Novosti

Quick OverviewGuru Super Pellet Waggler Bait Band 24" are ready-made hooklengths designed for pellet waggler fishing and precise bait presentation in the upper layers of the water. They are equipped with a short hair, bait band, and a PTFE-coated barbless hook, making them an excellent choice for both match and recreational cyprinid fishing.DescriptionThese ready-made hooklengths were developed for pellet fishing, where speed of setup, consistent presentation, and reliability are crucial. The 24 inch (60,96 cm) length is particularly suited to the pellet waggler technique, while the Guru N-Gauge hooklength line provides a good balance of strength, durability, and natural presentation. The short hair with elastic bait band allows quick and secure pellet mounting without additional tying on the bank.FeaturesReady-made hooklengths, 24 inch (60,96 cm) longDesigned for pellet waggler fishingSuper PW barbless hookPTFE coating for easier penetration and durabilityShort hair for neat and effective bait presentationBuilt-in bait band for quick pellet mountingMade from Guru N-Gauge hooklength lineTechnologyGuru N-Gauge line – high-quality hooklength line for reliable strength and control during the fightPTFE Coated – hook coating that improves penetration and contributes to durabilitySpecificationsBrandGuruProduct nameSuper Pellet Waggler Bait Band 24"Length24 inch (60,96 cm)Hooklength materialGuru N-Gauge lineHook typeSuper PWBarbBarblessHook coatingPTFEBait mounting systemBait bandHairShortApplicationPellet waggler, pellet fishing in the upper water layerAvailable VariantsHook sizeDiameter / strength120,22 mm / 9 lb140,19 mm / 7 lb160,17 mm / 6 lb180,17 mm / 6 lb200,15 mmAdvantagesSaves time because the hooklength is ready to useConsistent quality and uniform bait presentationAn excellent choice for commercial fisheries and active cyprinid fishingThe bait band allows quick pellet mounting without a needle or additional tyingMultiple hook sizes and line diameters for adapting to different conditions on the waterNoteAvailability of individual variants may vary depending on stock levels. Before purchasing, check the fishery rules, as many venues and commercial fisheries require barbless hooks.

Short OverviewThe Korum LE Fleece Waterproof Cap is a practical fishing cap for colder and wetter conditions on the bank. The lightweight water-repellent material, warm fleece lining, and peak provide comfort, protection, and better concentration while fishing. It is an excellent choice for carp fishing, feeder fishing, and outdoor use in general.DescriptionThis cap is designed for anglers who want to stay dry and protected without feeling extra weight on their head. It is made from lightweight rip-stop material with water-repellent properties, while the fleece lining helps retain warmth during cold mornings, wind, and changeable weather. The peak also protects the eyes from rain and glare, while the adjustable strap allows a secure and comfortable fit during active fishing.FeaturesLightweight water-repellent material for protection against moisture and light rainWarm fleece lining for greater comfort in colder conditionsRip-stop construction for better resistance to wearPeak reduces glare and protects the eyes from sun and precipitationAdjustable strap for a secure and adaptable fitOne size fits most usersTechnologyRip-stop material for increased durability and resistance to damageFleece lining for better thermal comfortWater-repellent outer fabric for reliable protection on the bankSpecificationsBrandKorumProduct NameLE Fleece Waterproof CapTypeFishing cap with peakMaterialLightweight water-repellent rip-stop materialLiningFleeceSizeUniversalAdjustmentAdjustable strapColoursOlive, BurgundyPurposeFishing and outdoor activitiesAvailable VariantsOliveUniversal sizeBurgundyLimited edition, universal sizeBenefitsProvides warmth and protection in cold and wet conditionsLightweight construction does not feel heavy during all-day wearPeak improves visibility on the bank by reducing glareDurable material suitable for frequent use outdoorsUniversal size and adjustable strap make fitting easierNoteAvailability of certain colours and variants may vary. Please check current stock status and the selected variant before ordering.

