Novosti

Short overviewFox Edges Naturals Line Aligna is a practical accessory for creating effective carp rigs without the need for shrink tubing. It is intended for anglers who want a quick, neat and discreet hook presentation with improved turning in the carp’s mouth.DescriptionThis accessory allows easy creation of a line aligner or kicker presentation and makes assembling modern carp hooklinks easier. It slides onto the hooklink and over the hook eye, creating an extended angle that helps the hook turn faster and hook more effectively. The Naturals dark green, translucent finish further improves blending with the lakebed and makes the rig less noticeable.FeaturesSimple solution for creating a line aligner or kicker presentationTwo line exit holes allow different rigging optionsEliminates the need to use shrink tubing on the hookEasily slides over the hooklink and hook eyeHelps create an angle that improves hook turning and hookingThe Naturals dark green colour blends subtly with the bottomThe translucent finish lets light through for better camouflageDesigned for hook sizes 2–6Pack contains 10 piecesSupplied in recyclable cardboard packagingTechnologyFOX EDGES Naturals terminal tackle finish for low visibility and a more natural presentationSpecificationsBrandFoxModelEdges Naturals Line AlignaColourNaturals dark greenFinishTranslucentPurposeLine aligner / kicker rigsHook compatibilitySizes 2–6Quantity in pack10 pcsRigging recommendationUse with Fox Edges Splicing Needle on softer hooklinksEAN5056212181216Available variantsShortStandardAdvantagesFaster and easier creation of carp rigsClean and neat presentation without additional shrink tubingBetter hook turning for more secure fish hookingDiscreet Naturals camouflage for wary carpSuitable for a wide range of popular hook sizesNoteVariant availability may vary depending on stock status. The product comes in original Fox packaging.

Quick overviewFox Edges Pellet Pegs are practical pellet pegs designed for the secure and effective presentation of pellets as hair-rig bait. They are ideal for anglers who want a firmer bait hold, less bait loss during the cast, and longer pellet durability in the water.DescriptionThese Fox Edges pegs were developed for use with trout and halibut pellets in situations where it is important to keep the bait stable during casting and fishing. They are shaped to create a secure anchor point in the pellet, even when the pellet softens, while also helping to close the drilled hole and slow water absorption into the centre of the bait. They can be used through the ends of the pellet or crosswise through the middle, making them a very practical accessory for various carp and specialist rigs.FeaturesDesigned for practical and effective presentation of trout and halibut pelletsSpecial profile ensures secure anchoring even when the pellet starts to soften in the waterPrevent the hair from pulling through the pellet during the cast and while fishingHelp reduce the chance of small fish knocking the stops out of the hair loopFit tightly in the drilled pellet and reduce water penetration into the centre of the baitHelp the pellet stay hard for longerCan be used lengthwise through the ends or crosswise through the middle of the pelletSpecificationsBrandFoxSeriesEdgesPurposePellet pegs / rig accessoryApplicationPresentation of trout and halibut pellets on the hairRecommended hole in pellet1,5 mmHow to useThrough the ends of the pellet or crosswise through the middleAdvantage in waterReduces water absorption into the centre of the pellet and prolongs bait hardnessAvailable variants11 mm – for use with pellets of a suitable size and a hole diameter of 1,5 mm13 mm – for use with pellets of a suitable size and a hole diameter of 1,5 mmAdvantagesMore secure pellet retention on the hairBetter bait durability during harder castingLonger retention of pellet hardness in the waterFewer unwanted problems with small fishSimple and versatile use in modern rigsNoteAvailability depends on the selected variant. Before purchase, check whether the peg size matches the pellet dimensions and your rig.

