Novosti

Short OverviewThe Cralusso Special Round Feeder with Wire Loop is a round feeder designed for precise and reliable baiting in feeder fishing. Thanks to its sturdy wire loop and robust construction, it is an excellent choice for anglers looking for easy rigging, stable performance, and long-lasting durability on the water.DescriptionThis Cralusso feeder has been developed for feeder fishing on rivers and lakes, where controlled groundbait release and secure rig presentation are important. The round shape contributes to proper performance during casting and on the bottom, while the wire loop allows quick and practical attachment in various feeder setups.FeaturesRound feeder with wire loop10 g weight for natural presentation and precise baitingDimensions 45 x 47 mmSuitable for feeder fishing in flowing and still watersStrong and durable construction for long-term usePack of 2 pieces, depending on the variantSpecificationsBrandCralussoModelSpecial Round Feeder with Wire LoopTypeRound feederWeight10 gDimensions45 x 47 mmMountingWire loopPurposeFeeder fishingApplicationRiver and lakeAvailable VariantsMix10 g, 2-3 pcsXL10 g, 2 pcsXXL10 g, 2 pcsXXXL10 g, 2 pcsBenefitsQuick and easy rigging thanks to the wire loopReliable bait retention and controlled releaseDurable design suitable for frequent usePractical size selection according to water conditions and the amount of groundbaitNoteAvailability of individual variants may vary depending on stock levels. We recommend choosing the size according to fishing conditions and the type of groundbait you use.

Quick overviewThe Preston Innovations Inline Pellet Feeder is an inline pellet feeder designed for precise feeder fishing on commercial waters, around islands, and on sloping banks. Its flat profile and the combination of plastic and lead ensure stable landing, accurate bait presentation, and reliable performance with a short hooklength.DescriptionThis feeder was developed for fishing with micro pellets and softened 4 mm pellets, as well as fine feed particles. The ICS In-Line construction allows quick feeder changes without complicating the rig, while the line-through design offers the option of using it as a running or semi-fixed system. It is especially effective when used with a short 10 cm hooklength, as it presents the bait precisely in the feed zone.FeaturesInline pellet feeder with a flat profile for a stable position on the bottomSuitable for micro pellets, softened 4 mm pellets, and fine feed particlesCombination of plastic and lead for precise casting and correct orientation on the dropAn excellent choice for fishing around islands, margins, and sloping banksRecommended for use with a short 10 cm hooklength for maximum effectivenessQuick adaptation to fishing conditions through multiple sizes and weightsTechnologyICS In-Line design for quick feeder changesLine-through construction for running or semi-fixed riggingSpecificationsProduct typeInline pellet feederConstructionICS In-Line / line-throughPurposeFeeder fishing with pellets and fine feed particlesRecommended feedMicro pellets and softened 4 mm pelletsRecommended hooklength10 cmMaterialPlastic and leadDesign advantagePrecise casting and correct orientation when dropping to the bottomBody sizesThree body sizesRiggingRunning or semi-fixed systemAvailable variantsSmall - 20 gSmaller body, for micro and softened 4 mm pelletsSmall - 30 gSmaller body, for micro and softened 4 mm pelletsLarge - 25 gLarger body, for micro and softened 4 mm pelletsLarge - 40 gLarger body, for micro and softened 4 mm pelletsXL 40GXL version for a larger amount of feed and stable presentationXL 50GXL version for a larger amount of feed and stable presentationAdvantagesVery good stability on sloping and demanding positionsPrecise bait presentation within the feed areaQuick feeder changes thanks to the ICS systemWide choice of sizes and weights for different distances and fishing conditionsAn excellent choice for targeting carp, F1, and other fish on commercial watersNoteAvailability of individual variants may vary depending on stock levels. Before fishing, check whether the rig complies with the rules of the water you are fishing.

Quick OverviewThe Matrix Open Alloy Feeder Inter is an open feeder designed for precise feeding and stable casting. It is an excellent choice for anglers looking for quick groundbait application, better weight distribution, and easy system changes during feeder fishing.DescriptionThis Matrix feeder has been developed for efficient and clean groundbait loading, with an emphasis on casting accuracy. The forward-weighted design helps stability in flight, while the raised front section protects the feeder contents from spilling out too early on impact with the water. It is suitable for various feeder situations, from shorter to longer casts, when controlled bait presentation is needed.FeaturesOpen design for quick and easy groundbait applicationFully injected alloy construction for better weight distributionForward-weighted for greater accuracy and stability when castingRaised front edge reduces premature release of contents on impact with the waterInterchangeable system for quick adaptation on the bankSupplied with an inline stem attachment and quick-change feeder bead accessoryTechnologyWeight forward design for improved casting accuracyInterchangeable system for quick feeder changes without complicated setupInline stem system for neat and practical riggingSpecificationsBrandMatrixModelOpen Alloy Feeder InterTypeOpen feederMaterialFully injected alloySystemInterchangeableAdditionalInline stem and quick-change feeder beadDesignForward-weightedPurposeQuick groundbait application and precise feeder castingAvailable VariantsVariantSpecification20 gIntermediate size30 gIntermediate sizeAdvantagesAllows quick loading and effective groundbait presentationImproves control and accuracy on every castReduces feeder content loss on contact with the waterPractical interchangeable system saves time during fishingReliable construction for frequent and intensive useNoteAvailability of individual weights may vary depending on stock status. It is recommended to choose the weight according to casting distance and water conditions.

