This is the out turned eye version of The Super Wide Gape which makes it perfect for Chod, Hinged and Flurocarbon D-rigs. This hook was born out of many long discussions with our consultants and other highly experienced anglers. The idea that keeping the gap as wide as possible when constructing a rig will result in more hooked carp is highly favored among many anglers. As such we set about designing a hook with a gape increased even further than our hugely popular Wide Gape and Stiff Rig hooks. Enter the "Super Wide Gape", a hook with a long wide sweeping bend, super sharp beaked point and a gape wider than any hook we have used previously. In tests it has proven that even on the simplest of rigs, this hook is an unbelievable fish catcher. With such a wide gape once the fish has sucked the rig in, upon ejection there is so much hook point exposed that the chances of it catching hold are vastly increased, allowing you to worry less about rig mechanics and more about getting the rig on the right spot.
Super wide gaped version of the Wide Gape beaked point Edges hook with an out-turned eye
Increased gape leaves point more exposed to penetrate in the fish's mouth
Perfect for Chod and Hinge stiff rigs and fluorocarbon D-Rigs
Beaked point helps reduce hook pulls and makes it perfect for fishing bottom baits on hard gravel
Super sharp
Arma Point technology
20 degree out-turned eye
Non-reflective dark coating
Super strong yet lightweight XC81 Vanadium forged steel construction
Available in sizes: 6, 5, 4 and 2
The Wide Gape Long Shank has been developed with the intention of creating the ultimate modern carp hook, combining key elements from the greatest fish catching patterns, for use on the most popular rigs around today. We started with a long shank hook, renowned for its hooking properties, we added to that a slight, but sweeping curve, this ensures the hook will turn in an instant once inside the carps mouth, putting it in the prefect hooking position. A wide gape was also required, to give the point as much chance of catching hold as possible. Finally, a beaked point to ensure that once hooked the hook remains in place and the chances of it pulling are reduced. Never have all these elements been combined in a carp hook and the result is deadly! These hooks are perfectly suited to Ronnie/Spinner rig presentations alongside all manner of different bottom bait and popup rigs.
A unique wide gape hook with a lengthened shank
Completely unique pattern/design
Combining "critical elements" of some of the very best hooks
A long shank, a wide gape and a beaked point
The long shank encourages the hook to turn in the carps mouth
The long shank features a slight curvature adding to the speed at which the hook turns
The wide gape ensures that the point is as free as possible to catch hold
The beaked point helps the hook remain in place during battle
Beaked point also makes it perfect for fishing bottom baits on hard gravel
Perfect for Ronnie/Spinner rigs and great for bottom bait and alternative pop-up presentations
Super sharp
Arma Point technology
Slightly in-turned eye to further exaggerate the sweeping shank
Non-reflective dark coating
Increased wire gauge
Super strong yet lightweight XC81 Vanadium forged steel construction
Available in sizes 7, 6, 5 and 4
Thanks to the infrared technology, the heat produced by the burner is of a very high temperature, while consuming less gas than an ordinary burner. In short, you will boil a pot of water faster and use less gas than before, and you will save both time and money!
Infrared technology provides stronger and more concentrated heat
Faster boiling time and lower costs
When used in combination with Power Boil pots and up to 30% higher energy efficiency
Stable body with 3 folding legs
Long hose for connecting to the gas tank
It also includes an additional stand for standard dishes
Aluminum and stainless steel construction
1760w
The dishes conduct heat from the Infrared burner in a more energy-efficient way, boil water faster, which will save you both time and money.
Solid anodized aluminum pot for boiling water/cooking food
It comes with a heat exchange system that sits directly on the Fox Infrared burner for maximum efficiency
Neoprene cover in Fox camo pattern for improved insulation that can be left on the pan when in use
By folding the handle of the container, the lid is fixed and makes it easier to store and transport
Available in 0.65l and 1.25l volumes
You can store a burner and gas tank of 230 g or one larger tank of 500 g in a larger container of 1.25 l.
In a smaller container of 0.65 l, you can store a burner or one gas tank of 230 g.
Black/Camo Raglan style pullover Hoody
Fox Camo print logo across the chest
Kangaroo pocket
Camo pocket trim
Hood pull cord adjusters
Elasticated hem and cuffs
50% Polyester, 50% Cotton
Available in sizes S, M, L, XL, 2XL, 3XL
Model Height: 5ft 10in/179cm
Model Chest: 40in/101cm
Model is wearing: Size M
The Edges Crimping Pliers are specially designed to work with Edges crimps that form an extended crimp that allows for optimal position of the loop in the crimp. The pliers taper towards the tip to form the perfect extension for any size crimp while at the same time ensuring a firm hold. Pliers have cutters and a firm grip making them useful for many aspects of pre-tie making.
Frontier XD Over Wrap
Full overwrap in khaki VenTec fabric
Reduces condensation
Improves insulation for more consistent temperature control
Three door options (solid, clear and camo mesh)
Mozzy windows either side of the door.
Storm cords stored inside fabric pockets for extra security in extreme weather
Overwrap extending ribs have storm pole attachments for extra stability.