Quick OverviewThe Fox Edges Camo Spinner XL D-Aligna is intended for anglers who want a neat, reliable, and effective spinner rig for carp fishing. The pre-shaped D-Aligna improves bait movement and its presentation alongside the hook, which can contribute to better hookholds.DescriptionThis accessory from the Fox Edges series was developed for use with spinner rigs, where the correct bait position is extremely important for natural presentation. The D-section finishes as high as possible next to the Aligna element, further improving the bait’s freedom of movement and the overall effectiveness of the terminal setup. The camo version helps it blend in more discreetly with the lakebed, which is especially useful on pressured waters and in modern carp fishing.FeaturesPre-shaped D-Aligna designed for spinner rigsD-section finishes high next to the Aligna for better bait movementImproves bait presentation alongside the hookXL sizeCamo colour for more discreet terminal tacklePack contains 10 piecesSpecificationsBrandFoxModelEdges Camo Spinner XL D-AlignaColourCamoSizeXLPurposeSpinner rigsPack10 piecesAvailable VariantsFox Edges Camo Spinner D-Aligna XL – camo colour, XL size, for spinner rigs, pack of 10 piecesFox Edges Camo Spinner D-Aligna Standard – camo colour, standard size, for spinner rigs, pack of 10 piecesAdvantagesFaster and easier tying of a neat spinner rigBetter bait movement and presentationDiscreet terminal tackle appearance thanks to the camo colourPractical solution for modern carp rigsFox quality for reliability on the bankNoteThe product is supplied in a pack of 10 pieces. Availability of individual variants may vary depending on stock levels.

Short OverviewThe Fox Edges Camo Spinner D-Aligna is a practical accessory for quick and neat construction of spinner rigs in carp fishing. The pre-shaped braided Dyneema D-Aligna makes it easier to create the D section without complicated knots and is ideal for anglers who want reliable and consistent bait presentation.DescriptionThis Fox accessory is designed for use on spinner-style carp rigs, where precise construction of the D section is important for proper presentation of a boilie or other bait. Thanks to its pre-formed design, the Fox Edges Camo Spinner D-Aligna saves time when tying hooklinks and helps create a neat, functional, and repeatable rig on the bank or at home.FeaturesPre-shaped D-Aligna for use with spinner rigsAllows easy creation of the D section without complicated knotsDesigned for spinner-style carp rigsMade from braided DyneemaPack contains 10 piecesAvailable in Standard and XL sizesTechnologyDyneema fibre construction for durability and reliable rig performanceSpecificationsBrandFoxModelEdges Camo Spinner D-AlignaMaterialBraided DyneemaPurposeSpinner rigs for carp fishingPack Size10 piecesAvailable SizesStandard, XLAvailable VariantsStandardPre-shaped Dyneema Spinner D-Aligna, standard size, 10 pieces per packXLPre-shaped Dyneema Spinner D-Aligna, XL size, 10 pieces per packBenefitsFaster assembly of a finished spinner rigNeat and consistent D section without complex tyingReliable construction for demanding carp fishingA practical choice for anglers who want to save time when preparing hooklinksNoteAvailability of individual sizes may vary depending on stock levels. Before purchase, check whether the selected variant matches your rig and hook size.

Short overviewThe Fox Edges Camo XL D-Aligna is a practical accessory for quick and tidy tying of D-Rig setups in carp fishing. Its pre-formed construction helps achieve better bait presentation and more effective hooking, without the need for complicated tying.DescriptionThis model was developed for anglers who want reliable and simple D-Rig system construction. The Fox Edges Camo XL D-Aligna allows the end of the D to be positioned as close as possible to the Aligna element, giving the bait maximum movement when being ejected from the fish’s mouth. This kind of presentation helps improve separation between the bait and the hook and increases hooking efficiency. It is suitable for modern carp fishing and precise presentations with pop-up or balanced baits.FeaturesPre-formed D-Aligna for tying D-Rig setups without complicated knotsAllows the end of the D to be positioned as close as possible to the Aligna elementGives the bait maximum movement when ejectedHelps create better separation between the bait and the hook for more effective hookingCan be used with a Micro Hook Ring Swivel or Bait Screw system for bait mountingCamo finish for a more discreet presentationXL size10 pieces per packSpecificationsBrandFoxModelEdges Camo XL D-AlignaSizeXLQuantity per pack10 pcsPurposeTying D-Rig setupsFinishCamoCompatibilityMicro Hook Ring Swivel, Bait ScrewEAN5056808527084AdvantagesFaster and easier D-Rig setup tyingNeat and consistent bait presentationImproved separation of the bait from the hookGreater potential for secure and effective fish hookingDiscreet camo colour for wary carpNoteThe product is supplied in a pack of 10 pieces. Availability may vary, and for details on delivery and warranty, please check the store information.

