 4 assembled rodsUltra-rigid outer protective shell with PE boardPadded fixed internal divider for better protection of equipmentInternal Velcro straps for securely fastening rodsFull-length zip for easy accessAdjustable padded shoulder strap for comfortable carryingCarry handleInternal pocket for distance sticksIncludes 2 distance sticksTechnologyS.M.S (Smart Mark System) for quick and precise distance markingSpecificationsBrandMatrixModelPro 4 Rod Stiff HoldallProduct codeGLU084Length1,95 mDimensions195 x 17 x 20 cmCapacity4 assembled rodsOuter material800D polyester with PVC coating (100% polyester)Lining100% polyesterBase100% PVCOuter protectionUltra-rigid protective shell with PE boardInternal organisationPadded fixed divider, Velcro straps, internal pocketClosureFull-length zipCarryingAdjustable padded shoulder strap and handleIncluded2 distance sticksMarking systemS.M.S (Smart Mark System)AdvantagesVery good protection for rods and reels during transportIdeal solution for feeder and match anglers carrying ready-made setupsFaster gear organisation thanks to internal dividers and strapsPrecise distance measuring and repeatability with the included sticks and S.M.S systemDurable materials suited to frequent use in the fieldNoteThe product is supplied as a single 1,95 m length variant. Rods and reels shown in promotional materials are not included, and availability should be checked before ordering.

Short OverviewThe Rive ST8 Giroseat Feeder HSP D36 is a premium feeder platform designed for anglers seeking maximum stability, comfort, and functionality on the bank. Its aluminium frame, rotating seat with folding backrest, and HSP footplate make it an excellent choice for longer and more demanding fishing sessions.DescriptionThis professional Rive platform was developed for feeder fishing, but it will also satisfy competitors and anglers who want to adjust their position precisely and quickly on uneven ground. The aluminium construction provides an excellent strength-to-weight ratio, while the D36 legs ensure high stability and compatibility with numerous accessories. The Giroseat Feeder seat further enhances comfort during long hours of fishing, while practical trays and accessories allow better organisation of tackle right next to the platform.FeaturesFull high-strength aluminium frameRotating seat with folding backrestSeamless seat cushion with fixed top kit/pole heel support4 telescopic legs 420–720 mm, diameter 36 mm2 fixed legs length 420 mm, diameter 36 mmSide tray dimensions 420 x 380 mm30 mm side drawer under the seat30 mm fixed drawer on the frame30 mm removable drawer with lidFootplate protection for greater durability during transport and useRive carry strapFoam rod restDeluxe pole supportTrolley unit for easier transportTechnologyHSP system with two quarter-turn locks and 4 platform positions for quick and secure adjustmentSpecificationsBrandRiveModelST8 Giroseat Feeder HSP D36FrameFull aluminium frameSeatRotating seat with folding backrestSeat CushionSeamless, with fixed pole heel supportLegs4 telescopic 420–720 mm + 2 fixed 420 mmLeg Diameter36 mm (D36)Side Tray420 x 380 mmDrawers30 mm side drawer under the seat, 30 mm fixed drawer on the frame, 30 mm removable drawer with lidFootplateHSP system with 4 platform positionsAdditional EquipmentRive carry strap, foam rod rest, Deluxe pole support, trolley unitCode140113Available VariantsFull Black – aluminium frame, DREAM cushionAqua/Black – aluminium frame and legs in black finish, DREAM cushionAdvantagesVery stable platform for feeder fishing on various terrainsComfortable seat for long fishing sessionsQuick position adjustment thanks to the HSP systemLarge number of practical trays and accessories for better tackle organisationCompatibility with D36 accessories and professional equipmentHigh-quality aluminium construction for a long service lifeNoteAvailability of variants and equipment may vary depending on current stock levels. The product comes with the manufacturer's factory warranty according to the terms of the Rive brand.

Quick overviewThe Matrix PRO Ethos Jumbo Roller & Accessory Bag is a large bag for the secure transport of rollers, roosts, rod rests, and larger seat box accessories. It is designed for anglers who need tidy storage, good equipment protection, and practical carrying for competitions and everyday fishing trips.DescriptionThis Matrix bag was developed for anglers who use multiple accessories with a seat box, especially in match fishing and feeder fishing. Thanks to its large capacity, sturdy construction, and slim foldable design, it provides an organised layout of equipment and easier transport of longer and bulkier accessories such as XL rollers, feeder arms, accessory bars, and long seat box legs.FeaturesLarge capacity for big pole rollers, roosts, rod rests, and seat box accessories.Hard protective base for better resistance to wear and moisture.Refined slim foldable design that opens into two equal storage compartments.Each compartment can hold two XL pole rollers.Suitable for feeder arms, accessory bars, and long seat box legs.Padded interior for extra protection of sensitive equipment.Carry handle and adjustable shoulder strap for easier transport.SpecificationsBrandMatrixModelPRO Ethos Jumbo Roller & Accessory BagCodeGLU091Dimensions95 × 30 × 43 cmMaterial800D polyester with PVC coatingOuter fabric100% polyesterLining55% polyester / 45% PVCPadding95% polyethylene / 5% polyurethaneBase100% PVCConstructionTwo equal storage compartmentsCapacityTwo XL pole rollers in each compartmentPurposeRollers, roosts, rod rests, feeder arms, accessory bars, long seat box legsBenefitsExcellent gear organisation thanks to two separate compartments.Increased content protection with a hard base and padded interior.Practical for competition and recreational fishing when carrying multiple bulky accessories.Durable materials make long-term use and maintenance easier.NoteAccessories shown in the photos are not included with the product. Availability may vary, and for additional information on delivery and warranty, please check the store details.