Quick OverviewMainline Limited Edition PopUps are limited-edition 15 mm pop-up boilies, developed for maximum attraction and reliable buoyancy. They are an excellent choice for carp fishing, especially when you need a highly visible bait for single hookbait presentations, quick sessions, and fishing in colder water.DescriptionThese pop-up boilies combine premium flavours, sweeteners, and attractors to deliver a strong signal around the bait and maintain a stable presentation on the bottom or above it. They are suitable for various fishing situations, including year-round use, winter fishing, and high-attract tactics when you want to trigger a quick reaction from fish. Thanks to their distinctive colours and flavour profiles, they are easy to incorporate into modern carp rigs.FeaturesLimited-edition 15 mm pop-up boiliesReliable and long-lasting buoyancySuper-attractive flavour blend for a quick fish responseSuitable for all fishing situations, including winterExcellent for single hookbait tactics and standout presentationsThree different flavour profiles and visually striking coloursTechnologyCombination of premium flavours, sweeteners, and attractors for enhanced bait attractionSpecificationsProduct typePop-up boiliesDiameter15 mmColoursPink (Calypso), White (Sushi), Yellow (Moroccan Spice)BuoyancyReliable and long-lastingIntended useCarp fishing, winter fishing, single hookbait tacticsMain featuresSuper-attractive flavour, stable presentation, year-round useAvailable VariantsSushi 15mm ( White )Fish flavourCalypso 15mm ( Pink )Fruit flavourMoroccan Spice 15mm ( Yellow )Spicy flavourBenefitsHighly effective when you need to quickly attract fish to the baited areaAn excellent choice for a single hookbait and modern carp rigsDifferent flavour profiles cover a wider range of fishing situationsVisible colours help with presentation and further highlight the baitMainline quality for reliable results on the bankNoteVariant availability may change depending on stock levels. Store the product in a cool, dry place and keep out of reach of children.

Brief OverviewMainline Dumbell Wafters 6 mm are balanced wafter hookbaits designed for precise and natural presentation in feeder and match fishing. Thanks to their critically balanced buoyancy and strong attraction, they are an excellent choice for anglers who want more converted bites and better fish selection.DescriptionThese dumbell baits lift the hook and present the bait just above the bottom, making it easier for fish to suck in and increasing the chance of a solid hook-up. They are especially effective in method feeder tactics, classic feeder fishing, and short, intensive fishing sessions over feed, pellets, or groundbait. Suitable for use on bait bands, hair rigs, or bayonets.FeaturesBalanced wafter hookbaits in a dumbell shape6 mm size for discreet and effective presentationCritically balanced with a size 12 Guru QM1 hookHigh attraction and enhanced flavour releaseReduce the effective weight of the hook for better hooking potentialEasy to use on bait bands, hair rigs, or bayonetsPractical packaging with a screw-top lidSpecificationsBrandMainlineTypeBalanced dumbell-shaped wafter hookbaitSize6 mmBuoyancyCritically balancedPurposeFeeder and match fishing, including method feederApplicationBait bands, hair rig, bayonetPack weight0,20 kg (200 g)EAN5060509815678Available VariantsOrange - ChocolateWhite - CellTMPink - TunaYellow - PineappleRed KrillYellow Essential CellAdvantagesMore natural bait presentation above the bottomBetter bait intake and greater hooking efficiencyAn excellent choice for competitive and recreational feeder fishingMore attraction in a compact and practical bait formatReliable quality and proven Mainline performanceNoteAvailability of individual variants may vary depending on stock levels. Store the product in a dry, cool place, tightly closed after use.

Quick OverviewThe Preston Innovations XL Roller Pulla Bush is designed for anglers seeking smooth and reliable side extraction of pole elastic from the top kit. Thanks to its PTFE construction and enlarged internal bore, it is ideal for thicker elastics up to 4 mm and for more precise fish control during the fight.DescriptionThis XL Roller Pulla Bush was developed for competitive and recreational pole fishing, when reliable control of elastic without unnecessary friction is required. The enlarged internal PTFE bore allows smooth operation with thicker elastics as well, while the construction supports installation on existing Roller Pulla systems and top kits with suitable reinforcement.FeaturesMade from PTFE material with very low frictionEnlarged internal bore for using thicker pole elasticsSupports elastics up to 4 mmUltra-smooth action for even elastic خروجCan be fitted into an existing Roller Pulla KitSuitable for top kits with reinforced wrapTechnologyPTFE roller system for smooth elastic flow and reduced frictionSpecificationsBrandPreston InnovationsProduct NameXL Roller Pulla BushMaterialPTFEPurposeSide extraction of pole elasticMaximum Elastic Thicknessup to 4 mmCompatibilityExisting Roller Pulla Kit systemsSuitable forTop kits with reinforced wrapCodeP0020092BenefitsReduces friction and wear on the elasticAllows the use of thicker elastics for targeting larger fishImproves control during the fight and extractionFits easily into existing Roller Pulla systemsA reliable choice for pole fishing and competitive useNoteThe product is supplied as a single component for installation in a compatible top kit. For best results, proper fitting to a suitable reinforced top kit is recommended.