Quick OverviewThe Fox Edges Zig Aligna XL Multi Foam Kit is a complete set for effective zig rig fishing in deep water. It is designed for anglers seeking maximum buoyancy, quick foam bait changes, and a secure presentation without retying the hook.DescriptionThis XL zig kit was developed for carp fishing at greater depths, where buoyancy and precise presentation are key to success. The system allows easy insertion and shaping of the HD foam to the desired size and profile, while a special loop at the rear of the Aligna sleeve securely holds the foam during casting and in the water. Thanks to the softer and more buoyant plastic compared to standard Line Aligna adapters, the bait remains attractive and stable in the feeding zone.FeaturesComplete Zig Aligna XL Multi Foam Kit for zig presentationIncludes 6 Zig Aligna sleeves/adaptersIncludes 3 sticks of Zig Aligna HD foamSupplied with 1 foam insertion toolXL design for very deep water and maximum buoyancyThe foam can be cut and shaped to the desired bait sizeSpecial rear loop holds the foam extremely securelyAllows quick changes of foam colour or size without retying the hookMulti-coloured HD foam included: red, yellow and blackTechnologyZig Aligna system for quick and neat zig presentationHighly buoyant HD foam for making customised hookbaitsSofter and more buoyant Aligna plastic for better presentation compared to standard adaptersSpecificationsBrandFoxModelEdges Zig Aligna XL Multi Foam KitPurposeZig fishing / carp fishingKit contents6 Zig Aligna sleeves, 3 HD foam sticks, 1 insertion toolFoam typeHighly buoyant HD foamFoam coloursRed, yellow and blackSpecial featureXL design for very deep water and maximum buoyancyBait customisationThe foam can be cut and shaped as desiredSystem advantageQuick foam colour or size changes without retying the hookAdvantagesExcellent choice for deep-water fishingSaves time when changing zig baitHolds the foam securely during castingAllows precise adjustment of bait size and shapePractical kit ready to use immediately after openingNoteProduct availability depends on stock levels. For warranty and delivery time information, please check the product details in the store.

Quick OverviewThe Fox Edges Zig Aligna XL Multi Sleeve Kit is a practical kit for creating more effective zig rigs in carp fishing. It is designed for anglers who want a more aggressive hook angle, better bait presentation, and more secure fish hooking in different light and water conditions.DescriptionThis XL Zig Aligna kit was developed for precise zig rig setup when visibility and proper presentation above the bottom or in the mid-water layer are important. The multi-coloured sleeves and HD foam allow you to match the bait colour or visual marker to the conditions on the water, while the Aligna system shape helps create a wider gape and a more effective hook angle. The kit is suitable for carp fishing with a zig approach, especially when you need to quickly change contrast and presentation.FeaturesComplete XL Zig Aligna set in a pack with multiple sleevesContains a total of 6 Zig Aligna sleevesIncludes 3 HD foam sticksIncludes 1 tool for inserting foam into the Aligna loopSleeves and foam come in mixed colours: red, yellow and blackThe colours can be used for matching or contrast depending on light and water colourThe Aligna system shape helps create an aggressive hook angle and a wide presentationThe foam is securely fixed in the shaped loop so it will not come off during the castTechnologyZig Aligna design for a more aggressive hook angle and better hook holdHD foam system for securely holding the foam during castingSpecificationsBrandFoxModelEdges Zig Aligna XL Multi Sleeve KitPurposeZig rigs for carp fishingNumber of sleeves6Number of HD foam sticks3Insertion tool1ColoursRed, yellow and blackPackaging typeMulti-colour kitBenefitsAllows quick and tidy zig rig constructionImproves hook and bait presentationMultiple colours for easier adaptation to water conditionsReduces the chance of the foam coming off during the castPractical kit ready to use immediately after openingNoteProduct availability depends on stock status. Before purchase, check compatibility with the rest of your carp tackle and rig setup.

