Novosti

Short OverviewPreston Innovations PR322 Competition Match are quality match hooks designed for anglers looking for more secure hooking and reliable bait presentation. This model features a micro barb, wide gape, and fine wire, making it an excellent choice for competition and precise float fishing.DescriptionThe PR322 Competition Match model was developed for situations where fast penetration, secure fish holding, and neat bait presentation are important. The hook’s wide gape improves hooking efficiency, while the in-turned point and micro barb help keep fish on during the fight. Thanks to the thin wire and discreet nickel finish, the hook is suitable for match fishing, float fishing, and a finesse approach with baits such as worms, casters, bread, and corn.FeaturesHook with micro barb for more secure fish retentionWide gape for better bait presentation and more effective hookingCrystal bend shape for a stable holdIn-turned point for reliable hookingFine wire for more natural bait presentationNickel finish for a discreet appearance and durabilityTechnologyPR Competition Match design for competition and precise fishingMicro barb construction for added security during the fightCrystal bend profile for effective penetration and hook stabilitySpecificationsBrandPreston InnovationsModelPR322 Competition MatchHook typeBarbed (micro barb)Gape shapeWide gapeBend profileCrystal bendPointIn-turned pointWireFine wireFinishNickelAvailable VariantsSize 12Nickel plated, wide gape, very sharp micro barbSize 14Suitable for pole fishing; also listed in a version tied to a 20 cm hooklengthSize 16Fine wireSize 18Fine wireSize 20Fine wireSize 22Available variantAdvantagesAn excellent choice for match fishing and float fishingMore secure hooking thanks to the micro barb and in-turned pointFine wire allows more natural presentation of delicate baitsThe wide gape improves bite conversion and landing efficiencyThe discreet nickel finish is suited to demanding fishing conditionsNoteAvailability of certain sizes may vary. Use barbed hooks only on waters where they are permitted by the rules; for warranty and stock information, please check the details in the store.

Quick OverviewPreston Innovations PR333 Competition Match are quality match hooks designed for competitive and precise float fishing. Thanks to the wide gape, micro barb, and in-turned beaked point, they offer secure hooking and good fish retention.DescriptionThis model was developed for anglers looking for a reliable hook for fine and precise bait presentation in match fishing and float fishing. The medium-fine wire provides a good balance between sensitivity and strength, while the bronze finish ensures a more discreet presentation in the water and long-lasting use. The PR333 stands out particularly in situations where barbed hooks are allowed and when it is important to maintain secure control over the fish during the fight.FeaturesHook with micro barb for more secure fish holding.Wide gape for better bait presentation and more efficient hooking.Crystal bend for reliable hooking performance.In-turned beaked point for a stable hold.Medium-fine wire for a good balance of strength and finesse.Bronze finish for reduced reflection and good durability.TechnologyREFLO Power line – the Hooks to Nylon variant is tied to a 20 cm hooklength for pole fishing.SpecificationsBrandPreston InnovationsModelPR333 Competition MatchTypeBarbed match hooksMaterial / wireMedium-fine wireColorBronzeShapeWide gape, crystal bendPointIn-turned beaked pointAdditionalMicro barbHooks to Nylon variantTied to a 20 cm hooklength made from REFLO Power line for pole fishingAvailable VariantsSize 12Size 14Size 16Size 18Size 20Size 22AdvantagesAn excellent choice for match fishing and float fishing.More secure fish retention thanks to the micro barb and point shape.Precise and natural presentation of smaller baits.Discreet bronze finish suitable for cautious fish.Reliable balance of finesse and strength for competition conditions.NoteAvailability of certain sizes may vary. Use barbed hooks only on waters where such hooks are permitted.