Short OverviewMatrix MXC-3 Barbless are ready-tied hooklengths designed for feeder fishing, especially for method and pellet feeder approaches. They are equipped with a barbless hook, Boilie pin, and high-quality monofilament for fast, neat, and effective bait presentation. They are an excellent choice for commercial fisheries and targeted fishing for carp and other coarse fish.DescriptionThese Matrix hooklengths were developed for anglers looking for a reliable and consistent rig ready for immediate use. The short 10 cm length is particularly suited to method feeder and pellet feeder techniques, where precise bait presentation is key to quick bite conversion. Thanks to the out-turned eye and Boilie pin, baits such as pellets, corn, and boilies are easy to mount, while the hair rig presentation remains natural and stable.FeaturesReady-tied 4" (10 cm) hooklengthMatrix MXC-3 barbless hookPTFE coating for better penetration and durabilityOut-turned eye for a neater hair rigBoilie pin for quick bait mountingPower Micron monofilament for reliability and controlStrong hook wire for secure fish playingBlack hook finish for more discreet presentationIdeal for commercial carp fishingSuitable for pellets, corn, and boiliesTechnologyPTFE coated – smoother hook penetration and increased resistancePower Micron monofilament – high-quality hooklength material for dependable durabilityOut-turned eye – improved presentation for hair rig setupsSpecificationsProduct typeReady-tied hooklengths with hookHook modelMatrix MXC-3 BarblessHook typeBarblessCoatingPTFEEyeOut-turnedHook materialStrong wireColourBlackHooklength length4" (10 cm)Hooklength materialPower Micron monofilamentApplicationMethod feeder, pellet feeder, commercial carp fishingSuitable baitsPellets, corn, boiliesPack size8 pcsAvailable VariantsHook size16Line diameter0,165 mmHooklength length4" (10 cm)RigBoilie PinPack size8 pcsHook size14Line diameter0,18 mmHooklength length4" (10 cm)RigBoilie PinPack size8 pcsHook size12Line diameter0,20 mmHooklength length4" (10 cm)RigBoilie PinPack size8 pcsAdvantagesReady to use with no additional tying requiredFast and secure bait mounting using the Boilie pinExcellent presentation for method feeder and pellet feeder fishingBarbless hooks suitable for waters with specific regulationsA reliable combination of sharpness, strength, and discretionNoteAvailability of individual variants depends on stock status. Before fishing, check the fishery rules regarding the use of barbless hooks and choose the appropriate hooklength size.

Quick OverviewMatrix MXC-4 Size Barbless are ready tied feeder hooklengths designed for anglers looking for reliable bait presentation and secure fish hooking without a barb. They are equipped with an extra strong wide gape hook with a PTFE coating and an X-Strong Boilie Pin system, making them an excellent choice for feeder and pellet waggler fishing.DescriptionThese professionally made hooklengths are developed for targeting larger fish with feeder or pellet waggler techniques, where strength, precision, and quick bait changes are important. The large hook eye makes correct tying and hooklength setup easier, while the X-Strong Boilie Pin allows neat presentation of corn, meat, pellets, paste, and similar baits. The 4 in (10 cm) length is especially suited to modern feeder rigs for controlled and effective presentation close to the bottom.FeaturesReady tied feeder hooklengths with barbless hooks.Extra strong wide gape hook shape for secure hooking and better fish control.PTFE coating for less resistance on penetration and greater durability.Large hook eye for reliable hooklength construction.X-Strong Boilie Pin for quick and secure bait mounting.Ideal for feeder and pellet waggler fishing.Suitable for corn, meat, pellets, and paste.Pack contains 8 pieces.TechnologyPTFE coated hook – smooth protective coating for easier penetration and long-lasting sharpness.X-Strong Boilie Pin – strong system for stable bait placement without complicated rigging.SpecificationsBrandMatrixModelMXC-4 Size BarblessProduct typeReady tied feeder hooklengthHook typeBarbless, eyedHook shapeExtra strong wide gapeHook coatingPTFE coatedColourBlackHooklength length4 in (10 cm)Bait systemX-Strong Boilie PinIntended useFeeder and pellet waggler fishingRecommended baitsCorn, meat, pellets, pasteQuantity per pack8 pcsAvailable VariantsHook size16Diameter0,18 mmLength10 cmBait mountingX-Strong Boilie PinPack8 pcsHook size14Diameter0,20 mmLength10 cmBait mountingX-Strong Boilie PinPack8 pcsHook size12Diameter0,23 mmLength10 cmBait mountingX-Strong Boilie PinPack8 pcsAdvantagesReady to fish straight out of the pack.An excellent choice for targeting stronger and larger fish on the feeder.Quick bait changes and neat bait presentation thanks to the Boilie Pin system.Barbless for easier unhooking and for fishing waters with such rules.A reliable combination of a strong hook and short hooklength for a modern feeder approach.NoteAvailability of individual variants may vary depending on stock levels. Before purchase, choose the hook size and hooklength diameter according to the target fish and water conditions.