Quick OverviewPreston Distance Cage Feeders are cage feeders designed for precise fishing at longer distances. The bottom-mounted lead improves flight stability and casting accuracy, while the smooth interior allows clean and fast release of groundbait. They are an excellent choice for feeder fishing on lakes, canals, and other waters where long casts are important.DescriptionThese feeders were developed for anglers seeking reliable bait presentation and better control when casting, especially in crosswind conditions. The special lead shape and cage construction help provide stable flight, while the snag-free interior reduces groundbait retention and ensures neat emptying on the baited spot. They are suitable for long-range feeder fishing with groundbait, pellets, and similar baits.FeaturesBottom-mounted lead for better stability and greater casting accuracyMore efficient casting in crosswind conditionsSmooth cage interior for clean groundbait releaseFeeder shape reduces the chance of snaggingSuitable for long-range feeder fishing on stillwaters and slower-flowing riversTechnologyBottom mounted lead construction for greater casting accuracyUnique lead shape for more stable flight and better feeder performanceSmooth cage interior for unobstructed bait releaseSnag-reducing design for fewer snags during fishing and retrievalSpecificationsBrandPreston InnovationsProduct NameDistance Cage FeedersTypeCage feeder for long-range fishingModel weight range20 g – 70 gConstructionMetal cage with a smooth interiorLeadBottom-mounted, specially shaped leadPurposePrecise and long casts, including fishing in crosswind conditionsPerformance advantageReduced chance of snagging and neat groundbait emptyingAvailable VariantsMedium30 gLarge40 gAdvantagesIncreases accuracy at longer distancesBetter performance in windy conditionsFaster and cleaner groundbait release on the bottomFewer snags during fishing and when retrieving the rigA practical choice for anglers looking for a reliable long-range feederNoteAvailability depends on the selected variant. Before purchasing, check which weight best suits the casting distance, amount of groundbait, and water conditions.

Short OverviewPreston Innovations Hexmesh Plastic Bullet Feeders are plastic feeder cages developed for long and accurate casting and controlled bait release. They are an excellent choice for anglers who want stable flight, versatile bait use, and reliable performance on rivers, canals, and stillwaters.DescriptionThanks to the closed plastic mesh construction and precisely positioned hexagonal openings, these bullet feeders allow even washout of the contents and better bait presentation. The bullet weight at the front improves aerodynamics and stability in flight, making them an excellent solution for feeder fishing at longer distances and in conditions where controlled release of groundbait and baits such as damp mixes, maggots, and pellets is needed.FeaturesPlastic mesh construction for wide use with different baits and groundbaitsBullet shape for longer and more accurate castingControlled content release thanks to the hexagonal openingsFixed feeder typeCorrosion-free constructionLightweight and durable designSuitable for rivers, canals, and still watersTechnologyHexmesh plastic designPrecision placed hexagon holesSpecificationsBrandPreston InnovationsModelHexmesh Plastic Bullet FeedersMaterialTransparent mesh polymer / plastic mesh constructionTypeBullet feederSystemFixed feederPurposeFeeder fishingWatersRivers, canals, stillwatersKey featurePrecision hexagonal openings for controlled groundbait releaseFront sectionBullet weight for casting distance and stabilityConstructionClosed plastic mesh design without rustingBait compatibilityGroundbait, maggots, chopped worms, pellets, and other feeder mixesAvailable VariantsSmall 20 gSmall 30 gSmall 40 gSmall 50 gMedium 20 gMedium 30 gMedium 40 gMedium 50 gMedium 60 gLarge 20 gLarge 30 gLarge 40 gLarge 50 gLarge 60 gBenefitsExcellent stability and accuracy on long castsEven groundbait release for better presentationGreater corrosion resistance compared to classic metal feedersVersatile use on different types of waterSuitable for anglers who want reliable feeder tackle for multiple situationsNoteAvailability of certain sizes and weights may vary. The product is supplied according to the selected variant, with a standard warranty against manufacturing defects.