Short OverviewPreston Innovations PR355 Competition Match are high-quality competition hooks with a micro barb, designed for anglers seeking secure hooking and reliable fish retention. They are an ideal choice for float fishing, match fishing, and fine feeder presentations with natural baits.DescriptionThe PR355 Competition Match model was developed for precise bait presentation and stable fish hooking in competition and recreational fishing. The wide hook gape, Crystal bend shape, and in-turned beaked point provide an excellent balance between fast penetration, secure holding, and natural bait presentation. The medium-gauge wire and bronze finish make this hook a versatile solution for targeting silver fish such as bream, rudd, and chub, as well as other species when a reliable barbed hook is needed.FeaturesMicro barb for more secure fish retentionWide gape shape for more effective hooking and better bait presentationCrystal bend profile for stable hook performanceIn-turned beaked point for reliable penetrationMedium-gauge wire for a good balance of strength and sensitivityBronze finish with a discreet appearance in the waterSuitable for float fishing, match fishing, and feeder hooklengthsTechnologyMicro BarbCrystal BendWide GapeIn-turned Beaked PointSpecificationsBrandPreston InnovationsModelPR355 Competition MatchHook typeHook with micro barbMaterial / wireMedium-gauge wireShapeWide gape, Crystal bendPointIn-turned beaked pointFinish / colourBronzePackaging dimensions5 × 0,1 × 1 cmWeight0,1 kg (100 g)EAN / codePRC355Available VariantsSize 6Size 8Size 10Size 12Size 14Size 16Size 18AdvantagesReliable hooking and better fish retention during the fightVersatile use with maggots, pinkies, sweetcorn, and breadAn excellent choice for competition and everyday fishingDiscreet bronze finish reduces visibilityThe size range allows adaptation to different baits and fish speciesNoteCheck local regulations regarding the use of barbed hooks before fishing. Availability of individual sizes may vary depending on stock levels.

Quick overviewThe Preston Innovations Inline Dura Banjo Feeder is a practical inline banjo feeder for feeder fishing, allowing quick adjustment of weight and size without dismantling the rig. It is an excellent choice for anglers who want precise feeding with pellets and secure bait presentation on commercial fisheries and other demanding venues.DescriptionThis model is part of the proven Preston ICS system, designed for quick feeder changes on an already prepared rig. The inline, free-running design contributes to neat presentation, while the body shape with front weighting improves casting, stability, and correct positioning on the bottom. The short stem is suitable for short and medium distances, while the long stem is for longer and more precise casts. The banjo construction with front bait protection is especially useful when fishing with pellets, groundbait, and smaller baits.FeaturesQuick size and weight changes without dismantling the entire rigInline, free-running design for neat and effective presentationTwo stems included: short for short and medium distances, long for long-range castingOval shape with a special lead arrangement for stable positioning on the bottomTapered design with weight at the front for better aerodynamicsFront bait protection on the feederCarefully arranged frame bars for secure retention of groundbait or pelletsMould with push-button release for easy loadingQuick-Change Bead for fast and practical system changesTechnologyInter Change System (ICS)In-Line Dura Banjo FeederSpecificationsBrandPreston InnovationsModelInline Dura Banjo FeederTypeInline banjo feederSystemICS (Inter Change System)DesignFree-runningShapeOval, with a tapered front sectionWeightingFront weighting for improved casting and positioningPurposeFeeder fishing, precise pellet feeding, and bait protectionContentsFeeder with two interchangeable stems and Quick-Change Bead systemAvailable variantsMicro 20gMicro size, 20 g weightMicro 30gMicro size, 30 g weightMicro 45gMicro size, 45 g weightSmall 20Small size, 20 g weightSmall 30Small size, 30 g weightSmall 45Small size, 45 g weightLarge 20Large size, 20 g weightLarge 30Large size, 30 g weightLarge 45Large size, 45 g weightBenefitsSaves time on the bank thanks to quick feeder changesImproves casting accuracy and stabilityEnables effective and secure bait presentationSuitable for different distances and fishing conditionsAn excellent choice for carp, F1s, and other species on the feederNoteAvailability of individual variants may vary depending on stock. The product is original Preston Innovations equipment; before purchase, check whether it is compatible with your existing feeder rig.