Short OverviewThe Fox Edges Naturals Running Safety Clip Kit is a complete set for creating a running rig setup intended for carp fishing. It is ideal for anglers who want a neat, safe and effective system with better bite indication and more reliable hooking.DescriptionThis kit from the Fox Edges Naturals series contains everything needed for quickly assembling a running rig setup. This type of system is an alternative to fixed lead setups because it allows freer movement of the rig with reduced friction, which can help provide clearer bite indication and more effective hook hold during the fight. It is especially suitable for carp fishing and for situations when you want reliable terminal tackle with a natural, discreet appearance.FeaturesComplete set for building a running rig setupIncludes Buffer Bead, Run Ring and Speed LinkAllows you to create a running rig without unnecessary frictionAn effective alternative to fixed lead setupsHelps improve transfer of the lead weight when tightening the rigDiscreet Naturals colour for better blending with the bottomTechnologyFox Edges Naturals terminal tackle concept for a natural and unobtrusive end tackle appearanceSpecificationsBrandFoxModelEdges Naturals Running Safety Clip KitPurposeBuilding a running rig setup (running rig)ColourNaturalsKit contentsBuffer Bead, Run Ring, Speed LinkSystem typeRunning rig as an alternative to fixed lead setupsSeriesFox Edges NaturalsAdvantagesQuick and easy assembly of a ready carp rigLess friction in the system for a more natural presentationBetter load transfer can contribute to more secure fish hookingThe components are matched and ready to use from one packA reliable solution for modern carp fishingNoteThe product is supplied as a complete terminal tackle kit for one type of rig. Please check availability before ordering, and manufacturer and store terms apply for warranty details.

Short OverviewThe Fox Edges Camo Running Safety Clip Kit is designed for anglers looking for a safe and effective running rig for carp fishing. This kit provides reliable hook-ups, reduces the chance of the hook being shaken out, and helps minimize lead loss when fishing demanding waters.DescriptionThis Fox rig in the Safety Clip version is designed to act like a bolt-rig system on the take, then switch to a running setup after the fish is hooked. This solution is especially useful on heavily pressured waters, where carp are often cautious and used to ejecting rigs. The Edges Camo finish further helps keep the system discreet on the bottom.FeaturesSafety Clip system that works like a bolt-rig on the take, then switches to a running rig after hookingThe clip separates from the insert after hooking, but remains on the lineReduces the chance of the fish using the lead weight to throw the hookHelps reduce lead loss because the safety clip is not fixed in placeDesigned for demanding and frequently fished watersEdges Camo camouflage colour for a more discreet presentationSupplied as a complete kit ready to assemble the rigTechnologyUnique plug insert positioned inside the clip body for optimal retention and effective hookingKwik Change Swivel is secured inside the rubberised plug using a T pinTail Rubber keeps the lead in place until the moment of hookingBuffer Bead, Run Ring and Speed Link allow a smooth running system with minimal frictionSpecificationsBrandFoxModelEdges Camo Running Safety Clip KitColourEdges CamoPackage weight15 gQuantity per pack5 kitsPackage contents5 Safety Clips, Tail Rubbers, Plugs, T pins, Kwik Change Swivels, Buffer Bead, Run Ring and Speed LinkIntended useCarp fishing, running rigAvailable VariantsFox EDGES Camo Running Safety Clip Kit (5 pcs)AdvantagesA safer and more intelligently designed carp rigBetter hooking efficiency on cautious fishLess chance of the hook being shaken out during the fightPractical kit with the necessary components in one packAn excellent solution for modern running and semi-fixed carp rigsNoteProduct availability depends on stock status. The product comes in original Fox packaging according to the manufacturer's specification.

Short overviewFox Edges Dumpy Lead is a compact carp lead designed for precise casting and reliable bottom holding. It is an ideal choice for anglers looking for a stable rig presentation in carp fishing.DescriptionThis lead from the Fox Edges series features a chunky, compact shape that helps with rig control and effective bait presentation. It is suitable for various carp fishing situations, especially when you want a reliable lead for casting, setting up the rig, and fishing over different types of bottom.FeaturesCompact Dumpy shape for stable positioning on the bottomSuitable for carp fishing and various terminal rigsProvides precise casting and good rig controlAvailable in multiple weights to match conditions on the waterFox quality from the Edges tackle seriesSpecificationsBrandFoxModelEdges Dumpy LeadPurposecarp fishingProduct typefishing leadShapeDumpyAvailable variantsVariantWeight2oz / 56g56 g2.5oz / 70g70 g3oz / 85g85 g3.5oz / 100g100 g4oz / 113g113 gAdvantagesEasy selection of the appropriate weight according to casting distance and fishing conditionsStable rig presentation on the bottomA reliable choice for modern carp fishingCompact design for versatile useNoteAvailability of certain weights may vary. Please check stock status before purchase and select your desired variant.