100% Polyester
Weight - 5.2 kg
Tied using Reflex Camo supple braid
Perfect ready-tied rig for fishing alongside an inline lead inside a solid PVA bag
Two rigs supplied per packet
Each rig features: 1 x Trans Khaki Micro Anti-Tangle Sleeve, 1 x Trans Khaki Short Line Aligna and 1 x small length Trans Khaki Hook Silicone and 1 x ultra-sharp Arma Point® Wide Gape Beaked hook
Size 7 Kwik Change Swivel x2 also supplied
Comes with free Hair Extending Boilie Props
Can be attached to Edges ready-tied leaders
Kratki pregled Specijalno dizajnirana za Fox R Series Large Chair Izdržljiva, vodoodbojna tkanina i ojačano dno Podstavljen, podesiv remen za rame i ručke za nošenje Robusni dvostruki zatvarači za lak pristup Uvod Fox R Series Large Chair Bag osigurava siguran i uredan prijevoz vaše velike ribolovne stolice. Torba štiti od kiše, blata i ogrebotina, a promišljeni raspored olakšava pakiranje i raspakiranje na vodi. Značajke Kompatibilnost: namijenjena modelu R Series Large Chair Vodoodbojna završna obrada i ojačani šavovi Udobne transportne opcije: remen za rame + bočne ručke Praktični džepovi za sitan pribor i dodatke Nisko-profilni dizajn za uredno slaganje u vozilu ili kolicima Detalji Unutrašnjost dizajnirana da smanji trenje i trošenje presvlaka stolice Stabilno, lako čistivo dno otporno na vlagu Neutralna zelena/khaki boja koja se uklapa u teren Varijante Šifra proizvoda: CLU449 — R Series Large Chair Bag Specifikacije Brand Fox Model R Series Large Chair Bag Šifra proizvoda CLU449 Kompatibilnost Fox R Series Large Chair (velika) Materijal Izdržljiva poliesterska tkanina, vodoodbojna završna obrada Boja Zelena/khaki Zatvarači Robusni dvostruki zatvarači Nosači Podstavljen remen za rame i ručke Namjena Zaštita i prijevoz stolice Prednosti Produžuje vijek trajanja stolice štiteći je od vremenskih utjecaja Ubrzava pakiranje zahvaljujući širokom otvoru i organizaciji Udobnije nošenje na dužim relacijama Napomena Stolica na fotografijama nije uključena u cijenu. Boja i detalji mogu se neznatno razlikovati ovisno o seriji proizvodnje.
For R3 beds and other XL beds together with a light sleeping bag and pillow
Dimensions: 85 x 85 x 30 cm
Double, solid zippers
Detachable, padded carrying strap
Reinforced EVA carrying handles
Treated 100% polyester of 400 denier
Outer material 100% polyester, filling 100% polyethylene, lining 100% polyester
For Super Delux Recliner chair R3 chairs and other large chairs
Dimensions: 70 x 80 x 20 cm
Unique Fox camouflage pattern
Double, solid zippers
Detachable, padded carrying strap
Reinforced EVA carrying handles
Treated 100% polyester of 500 denier
Outer material 100% polyester, filling 100% polyethylene, lining 100% polyester
For Flatliner systems, R2 and other large beds
Dimensions: 95 x 117 x 33 cm
Unique Fox camouflage pattern
Double, solid zippers
Detachable, padded carrying strap
Reinforced EVA carrying handles
Treated 100% polyester of 500 denier
Outer material 100% polyester, filling 100% polyethylene, lining 100% polyester
Edges Link Lead Materials are designed for use with Edges Crimps to provide clean and neatly crimped lead leads. It is ideal for rigid leads such as Hinge, Ronnie/Spinner and various Combi leads. It is available in two diameters/strengths which sizes are complemented by the corresponding sizes of Edges crimps eg the 25lb Link is suitable for small crimps and the 35lb Link is suitable for medium crimps. In this way, we will get the strongest pre-tie, eliminate problems with knots and very easily get pre-ties that are always the right length.
Monofilament material for pre-ties
Trans Khaki color
Designed for use with Edges crimps
For the perfect rigid "boom" part of the apron
Ideal for Hinge, Ronnie/Spinner and Combi pre-links
Available in two sizes of 0.53mm/25lb and 0.64mm/35lb
It comes on spools of 20 m
Edges Link lead materials are designed specifically to be combined with Edges crimps to produce clean and neatly crimped leads. It is ideal for rigid leads such as Hinge, Ronnie/Spinner and various Combi leads. It is available in two diameters/strengths which sizes are complemented by the corresponding sizes of Edges crimps eg the 25lb Link is suitable for small crimps and the 35lb Link is suitable for medium crimps. In this way, we will get the strongest pre-tie, eliminate problems with knots and very easily get pre-ties that are always the right length.
Fluorocarbon material for pre-ties
Transparent Illusion Fluorocarbon
Link Mono is a Trans Khaki color
Designed for use with Edges crimps
For the perfect rigid "boom" part of the apron
Ideal for Hinge, Ronnie/Spinner and Combi pre-links
Available in two sizes of 0.53mm/25lb and 0.64mm/35lb.
It comes on spools of 20 m
Reversible jacket with Fox camo on one side and burnt orange marl on the reverse
Perfect for either bank wear or everyday casual wear
100% Polyester thermal filling for great insulation
Adjustable drawcord hem
Zipped pockets on both sides
Main: 100% Polyester
Lining: 94% Polyester, 6% Elastane
Model height: 5ft 10ins, 178cm
Model chest: 40ins, 101.6cm
Model wears: L
Introducing an updated and improved version of the incredible Horizon X5 rods, the X5-S rods use cutting edge carbon technology for a stronger, lighter, thinner and more powerful blank. Using several multidirectional layers of thinner carbon cloth with nanofiber technology that are electro bonded together during the curing process. All push over joints feature additional carbon reinforcement. The X5-S blanks have superior recovery to improve distance and accuracy in casting while still retaining a superb playing action. Now with a stylish Gunsmoke finish these rods are in a class of their own!
Ultra high modulus carbon
Multidirectional Nanofibres
Interlaminar resin
1k carbon wrap
Reinforced carbon power joints
50mm – 16mm anti-tangle K-Series Gunsmoke guides
Fuji 18mm DPS gunsmoke reel seat
Updated, understated cosmetics