Short OverviewKorda Micro Rig Swivel is a micro rig swivel designed for the precise tying of carp rigs and neat bait presentation. Thanks to its non-reflective PTFE coating and free rotation, it is an excellent choice for anglers who want discretion, better bait movement, and more secure hook holds.DescriptionThis size 20 swivel is especially useful for blow-back rigs, bait attachment, and tying combi rig systems. Its compact design allows smooth movement and 360° bait mobility, contributing to a more natural presentation on the bottom and improving hooking efficiency. It is suitable for modern carp fishing and all situations where a refined and unobtrusive rig is important.FeaturesSize 20 micro swivel for tying hooklinks and fine rigs.Ideal for bait attachment and blow-back presentations.Can be used for combi rig systems.Non-reflective coating reduces underwater glare.Provides 360° bait movement for a more natural presentation.Helps improve fish hooking.Pack contains 20 pieces.TechnologyAnti-glare PTFE coating for more discreet presentation.Non-reflective finish for reduced visibility in the water.SpecificationsBrandKordaTypeMicro rig swivelSize20PurposeBait attachment, blow-back rigs, combi rigCoatingPTFE, non-reflectiveMobility360° bait movementPack20 piecesAdvantagesDiscreet and tidy bait presentation in pressured waters.Greater bait freedom of movement for more natural rig performance.Versatile use in different carp hooklink setups.A reliable choice for anglers looking to improve hooking efficiency.NoteThe product is supplied in a pack of 20 pieces. For best results, use it with compatible hooks and hooklink materials, and regularly check the condition of your terminal tackle.

Short overviewThe Korda Quick Change Swivel Ring Size 8 is a practical swivel with a quick change clip and ring, designed for fast hooklink changes without retying. It is an excellent choice for carp anglers using helicopter rigs who want a reliable, discreet and functional terminal setup.DescriptionThis Korda model was specially developed for use with helicopter rigs, allowing easy attachment to the hooklink or main line and quick replacement of looped hooklinks. The ring further improves the rig’s freedom of movement, while the non-reflective finish reduces reflection in the water and contributes to a more natural bait presentation. Ideal for carp fishing when you want to adapt your rig efficiently and quickly to conditions on the water.FeaturesQuick change system for fast hooklink replacementThe ring enables better rig movement and greater mobilitySpecially designed for helicopter rigsSuitable for looped hooklinksCan be threaded onto the hooklink or main lineNon-reflective coating for reduced visibility underwaterTechnologyQuick Change system for simple and fast hooklink replacementNon-reflective coating for a more discreet presentationSpecificationsBrandKordaModelQuick Change Swivel RingSize8TypeSwivel with quick change clip and ringPurposeHelicopter rigsUseThreaded onto the hooklink or main lineCompatibilityLooped hooklinks, Dark Matter Anti Tangle SleeveFinishNon-reflectiveColourNon-reflectiveProduct codeKQR8AdvantagesSaves time when changing hooklinks on the bankImproves the functionality and presentation of the helicopter rigReduces unwanted underwater reflectionsA reliable solution for modern carp fishingNoteThe product is supplied as a single variant in size 8. For safe use, it is recommended to use it with a suitable anti-tangle or protective sleeve.

Quick OverviewKorda Rig Rings are high-quality rings for tying modern carp rigs, designed for smooth sliding and a more natural bait presentation. Thanks to the PTFE coating and discreet black, non-reflective finish, they are an excellent choice for anglers who want reliable and unobtrusive terminal tackle.DescriptionThese rings are intended for tying and adjusting various carp rigs where bait freedom of movement is key to better presentation. They are especially suitable for blowback rig, chod rig, D-rig and IQ D-rig setups, while the smooth edges and PTFE/Teflon coating allow unrestricted movement without unnecessary friction. Korda Rig Rings fit easily into various rig configurations and help with fine-tuning hair length and bait movement.FeaturesMetal rings with a very smooth PTFE coatingBlack, non-reflective finish for greater discretionSmooth edges for unrestricted slidingIdeal for blowback rig, chod rig, D-rig and IQ D-rigProvide more natural bait movement and better presentationPack contains 20 piecesTechnologyPTFE coatingTeflon coatingHybrid metal technologiesSpecificationsBrandKordaModelRig RingsMaterialMetal with PTFE (Teflon) coatingColorBlack, non-reflectivePurposeTying carp hooklinks and rigsApplicationBlowback rig, chod rig, D-rig, IQ D-rigEdgesSmoothMovementFree slidingQuantity per pack20 pcsAvailable VariantsSmallInner diameter 2,00 mm; outer diameter 3,13 mmMediumInner diameter 2,33 mm; outer diameter 3,57 mmAdvantagesImprove natural bait presentationReduce friction and allow smoother rig movementDiscreet finish reduces glare underwaterSuitable for multiple popular carp rig setupsReliable Korda quality for more demanding carp fishingNoteAvailability of individual sizes may vary depending on stock levels. Before purchase, choose the appropriate variant according to the rig type and bait size.