Quick OverviewMatrix X-Stretch Top & Tail Rod Bands are practical elastic bands for securely fastening the rod tip and handle during transport and storage. Thick neoprene sleeves and an adjustable elastic strap protect the blank and guides from damage. They are an excellent choice for anglers who want to keep their rods stored neatly and safely.DescriptionThese protective bands were developed for reliable rod protection during transport, whether for match, feeder, or other fishing techniques. They are designed to be fitted to the tip and butt section of the rod, and thanks to their stretch construction and firm grip, they allow quick fastening without unnecessary pressure on sensitive parts of the equipment. Suitable for rods from 9 ft (2,7 m) to 14 ft (4,3 m) in length.FeaturesThick neoprene sleeves for added rod protection during transport.Designed for the rod tip and handle.The adjustable elastic strap provides secure and stable fastening.Help protect the blank and guides from scratches and impacts.Suitable for rods from 2,7 m to 4,3 m in length.Compact and easy to use and store.SpecificationsBrandMatrixModelX-Stretch Top & Tail Rod BandsSKUGAC450TypeElastic rod bandsMaterialThick neoprene sleevesClosureAdjustable elastic strapPieces per pack2PurposeRod protection during transport and storageCompatibilityRods from 9 ft (2,7 m) to 14 ft (4,3 m) in lengthBenefitsSecurely keep rod sections in place during transport.Reduce the risk of damage to the blank, guides, and end sections.Quick to fit and remove.Universal use for a wide range of fishing rods.Matrix quality and practicality for everyday use.NoteBefore use, check that the bands are fitted correctly so the rod is securely fastened. Product availability may vary, and the product comes with a warranty in accordance with the manufacturer's and retailer's terms.

Quick OverviewThe Preston Innovations Soft Cad Pot - Paste is a practical pole fishing pot designed for precise feeding with paste and other baits. The soft material, high walls, and two different lids make it an excellent choice for both match and recreational pole fishing.DescriptionThis pole pot was developed for fast, secure, and controlled placement of larger balls of paste directly onto the feeding spot. Thanks to the larger attachment diameter, it can be mounted lower on the pole for better balance and easier handling, while the perforated walls and interchangeable lids allow the feeding method to be adjusted depending on water conditions and the type of bait.FeaturesHigh walls for easier and safer holding of larger balls of pasteLarger attachment diameter for stable mounting on the poleTwo lids per pot: perforated and conicalPerforated holes in the walls for controlled release of the contentsSecure attachment during fishingLightweight construction for easy handlingSoft material helps protect equipment from damageVersion specially intended for loading with large balls of pasteSpecificationsBrandPreston InnovationsProduct NameSoft Cad Pot - PasteTypePole pot for pastePurposePrecise feeding with paste and other baitsMaterialSoft polymerWallsHigh, perforatedLidsPerforated and conicalAttachmentLarger attachment diameterCompatibilityPole / pole systemsQuantity in Pack2 potsSKUP0020093AdvantagesEnables very precise feeding on the chosen spotIdeal for large balls of paste and targeted bait presentationSoft material reduces the possibility of damage to the pole tip and equipmentTwo lids provide greater adaptability to different situations on the waterLightweight design makes frequent use easier during fishing and competitionsNoteThe product is supplied as the paste version, and the package contents include two pots. Please check compatibility with your pole system before purchase.