Short OverviewThe SENSAS Nanoflex 3900 Seatbox 36 is a competition fishing seatbox designed for anglers seeking maximum stability, comfort, and excellent tackle organization by the water. Thanks to its 36 mm legs, sliding footplate, and modular compartments, it is an ideal choice for match and feeder fishing on prepared and more demanding pegs.DescriptionThis seatbox was developed for a serious approach to fishing, where quick setup, precise leveling, and easy access to tackle are key to success. The SENSAS Nanoflex 3900 Seatbox 36 features a robust construction, extendable footplate, integrated keepnet support in the footplate, and practical drawers and compartments that help keep your tackle neatly organized throughout the entire fishing session.Features2-in-1 seat cushion system for greater comfortExtendable sliding footplateIntegrated keepnet support in the footplate4 telescopic legs with a diameter of 36 mm2 standard legs with a diameter of 36 mm1 compartment, height 80 mm1 bottom compartment, height 40 mmLid with 3 built-in spirit levelsCushion with two half-sliding drawersTransport strapPrepared for rear wheel installationPegs for setup on hard groundSpecificationsBrandSENSASModelNanoflex 3900 Seatbox 36TypeCompetition fishing seatboxLeg diameter36 mmTelescopic legs4Standard legs2Compartment1 x 80 mmBottom compartment1 x 40 mmDrawers2 half-sliding drawersFootplateExtendable sliding footplateKeepnet supportIntegrated in the footplateSpirit levels3Transport strapYesRear wheel installationYesPegs for hard groundYesColorsBlack, Blanc, VertEAN3297830255718Available Variants25571-NANOFLEX 3900 SEATBOX 3625621-NANOFLEX 3900 SEATBOX 36 VERT28537-NANOFLEX 3900 SEATBOX 36 BLANCAdvantagesExcellent stability on different fishing pegsQuick and clear tackle organization during fishingComfort for long competition and recreational sessionsCompatibility with accessories for the 36 mm systemEasier transport thanks to the strap and rear wheel preparationNoteAvailability of individual variants may change depending on stock status. Warranty and package contents depend on the manufacturer and delivery batch.

Short OverviewThe Matrix Aquos Bait Cool Bag is a spacious insulated bait bag designed for anglers who want freshness, neat organization, and safe bait transport on the bank. It is an excellent choice for feeder, match, and other techniques where it is important for baits and additives to stay protected and easily accessible.DescriptionThis fishing bag is designed for practical bait storage during shorter and longer fishing trips. The foil-lined main compartment helps keep the contents cooler and fresher, while the large front pocket allows separate storage of additives and hookbaits. Thanks to its robust 600D construction, oversized zippers, and padded shoulder strap, the Matrix Aquos Bait Cool Bag provides reliability and comfort when transporting gear at the fishing spot.FeaturesMain compartment holds up to 6 bait tubs with a capacity of 3,3 ptFoil-lined interior helps keep contents coolerLarge front pocket for additives and hookbaitsDurable oversized zippers on all compartmentsAdjustable padded carry strapSturdy handles for easier transportRobust 600D material construction for long-lasting useSpecificationsProduct nameMatrix Aquos Bait Cool BagDimensions48 x 32 x 30 cmCapacityUp to 6 bait tubs of 3,3 ptMain compartmentFoil-lined insulated compartmentFront pocketLarge pocket for additives and hookbaitsOuter material100% polyester / 100% PVCConstruction600D fabricPadding95% polyester, 5% polyurethaneZippersLarge, durable zippersEAN5056212185917BenefitsHelps keep baits fresh during fishingProvides tidy organization of bait tubs, additives, and hookbaitsDurable construction suitable for frequent useEasier transport thanks to the strap and handlesA practical choice for feeder and match anglersNoteProduct availability depends on stock levels. Bait tubs are not included, and the manufacturer’s warranty applies according to Matrix brand terms.

Quick OverviewThe Matrix Mini Bait Bag GLU110 is a compact bait bag designed for neat storage of hookbaits such as hard pellets and boilies. Its waterproof construction, 6 included pots and transparent PVC lid make it an excellent choice for feeder, match and other fishing techniques where bait organisation is important.DescriptionThis bag is designed for anglers who want to keep baits safe and neatly organised on the bank. The rigid padded and waterproof construction protects the contents, while the screw lids on the pots allow the addition of flavours, additives and glugs without leaking. Removable dividers further improve organisation, and the easy-wipe surface simplifies maintenance after fishing.FeaturesCompact bag for storing hookbaits such as pellets and boiliesIncludes 6 plastic pots in two sizes: large and smallScrew lids reduce the chance of leaks from liquid additives and flavoursRigid padded, waterproof constructionTransparent smoke grey PVC lid for quick content checksRemovable internal dividers for flexible organisationEasy to clean and maintain, surface can be simply wiped downSpecificationsBrandMatrixProduct NameMini Bait Bag (Inc. 6 Pots)CodeGLU110Product TypeBait bag with potsDimensions17 x 17 x 9 cmNumber of Pots6Pot SizesLarge and smallMaterialRigid padded, waterproof fabricLidTransparent smoke grey PVCInternal DividersRemovableMaintenanceEasy cleaning, wipe-clean surfaceBenefitsAllows neat and secure storage of multiple bait typesExcellent visibility of contents without opening the bagSuitable for use with liquid additives and glugsCompact dimensions make transport and storage easierA practical solution for anglers who want quick access to bait at the swimNoteThe product is supplied with 6 bait pots. Availability may vary, and for warranty details please check the information in the store.