Quick OverviewFox Edges Distance Lead is a specialised lead for long and precise casts in carp fishing. Thanks to its aerodynamic, front-loaded shape and matte camo finish, it is an ideal choice for anglers seeking maximum distance, stable flight, and discreet presentation on the bottom.DescriptionThis lead was developed for situations where it is necessary to achieve great distance without losing control during the cast. The improved profile reduces air resistance, while the forward-shifted centre of gravity enables a more stable and accurate flight path. Fox Edges Distance Lead is particularly suitable for carp fishing on large lakes, reservoirs, and other waters where long casts are key to success.FeaturesIdeal lead for long-distance castingImproved aerodynamic profileFront-loaded centre of gravity for stable and accurate flightOptimised for maximum casting distanceReduced air resistance during the castLarge swivel with eyeMatte camo finish with low reflectionTechnologyAerodynamic distance shape with the centre of gravity shifted forwardCamo, anti-reflective outer coatingSpecificationsProductFox Edges Distance LeadPurposeLong-distance casting in carp fishingMaterialLead with a camo, anti-reflective coatingShapeAerodynamic distance shape with front loadingCentre of gravityShifted forwardSwivelLarge swivel with eyeFinishMatte, low-reflective camoAvailable Variants3 oz / 85 g3.5 oz / 100 g4 oz / 113 g4.5 oz / 127 g5 oz / 142 gBenefitsAllows greater casting distances with better controlStable flight path contributes to more precise rig placementThe camo, matte surface helps provide more discreet presentationSuitable for fishing on large waters and demanding spotsWide weight range for adapting to different fishing conditionsNoteAvailability of certain weights may vary depending on stock levels. Before purchase, check whether the selected weight matches your rod, rig, and water conditions.

Quick overviewFox Edges Naturals 50lb Leadcore Leaders 3pcs are ready-made leadcore leaders designed for carp fishing and building reliable terminal rigs. Thanks to the 50 lb (22,68 kg) breaking strain, discreet Naturals colour, and factory-prepared components, they are ideal for anglers who want to assemble a rig quickly, neatly, and securely.DescriptionThese Fox leadcore leaders are made for situations where it is important for the terminal section of the rig to hug the bottom well and remain as unobtrusive as possible. The length of 75 cm per piece is suitable for various carp rigs, while the included size 7 Kwik Change swivel and Micro Anti-Tangle sleeves make it easier to change leaders quickly and achieve a neat rig presentation. They are compatible with Fox EDGES Safety Lead Clips in size 7.FeaturesThe pack contains 3 ready-made leadcore leadersLength of each leader: 75 cmMade from Edges Naturals 50lb leadcore materialBreaking strain: 50 lb (22,68 kg)Supplied with a size 7 Kwik Change swivelIncludes 3 Micro Anti-Tangle sleevesCompatible with Fox EDGES Safety Lead Clips size 7Discreet dark green Naturals colourRecyclable cardboard packagingTechnologyNaturals colour for low visibility and more natural blending with the bottomSpecificationsProduct nameFox Edges Naturals 50lb Leadcore Leaders 3pcsBrandFoxProduct typeLeadcore leadersQuantity in pack3 pcsLength75 cm per leaderMaterialEdges Naturals 50lb LeadcoreBreaking strain50 lb (22,68 kg)ColourNaturals, dark greenSwivelKwik Change Swivel, size 7Additional3 Micro Anti-Tangle sleevesCompatibilityFox EDGES Safety Lead Clips, size 7PackagingRecyclable cardboardAdvantagesSaves time as it comes ready to useHelps the terminal section of the rig follow the bottom betterThe discreet colour reduces visibility against the lakebedSimple and quick leader changes thanks to the Kwik Change systemA reliable solution for modern carp rigsNoteThe product is supplied in a pack of 3 pieces. Availability depends on stock status, and for additional warranty information please check the store terms.