Quick OverviewThe Preston Innovations ICS Inline Dura Flat Meth Feeder is a compact method feeder for precise groundbait feeding and neat bait presentation. It is ideal for feeder fishing on commercial waters, in colder conditions, and when you want to cast quickly, frequently, and accurately.DescriptionThis inline method feeder was developed for anglers seeking reliability, easy weight changes, and consistent groundbait release. The Dura Flat shape helps the feeder sit steadily on the bottom, while the specially spaced ribs allow for correct bait placement. Thanks to the ICS system, you can change the feeder quickly without cutting the rig, which is a major advantage in modern feeder and method fishing.FeaturesFully compatible with the Preston ICS range.Precisely positioned vented holes for even groundbait release.Special spread rib configuration for better bait placement.Anti-glare finish for a more discreet presentation.Matching method moulds available.Inline construction for secure bite transmission and neat presentation.Compact Mini format for a smaller and precise amount of groundbait.TechnologyInterchange System (ICS) – quick feeder changes without retying the rig.Dura Flat design – more stable position on the bottom and effective method presentation.SpecificationsModelICS Inline Dura Flat Meth FeederBrandPreston InnovationsTypeInline method feederCompatibilityPreston ICS (Interchange System)DesignDura FlatGroundbait releasePrecisely positioned vented holesRib configurationSpread ribs for better bait placementFinishAnti-glareAccessoriesMatching method moulds available separatelyIntended useFeeder and method fishing on commercial waters and in colder conditionsAvailable VariantsMini 15 gMini 20 gMini 30 gAdvantagesVery precise presentation of a smaller amount of groundbait.Quick weight and feeder changes thanks to the ICS system.Discreet appearance on the bottom due to the anti-glare finish.Stable feeder position and effective groundbait release.An excellent choice for intensive fishing with frequent casting.NoteMethod mould sold separately. Availability of individual variants depends on stock levels and the current offer.

Short overviewThe Preston Innovations Preston Cap is a comfortable and practical fishing cap with a firm peak and adjustable hook-and-loop closure. It is intended for anglers looking for sun protection, a good fit, and all-day comfort by the water. The White Mesh variant further improves breathability during warmer days.DescriptionThis cap is designed for fishing and other outdoor activities, when protection from glare and comfortable wear are equally important. The lightweight construction, one-size design, and easy adjustment make it an excellent choice for feeder fishing, match fishing, carp fishing, and general use by the water. The classic design fits easily into your fishing gear throughout the year.FeaturesMaterial: 80% polyester / 20% cottonWhite Mesh version with 100% polyester mesh panels for better breathabilityAdjustable hook-and-loop closure for a quick and secure fitFirm and robust peak for protection from the sun and glareOne size fits most usersLightweight and practical for all-day wearSpecificationsBrandPreston InnovationsModelPreston CapMaterial80% polyester / 20% cottonWhite Mesh variant materialMesh, 100% polyesterAdjustmentHook-and-loop strapSizeOne sizePeakFirm, robustPurposeFishing, outdoor activities, everyday wearSeasonYear-round, White Mesh especially suitable for summerAvailable variantsBlackGreyWhite MeshBenefitsHelps reduce glare and protects the face from the sun while fishingSimple and quick adjustment to head circumferenceComfortable for longer fishing sessionsThe White Mesh variant offers extra ventilation in warm conditionsDurable materials and a practical design for frequent useNoteAvailability of individual variants may change without prior notice. Please check the warranty and purchase terms on the store page before ordering.