Quick OverviewKorda Super Stiff Shrink Tube is a high-quality shrink tube for creating more effective carp rigs. After heating, it becomes extremely stiff, holds its shape, and helps improve hook rotation and more secure hook holds. It is ideal for anglers who want precise kickers, line aligners, and a neater bait presentation.DescriptionThis shrink tube was developed for fine-tuning rig mechanics in carp fishing. It can be used to create kickers, hook shank extensions, and line aligner solutions that improve hook turning in the fish’s mouth. It shrinks easily with heat, and after shrinking it remains very stiff, helping the rig maintain the desired aggressive angle and work consistently on every cast.FeaturesExtremely stiff after shrinkingRetains the set shape for consistent rig performanceImproves rig mechanics and the hook turning angleCan be used as a line alignerHelps the hook turn faster in the carp’s mouthStraightens when a fish is hookedShrinks easily using steam or hot waterEach piece is 55 mm longPack contains 8 piecesTechnologyHeat-shrink tubing material for precise and reliable rig shapingSpecificationsBrandKordaProduct NameSuper Stiff Shrink TubeTypeShrink tubeMaterialHeat-shrink tubingLength55 mmApplicationKickers, line aligner, hook shank extensionsActivationHeat, steam or hot waterPack Quantity8 piecesAvailable colours in the rangeClay, Clear, Gravel, Silt, WeedAvailable VariantsShrink Tube 1.6mmShrink Tube 1.8mmShrink Tube 2.7mmBenefitsHelps create a more aggressive and effective carp rigImproves bait presentation and hook performanceAllows precise and repeatable rig tyingSuitable for anglers who want neater and more reliable terminal rigsMultiple diameters make it easier to match different hook sizes and rigsNoteColours and availability of individual versions may vary depending on stock. For best results, choose a diameter matched to the hook and shrink the tube carefully, without exposing it to an open flame.

Short OverviewKorda Shrink Tube is a high-quality heat shrink tube for creating neat and effective fishing rigs. It is ideal for carp fishing when you want to form a more aggressive hook angle, improve hook turning, and achieve more secure hook holds.DescriptionThis heat shrink tube is used to create a kicker effect on the hook and to direct the hooklink inward more precisely, which can help improve presentation and hooking efficiency. The material is stiff enough to hold the desired shape, but it straightens under load to reduce the possibility of damage during the fight with the fish. It is suitable for various carp rigs, hook adjustments, and the final finishing of hooklinks.FeaturesHeat shrink tube for making and finishing fishing rigsShrinks to approximately 1/3 of its original sizeHelps form a kicker for better hook turningStiff enough to retain its shape after heatingCan straighten under load to help reduce damageSuitable for discreet presentation in different bottom conditionsPack contains 8 piecesLength of each piece: 55 mmTechnologyHeat-shrink tube material with an approximate 3:1 shrink ratioSpecificationsBrandKordaProduct NameShrink TubeMaterialHeat shrink tubePiece Length55 mmShrink RatioApproximately 3:1Pack8 piecesPurposeCreating a kicker, directing the hooklink, neater rig presentationAvailable colours in the rangeClay, Clear, Gravel, Silt, WeedAvailable VariantsShrink Tube 1.2mm - clearShrink Tube 1.2mm - clayShrink Tube 1.2mm - weedKorda Shrink Tube 1.6 mm - WeedAdvantagesImproves hook turning efficiency and hooking qualityAllows for a neater and more discreet rig presentationEasy to apply with steam or hot waterA practical choice for carp hooklinks and fine rig finishingMultiple colours help it blend better with the lakebedNoteThe product is available depending on the selected variant and stock status. For best results, heat gradually and avoid direct open flame.