Quick OverviewFox Edges Naturals 50lb Leadcore Lead Clip Leaders 3pcs are ready-made leadcore leaders for carp fishing, designed for fast and reliable construction of the terminal rig. Thanks to the fast-sinking soft lead core, natural dark green colour, and included components, they are ideal for discreet presentation of the setup on the bottom.DescriptionThese pre-assembled lead clip leaders from the Fox Edges Naturals series are designed for anglers who want a neat, efficient, and reliable rig without the need to tie additional components. They are suitable for carp fishing on lakes and other stillwaters, especially when good bottom contouring, fast sinking, and reduced tangling during casting and bait presentation are important.Features3 ready-made leaders, 75 cm longMade from Edges Naturals 50 lb leadcore materialFast-sinking soft lead core for better bottom huggingBraided, supple outer coatingHigh abrasion resistanceIncludes Power Grip Tail RubbersIncludes size 7 Safety Lead ClipsIncludes Micro Anti Tangle SleevesIncludes size 7 Kwik Change swivelsComplete lead clip setup ready to useNatural, unobtrusive dark green colourTechnologyFox Edges Naturals rig components system for a more natural and discreet presentationPower Grip system for secure grip of the tail rubber componentKwik Change Swivel system for quick changing of leaders and terminal componentsSpecificationsBrandFoxProduct NameEdges Naturals 50lb Leadcore Lead Clip Leaders 3pcsProduct TypeLeadcore leaders with lead clip setupBreaking Strain50 lb (22,7 kg)Length75 cmPack Quantity3 leadersMaterialEdges Naturals 50lb leadcore with a braided, supple coating and soft lead coreColourDark green (Naturals)EAN5056212175505Reference CodeCAC852AdvantagesSaves time as it comes pre-assembled and ready for fishingExcellent choice for a neat and secure carp terminal rigSinks quickly and follows the bottom contour for a more discreet presentationAbrasion resistance contributes to reliability on demanding terrainFox components ensure compatibility and ease of useNoteThe pack contains 3 ready-made leaders. Availability may vary, and for details on warranty and delivery, please check the store information.

Quick OverviewFox Edges Naturals Submerge Lead Clip Leaders 3pcs are ready-made leaders for quick and tidy lead clip rig assembly in carp fishing. They are made from lead-free Submerge Naturals material, 75 cm in length, and come pre-assembled for reliable and discreet presentation on the bottom.DescriptionThese Fox leaders are intended for anglers who want to assemble an effective lead clip rig simply, quickly, and securely without additional component assembly. Thanks to the Naturals dark green colour and soft material that hugs the bottom well, they are ideal for carp fishing on different types of terrain, especially when rig concealment and reduced tangling are important.FeaturesThe pack contains 3 pre-assembled leaders.Each leader is 75 cm long.Made from lead-free Submerge Naturals material.Ideal for lead clip rigs with Fox Edges Naturals components.Supplied with Power Grip Tail Rubbers.Fitted with Size 7 Safety Lead Clips.Include Micro Anti Tangle Sleeves to reduce tangles.Include Size 7 Kwik Change Swivels.Packaging made from recyclable cardboard.TechnologySubmerge Naturals lead-free leader material for better bottom-hugging and more discreet presentation.Power Grip Tail Rubbers for secure lead retention in the lead clip system.Micro Anti Tangle Sleeves to reduce tangling during casting and presentation.Kwik Change Swivels for quick and easy leader or rig changes.SpecificationsProduct nameFox Edges Naturals Submerge Lead Clip Leaders 3pcsBrandFoxLength75 cm per leaderMaterialSubmerge Naturals lead-free leaderColourNaturals (dark green)Pack quantity3 pcsIncluded componentsPower Grip Tail Rubbers, Size 7 Safety Lead Clips, Micro Anti Tangle Sleeves, Size 7 Kwik Change SwivelsPackagingRecyclable cardboardAvailable Variants30lbBreaking strain 30 lb (13,6 kg)40lbBreaking strain 40 lb (18,1 kg)AdvantagesReady to use straight out of the pack.Save time when building the terminal rig.The discreet dark green colour blends in better with the bottom.The lead-free material provides a more natural lay along the lakebed.Quality Fox Edges components increase rig reliability.NoteAvailability of individual variants depends on stock levels. The product comes in original Fox packaging.