Short overviewThe Preston Innovations Waffle Beanie Hat is a warm and comfortable fishing hat designed for cold and windy conditions. Its double-layer construction and soft inner lining help retain warmth during long hours on the bank. It is an excellent choice for anglers looking for reliable winter protection and all-day comfort.DescriptionThe Waffle Beanie Hat is designed for winter fishing and other outdoor use when warmth and wind protection are especially important. Thanks to its soft inner layer and double construction, the hat fits comfortably and provides improved insulation in colder conditions. It is suitable for feeder fishing, match fishing, carp fishing, and general outdoor use.FeaturesWarm and comfortable design for cold daysSoft inner layer for a comfortable feel when wornDouble-layer construction for better protection against cold and windWaffle knit look for a classic outdoor styleSuitable for fishing and everyday winter useSpecificationsBrandPreston InnovationsProduct nameWaffle Beanie HatProduct codeP0200234ConstructionDouble layerInner layerSoft inner layerMaterialThe material composition is not specified in detail in the available sourcesIntended useWinter protection and outdoor useBenefitsHelps retain warmth during winter fishingComfortable for extended wear on the bankGood protection from cold wind thanks to the double-layer constructionVersatile hat for different fishing techniques and outdoor activitiesProven Preston Innovations design for practical use in cold conditionsNoteSpecifications are based on available manufacturer information and sales sources. For the full detailed material composition and additional technical data, checking the manufacturer's official documentation is recommended.

Quick overviewMatrix Ethos XRS Carbon Tip / Quiver 2,2 mm is a spare carbon feeder tip intended for anglers seeking precise bite indication and a reliable replacement for the original tip. It is ideal for fine presentations in feeder fishing on lakes, canals, and slower-moving rivers.DescriptionThis quiver tip is made of carbon to provide an excellent balance of sensitivity, fast recovery, and control during fishing. It is designed for Matrix Ethos XRS Light Feeder rods, and the 2,2 mm diameter ensures a proper fit while maintaining the rod’s intended action. It is an excellent choice when you need a replacement tip for different feeder weights and water conditions.FeaturesSpare carbon quiver tip with a 2,2 mm diameterHigh sensitivity for fast and clear bite indicationCompatible with Matrix Ethos XRS Light Feeder 11 ft (3,35 m) 30 g and 11'6'' (3,51 m) 35 gQuick and easy replacement of a worn or damaged tipSuitable for fine feeder presentations and fishing on calmer watersSpecificationsBrandMatrixModelEthos XRS Carbon Tip / QuiverMaterialCarbonDiameter2,2 mmCompatibilityMatrix Ethos XRS Light Feeder 11 ft (3,35 m) 30 g and 11'6'' (3,51 m) 35 gAvailable variants0.5ozCarbon tip 2,2 mm0.75ozCarbon tip 2,2 mm1.0ozCarbon tip 2,2 mmAdvantagesImproves detection of even the most subtle bitesAllows tip strength to be matched to fishing conditionsExtends the service life of the feeder rod without the need to buy a new setPrecisely fits compatible Ethos XRS Light Feeder modelsNoteBefore purchase, check the tip seat diameter and compatibility with your rod. Availability of individual variants may vary depending on stock levels.

Short overviewThe Matrix Ethos XRF Carbon Quiver Tip 2,8 mm is a high-quality carbon feeder tip designed for anglers seeking high sensitivity, precise bite indication, and reliable control while fishing. It is ideal for feeder fishing on stillwaters and running waters, when it is important to match the tip stiffness to the conditions on the water.DescriptionThis Matrix quiver tip was developed for the Ethos XRF series and uses a 2,8 mm base diameter for secure compatibility with matching feeder rods. The carbon construction enables quick bite response, good feedback, and stable performance during casting, while the quality guides contribute to smooth line flow and better rig control. It is suitable for fine presentations, silverfish fishing, and adapting to different feeder weights and water conditions.FeaturesCarbon construction for low weight, good sensitivity, and durability.2,8 mm base diameter for compatibility with the Matrix Ethos XRF series.Large XQG SG guides for smooth line control.Suitable for feeder fishing on lakes, canals, and rivers.Multiple tip stiffness options for adapting to fishing conditions.Premium storage included.TechnologyOversized XQG SG Guides for better line control and reliable performance.Carbon construction for fast tip response and clearer bite detection.SpecificationsBrandMatrixModelEthos XRF Carbon Quiver Tip 2,8 mmProduct typeFeeder tip / quiver tipMaterialCarbonBase diameter2,8 mmGuidesOversized XQG SG GuidesWeight228 gCompatibilityMatrix Ethos XRF seriesPurposeFeeder fishing and sensitive bite detectionStoragePremium storage includedAvailable variants0,5 oz1,0 oz1,5 oz2,0 oz2,5 ozAdvantagesVery good sensitivity for registering even delicate bites.The carbon construction provides fast response and more precise tip action.A wide choice of variants makes it easier to adapt to flow, distance, and feeder weight.Reliable compatibility with Matrix Ethos XRF feeder rods with a 2,8 mm diameter.Quality guides contribute to neat line release during casting.NoteBefore purchasing, check the base diameter and compatibility with your rod. Availability of individual variants may vary, and the product is covered by a warranty in accordance with the manufacturer's and retailer's terms.