Short overviewThe Guru Method Feeder (X-Safe System) is a high-quality method feeder designed for precise feeder fishing on commercial fisheries, lakes, and other stillwaters. It is designed for safer bait presentation, long and stable casting, and maximum fish safety during the fight.DescriptionThis Guru feeder has been developed for anglers who want reliable and consistent feeding on the same spot, with proper bait presentation on top of the groundbait. The bait platform is centrally positioned, while the weight-forward construction improves aerodynamics and casting accuracy. It is an excellent choice for method feeder fishing with groundbait and micro pellets, especially when loading speed, flight stability, and rig safety are important.FeaturesThe bait platform allows proper and visible presentation of the hook and bait.X-shaped solid vented arms ensure good groundbait grip and quick release.Forward-shifted centre of gravity for long, stable, and accurate casting.Safe free-sliding inline design for safer system operation.Interchangeable feeder system for adapting to different fishing conditions.Includes tail rubber for reliable and secure system connection.Suitable for fishing with groundbait and micro pellets.TechnologyX-Safe SystemThe X-Safe elastic system reduces the possibility of tethering and helps keep the rig safe for fish in the event of a breakage.SpecificationsBrandGuruProduct typeMethod feederSystemX-Safe SystemDesignSafe free-sliding inlineBait platformCentral platform for hookbaitArmsX Shape Solid Vented ArmsLoadingWeight forward loadingExchange systemInterchangeable feeder systemAccessoryTail RubberRecommended useMethod feeder fishing with groundbait and micro pelletsAvailable variants24g SmallWeight 24 g, size Small28g LargeWeight 28 g, size Large36g SmallWeight 36 g, size Small45g LargeWeight 45 g, size LargeAdvantagesMore precise feeding and more consistent bait presentation.Fast feeder loading and good groundbait hold during the cast.More stable flight and better control on longer casts.Greater fish safety thanks to the X-Safe system.Practical adjustment to different feeder conditions and distances.NoteAvailability of individual variants may vary depending on stock levels. It is recommended to choose the weight and size according to casting distance, depth, and the amount of groundbait used.

Quick OverviewThe Guru Pellet Feeder (In-Line System) is an in-line pellet feeder designed for precise feeder fishing with controlled bait release. Thanks to its front-loaded weight distribution and open construction, it is an excellent choice for anglers looking for longer casts, improved accuracy, and reliable bait presentation.DescriptionThis feeder was developed for use with softened pellets up to 4 mm, when fast loading and efficient bait release on the bottom are required. The compact and ventilated construction allows the contents to break down properly, while the in-line system and arm shape help reduce tangles. It is especially useful in feeder fishing on commercial waters, lakes, and swims where accurate bait delivery is important with minimal time lost when recasting.FeaturesSuitable for softened pellets up to 4 mm.Fast loading and easy bait release.Compact, open design for efficient pellet release.Weighted for better casting and more stable flight.Front-loaded weight distribution for greater accuracy and distance.X-shaped, ventilated arms for fewer tangles and better bait retention.Designed for neat and secure presentation in feeder fishing.TechnologyIn-Line System for direct rig guidance and a neater setup.X-Safe system for safer and more functional use within the Guru system.SpecificationsBrandGuruProduct typeIn-line pellet feederPurposeFeeder fishing with softened pelletsRecommended baitSoftened pellets up to 4 mmDesignCompact, open designWeight distributionFront-loaded for greater accuracy and distanceArm constructionX-shaped, ventilated armsSystemIn-Line SystemTechnologyX-Safe systemAvailable Variants24g Small24 g28g Large28 gAdvantagesEnables more accurate and longer casts.Reduces tangles during casting and presentation.Loads quickly, saving time in active feeder fishing.Controlled pellet release increases feeding efficiency.An excellent choice for anglers who want a neat and reliable in-line system.NoteVariant availability may vary depending on stock levels. Before purchasing, check whether the selected weight matches your rod, rig, and fishing conditions.