Quick OverviewFox Naturals Submerge Leaders 3pcs are ready-made leaders for carp fishing, intended for anglers looking for a neat and reliable helicopter setup. They sink quickly, follow the contours of the lakebed, and thanks to the dark green Naturals colour, remain discreet on the bottom.DescriptionThese pre-assembled leaders are made from lead-free Submerge Naturals material and fitted with Edges Naturals components for ideal helicopter rig arrangement. They are suitable for situations where good bottom presentation, fast sinking, and reduced rig visibility are important during carp fishing.FeaturesPre-assembled Submerge Naturals lead-free leadersDesigned for an ideal helicopter setupSink quickly and follow the contours of the bottomDiscreet and subtle Naturals dark green colourPack contains 3 leaders, each 75 cm longSupplied with components: 3 x Heli Buffer Sleeves, 3 x Tapered Bore Beads, 3 x 0,5 mm Leader Silicone, 3 x size 7 Heli Swivel, 3 x Micro Speed Links, 3 x Micro Anti Tangle SleevesSupplied in recyclable cardboard packagingTechnologySubmerge Naturals lead-free leader materialEdges Naturals components for a neat and effective setupSpecificationsProduct nameFox Naturals Submerge Leaders 3pcsProduct typeReady-made leaders for helicopter setupLength75 cm per leaderQuantity per pack3 pcsMaterialSubmerge Naturals lead-free leader materialColourNaturals dark greenComponents3 x Heli Buffer Sleeves, 3 x Tapered Bore Beads, 3 x 0,5 mm Leader Silicone, 3 x size 7 Heli Swivel, 3 x Micro Speed Links, 3 x Micro Anti Tangle SleevesEAN5056212175451Available VariantsVariantBreaking strain30lb30 lb (13,61 kg)40lb40 lb (18,14 kg)AdvantagesSaves time thanks to ready-made, pre-assembled leadersImproves rig presentation on the bottomSinks quickly and reduces the chance of the leader lifting above the bottomDiscreet appearance helps when targeting cautious carpHigh-quality Fox components for reliable performance on the bankNoteAvailability of individual variants depends on stock levels. We supply the product in original Fox packaging under the applicable sales terms and manufacturer's warranty conditions.

Quick OverviewFox Edges Camo 50lb Leadcore Lead Clip Leaders are ready-made carp leaders designed for anglers looking for a reliable, discreet, and quick-to-use setup. They are made from highly durable sinking leadcore material and are ideal for carp fishing on demanding terrain.DescriptionThese ready-made leaders from the Fox Edges series are designed for simple and secure assembly of a terminal rig without any additional tying. The leadcore construction with a soft lead inner core allows the leader to sit tight to the bottom, while the included lead clip components and terminal accessories provide a neat and functional setup for various carp fishing situations, including helicopter rigs.FeaturesThe pack contains 3 ready-made leaders, 75 cm in lengthMade from Fox Edges Camo 50 lb leadcore materialIncludes Power Grip Tail RubbersIncludes size 7 Safety Lead ClipsIncludes Micro Anti Tangle SleevesIncludes size 7 Kwik Change swivelsReady for helicopter rig setupsRecycled cardboard packagingTechnologyLeadcore construction with a soft lead inner core for better bottom adhesionSinking, abrasion-resistant leader for fishing over demanding substratesEnhanced camo colour pattern for a more discreet presentationSpecificationsBrandFoxModelEdges Camo 50lb Leadcore Lead Clip LeadersBreaking Strain50 lb (22,68 kg)MaterialFox Edges Camo 50lb leadcore, braided leader with a soft lead inner coreColourCamo / Trans KhakiLength75 cmQuantity per Pack3 pcsCompatibilityLead clip and helicopter rigsIncluded ComponentsPower Grip Tail Rubbers, size 7 Safety Lead Clips, Micro Anti Tangle Sleeves, size 7 Kwik Change swivelsPackagingRecycled cardboardAdvantagesSaves time because the rig is pre-preparedExcellent camouflage and close bottom-hugging presentationHigh abrasion resistance for fishing near snags and on hard bottomsA practical solution for quick terminal rig replacementQuality Fox components ensure reliable rig performanceNoteThe product is supplied as a pack of 3 ready-made leaders. Availability may vary, and for details on warranty and delivery, please check the store information.