Short overviewThe Matrix Ethos XRD Carbon Tip / Quiver 3,4 mm is an original replacement carbon feeder tip for Matrix Ethos XRD rods. It delivers high sensitivity, clear bite indication, and a secure fit thanks to the 3,4 mm base diameter. Ideal for anglers who want to precisely adapt their feeder rod to water conditions.DescriptionThis quiver tip was developed for feeder fishing on commercial and natural waters, where sensitivity and presentation control are especially important. The carbon construction provides fast feedback on bites, while the larger guides make fishing at greater distances easier. The minimal colour indicator helps with clear tip tracking without unnecessary visual distractions.FeaturesOriginal Matrix replacement quiver tip for Ethos XRD feeder rodsCarbon construction for sensitivity and precise bite indication3,4 mm base diameter for compatible modelsLarger guides for easier fishing at greater distancesMinimal colour indicator for better tip visibilitySuitable for adapting to different feeder fishing conditionsTechnologyXOG-N SG guidesMinimal colour indicatorSpecificationsBrandMatrixModelEthos XRD Carbon Tip / QuiverProduct typeReplacement feeder tipMaterialCarbonBase diameter3,4 mmCompatibilityMatrix Ethos XRD rodsGuidesXOG-N SG, larger guides for longer castingIndicatorMinimal colour indicatorPurposeFeeder fishingPackaging1 pcAvailable variants1 oz (28,35 g) – diameter 3,4 mm1.5 oz (42,52 g) – diameter 3,4 mm2.0 oz (56,70 g) – diameter 3,4 mm2.5 oz (70,87 g) – diameter 3,4 mm3.5 oz (99,22 g) – diameter 3,4 mmBenefitsProvides fine and clear bite detectionEasy replacement of a worn or damaged tipMultiple stiffness options available to suit the water, feeders, and casting distanceOriginal Matrix compatibility for a secure fitSuitable for competitive and recreational feeder fishingNoteBefore purchase, check the base diameter and compatibility with your Matrix Ethos XRD rod. Warranty and availability depend on the store's current offer.

Quick overviewFox Rage Hitcher Crank & Troll Jointed 100 mm 35 g SR is a jointed shallow-diving wobbler developed for targeting predators such as pike and zander. Thanks to its pronounced snaking action, UV finish, and added sound attraction, it is an excellent choice for spinning and trolling in the upper and middle water layers.DescriptionThis floating SR model is designed for situations when you want an aggressive and stable lure presentation at different retrieve speeds. The jointed construction creates a natural “snaking” movement, while the rattles in the body segments enhance the acoustic signal and further provoke predator strikes. It is suitable for fishing in lakes, reservoirs, and rivers, especially when you are looking for an active lure for covering water.FeaturesJointed shallow-diving crankbait with pronounced snaking action on the retrieveFloating SR model for fishing in the upper and middle water layersRattles in the body segments for added sound attractionStable action at different retrieve speedsUltra UV finish for better visibilityHigh-quality construction and reliable finishSuitable for spinning and trollingTechnologyUltra UV finish for enhanced lure visibilityJointed construction for a more natural and provocative actionBuilt-in rattles for an added sound effect during actionSpecificationsBrandFox RageModelHitcher Crank & Troll Jointed SRLength100 mmWeight35 gTypeFloatingActionJointed, snaking on the retrievePerformanceStable at different retrieve speedsSound attractionYes, rattles in the body segmentsRecommended techniquesSpinning, trollingAvailable variantsUV Original PerchUV Fire TigerUV Real ShinerAdvantagesHighly attractive action for active and passive predatorsAdditional sound signal increases lure visibilityEffective for spinning and trollingShallow-diving action ideal for covering shallower zones and transition areasReliable build quality for long-lasting performanceNoteAvailability of individual patterns may vary depending on stock status. It is recommended to rinse the lure after fishing and check the condition of the hooks for long-lasting and safe use.