Quick OverviewThe Guru Bait Drill is a precision bait drill designed for drilling hard pellets and boilies without unnecessary cracking or damage. It is an excellent choice for anglers who want to prepare bait quickly, neatly, and safely for feeder and carp fishing.DescriptionThis practical Guru drill is designed for situations where hard baits need to be drilled for hair rigs or similar presentations. The super-fine 1 mm diameter needle easily passes through harder pellets and boilies, while the flattened handle provides a better grip and more precise control during use, even when your hands are wet.FeaturesPrecision 1 mm diameter needle for drilling hard pellets and boiliesDoes not split baits when used correctlyFlattened handle for a secure and stable gripTotal length 150 mmRobust and durable construction for frequent useSuitable for preparing baits for hair rigs and similar fishing setupsSpecificationsBrandGuruProduct NameBait DrillProduct TypeBait drillNeedle Diameter1 mmLength150 mmHandleFlattened, for better gripPurposeDrilling hard pellets and boiliesProduct CodeGBDBenefitsAllows faster and neater bait preparationReduces the chance of hard pellets and boilies crackingProvides better control during drillingCompact tool that easily fits into a tackle boxA reliable accessory for feeder and carp fishingNoteThe product is supplied in one variant. After use, rinsing and drying are recommended, and due to the sharp tip, the tool should be used carefully and kept out of reach of children.

Short OverviewThe Guru Bait Umbrella is a compact bait umbrella that effectively protects groundbait, baits, and your work surface from rain, sun, and overheating. It is ideal for feeder and match anglers who want neat and protected bait preparation by the water.DescriptionThis practical fishing umbrella is designed to be positioned above a bucket, bait table, or working position on a seatbox system. Thanks to its 90 x 90 cm coverage, lightweight construction, and tilting capability, it provides reliable protection in changing conditions during both competition and recreational fishing. It fits standard brolly mounts for seatbox systems and folds down compactly for easy transport.FeaturesApproximately 90 x 90 cm coverage for effective protection of baits and tackle.Made from durable 210D material.The package includes two pole options: a fixed 60 cm pole and a telescopic spike.Threaded tilt mechanism for precise angle adjustment.Removable pole for using the tilt function.Adjustable central pole for easier setup adjustment.Fits standard brolly seatbox mounts.Folds compactly and is easy to carry.Reinforced base on the carry bag reduces wear during use.TechnologyThe Threaded angle tilt system enables stable and precise tilt adjustment.The Reinforced base carry bag construction increases the durability of the carry bag.SpecificationsBrandGuruModelBait UmbrellaDimensions90 x 90 cmMaterial210DPole optionsFixed 60 cm and telescopic spikeTiltYes, threaded tilt mechanismAdjustable central poleYesCompatibilityStandard brolly seatbox mounts (not included)TransportCompact foldingProduct codeGB1AdvantagesProtects baits and groundbait from rain, strong sun, and drying out.Allows for tidier and more efficient preparation while fishing.Quick to set up and easy to adjust to different positions.The compact and lightweight design is excellent for transport to competitions and shorter fishing sessions.Robust construction ensures long-lasting use in demanding conditions.NoteThe product is supplied without seatbox mounts. Availability may vary, and the photos are for illustrative purposes only.

Quick OverviewThe Guru Baiting Needle is a precision baiting needle designed for safe and fast mounting of baits onto a hair rig. The ultra-fine point and concealed barb reduce damage to delicate baits while still allowing enough pressure to be applied when working with harder baits. It is an excellent choice for feeder, carp, and method fishing.DescriptionThis Guru baiting needle was developed for anglers looking for a reliable tool for preparing rigs with corn, boilies, soft pellets, and meat. The tapered point passes through the bait more easily, while the recessed barb helps catch the loop or hair without unnecessarily splitting the bait. The flared handle provides a secure grip and better control during mounting, whether you are fishing on commercial waters, lakes, or canals.FeaturesUltra-fine tapered point for precise bait piercingConcealed and recessed barb for safer catching of the hair or loopReduces damage to delicate baits during mountingAllows pressure to be applied with harder baitsSuitable for corn, boilies, soft pellets, and meatFlared handle for a secure and comfortable gripCompatible with braided line and monofilament hairsTechnologyFine tapered pointConcealed barbRecessed barb designFlared handleSpecificationsBrandGuruModelBaiting NeedleSKUGBNTool typeBaiting needleMaterialStainless steelWeight10 g (approx.)Needle diameter1 mm (approx.)Handle diameter2 cm (approx.)Point designUltra-fine tapered point with concealed barbHandleFlared for better gripCompatible baitsCorn, boilies, soft pellets, meatHair compatibilityBraided line and monofilamentBenefitsFaster and safer mounting of baits onto a hair rigLower risk of cracking and splitting delicate baitsBetter control when working with hard and soft baitsReliable stainless steel construction for long-lasting useVersatile tool for multiple fishing techniques and presentationsNoteThe product is supplied as one baiting needle. Due to the sharp point, careful handling is recommended and it should be stored in a safe place after use.

Quick OverviewThe Guru Commercial Cage Feeder is a robust cage feeder designed for precise feeder fishing on commercial fisheries and other demanding venues. Thanks to its weight-forward design, strong frame, and large openings, it enables accurate casts and fast release of groundbait. It is an excellent choice for match anglers and recreational anglers looking for reliability and effective bait presentation.DescriptionThis Guru feeder has been developed for situations where stable flight, quick emptying of the contents, and adaptability to different bait types are important. It is suitable for feeder fishing with pellets, groundbait, chopped worms, casters, and diced luncheon meat. The construction with large perforations speeds up the washout of the contents, while the durable frame and camouflage finish contribute to longevity and a more discreet presentation in the water.FeaturesWeight-forward design for more accurate and stable castingVery strong and durable frame for a long service lifeLarge openings for fast release of groundbait and baitCan be used with swivel and inline setupsCamouflage finish for a more discreet presentationSuitable for pellets, groundbait, chopped worms, casters, and diced luncheon meatSupplied complete with an inline tube and rigid stem with swivelCompatible and interchangeable with the X-Safe systemTechnologyX-Safe compatibility for quick feeder system changes and adaptationWeight-forward construction for better flight control when castingAdvanced-camou colouration for a more discreet appearance in the waterSpecificationsBrandGuruModelCommercial Cage FeederTypeCage feederWeight25 g or 30 gConstructionSuper-strong and durable frameDesignWeight-forward for more accurate castingBait releaseLarge openings for fast washout and release of contentsMounting optionsSwivel and inline optionColourCamouflage finishCompatibilityX-Safe systemIncluded accessoriesInline tube and rigid stem with swivelApplicationFeeder fishing on commercial fisheries and other still or slow-flowing watersRecommended baitsPellets, groundbait, chopped worms, casters, diced luncheon meatAvailable VariantsMini25 gSmall25 gMedium30 gLarge30 gAdvantagesMore accurate casting thanks to the weight-forward weight distributionFast release of contents for more effective presentation on the feed areaVersatile use with multiple bait and groundbait typesReliable and durable performance for intensive useEasy system adjustment thanks to inline and X-Safe compatibilityNoteAvailability of individual variants may vary depending on stock levels. Before purchasing, check the appropriate weight and size according to casting distance and the type of bait you use.

Quick OverviewThe Guru Rear Reaper Rest is a high-quality rear rod rest designed to provide secure support and quick rod pickup on the bite. It is intended for anglers looking for stability, handle protection, and reliable performance in feeder, match, and other freshwater fishing techniques.DescriptionThis rear rod rest was developed to hold the lower section of the rod firmly without damaging the handle, while also allowing instant release when striking or taking control of the fish. The flexible rubber construction adapts to different handle shapes and diameters, making it an excellent choice for anglers who use multiple rod types during a single season.FeaturesSecurely holds the rear section of the rod while waiting for a bite.Soft rubber construction reduces the possibility of handle damage.The flexible shape adapts to different handle types.Suitable for cork, Duplon, and abbreviated rod handles.Fits all types of rod butt sections.The brass thread ensures reliable and long-lasting attachment.The rubberised outer layer improves grip and stability.Designed for a firm rod hold with quick release.SpecificationsBrandGuruProduct NameRear Reaper RestTypeRear rod restMaterialSoft rubberColourBlackThreadBrass threadCompatibilityFor cork, Duplon, and abbreviated rod handles; suitable for all types of rod butt sectionsEAN5060196182459BenefitsProvides stable and secure support for the rod on a stand or holder.Allows quick rod pickup without snagging.Protects the handle thanks to the soft rubber construction.Universal use for multiple rod types and fishing situations.Robust construction ensures a long service life in everyday fishing.NoteProduct availability is subject to stock status. Photos are for illustrative purposes, and the rod and stand are not included.