Quick overviewThe Avid Carp Method Feeder in a pack of 2 is designed for anglers looking for precise feed and bait presentation in method feeder fishing. Thanks to its aerodynamic shape, weighted nose, and Quick-Change system, it is an excellent choice for carp fishing on commercial and natural waters.DescriptionThis flatbed method feeder allows you to form a compact parcel of groundbait or pellets with the hookbait in the centre, which is especially effective when targeting carp on the bottom. The low-profile design and discreet, earthy finish help the feeder sit naturally on the lakebed, while the lockable insert ensures a secure setup and easy changing of weight or size without complicating the rig.FeaturesPack contains 2 method feedersQuick-Change design for fast replacementLockable insert for secure and reliable setupAerodynamic shape for long and accurate castingExtra weighted nose for better stability in flightSubtle flatbed design for unobtrusive bottom presentationSuitable for pellets and method mixesCompatible with Avid Method Moulds in the corresponding sizeSpecificationsBrandAvid CarpTypeFlatbed Method FeederPack2 pcsColourDiscreet, designed to blend with different types of bottomDesignFlatbed, low profileShapeAerodynamicWeightingExtra weighted noseQuick-ChangeYesLockable insertYesCompatibilitySmall with Small Avid Method Mould, Large with Large Avid Method MouldPurposeMethod feeder and carp fishingAvailable variants1.5 oz (42,5 g)2.5 ozAdvantagesQuick feeder changes without unnecessary loss of time on the bankVery good casting accuracy thanks to the aerodynamic bodyStable and discreet bait presentation on the bottomReliable compatibility with Avid Method MouldsAn excellent choice for targeted carp fishing with the method techniqueNoteThe pack contains 2 feeders. Moulds and other additional accessories are sold separately, and variant availability depends on stock levels.

Quick OverviewPreston Bullet Feeders are wire feeder cages designed for long and accurate casting. The robust stainless steel wire construction and proven bullet shape make them an excellent choice for anglers looking for reliability on lakes, canals, and rivers.DescriptionThese cage feeders have been developed for feeder fishing at greater distances, where stable flight, accuracy, and durability are key. The bullet shape helps with precise casting, while the open wire construction allows efficient and controlled release of groundbait in the feeding zone. They are suitable for a wide range of feeder techniques and for fishing in still and flowing waters.FeaturesWire cage feeder for long-distance castingMade from stainless steel wire for long-lasting useBullet shape for stable flight and improved accuracyFast and even groundbait releaseRobust construction designed for frequent long-range castingAvailable in four body sizes: Micro, Small, Medium and LargeWeight range from 20 g to 70 g for different fishing conditionsTechnologyBullet design for improved aerodynamics and stability during castingConstruction made to withstand frequent and demanding long-distance castingSpecificationsBrandPreston InnovationsProduct NamePreston Bullet FeedersTypeWire cage feederMaterialStainless steel wirePurposeLong and accurate castingBody SizesMicro, Small, Medium, LargeWeights20 g, 30 g, 40 g, 50 g, 60 g, 70 gApplicationFeeder fishing on lakes, canals, and riversAvailable VariantsPreston Bullet Feeder Micro 20gPreston Bullet Feeder Micro 30gPreston Bullet Feeder Micro 40gPreston Bullet Feeder Small 20gPreston Bullet Feeder Small 30gPreston Bullet Feeder Small 40gPreston Bullet Feeder Small 50gPreston Bullet Feeder Small 60gPreston Bullet Feeder Medium 20gPreston Bullet Feeder Medium 40gPreston Bullet Feeder Medium 50gPreston Bullet Feeder Medium 60gPreston Bullet Feeder Large 30gPreston Bullet Feeder Large 40gPreston Bullet Feeder Large 50gPreston Bullet Feeder Large 60gMedium 30gLarge 70gSmall 70gMedium 70gBenefitsAllow longer and more accurate casting compared to classic feedersDurable construction for intensive useThe open cage helps the groundbait work quickly in the waterWide choice of sizes and weights to adapt to any venue and conditionsA reliable choice for competitive and recreational feeder fishingNoteAvailability of certain variants may vary depending on stock levels. The product comes with the factory quality of the Preston Innovations brand.

Short OverviewThe Preston ICS In-Line Banjo XR Feeder is an advanced feeder designed for precise bait presentation and secure groundbait retention during the cast. It is ideal for feeder fishing for carp, skimmers, and roach, especially when distance, accuracy, and quick adaptation to water conditions are important.DescriptionThis in-line Banjo XR feeder is an excellent solution for anglers who want better feed protection than classic method models. Thanks to its forward-positioned weight, the feeder flies stably and accurately, making it highly suitable for fishing on commercial waters, as well as in situations where longer casting distances are required. As part of the Preston ICS system, it allows easy feeder changes without dismantling the entire rig.FeaturesIn-line Banjo XR design for more direct bite transmission.Forward-positioned weight for long and accurate casts.Raised sides for better bait and groundbait protection.Strong and durable frame construction.Made of lead and plastic.Compatible with ICS Banjo moulds.Suitable for feeder fishing on commercial and natural waters.TechnologyThe ICS (Interchange System) system enables quick and easy feeder changes without dismantling the rig.The weight forward design improves flight stability and increases casting range.SpecificationsProduct namePreston ICS In-Line Banjo XR FeederBrandPreston InnovationsTypeIn-line Banjo feederMaterialLead and plasticSystemICS (Interchange System)Key featuresWeight forward design, raised sides, strong construction, compatibility with ICS Banjo mouldsEAN barcode (Medium 30 g variant)5056317703757Available VariantsSizeWeightSmall20 gSmall30 gSmall45 gMedium20 gMedium30 gMedium45 gLarge30 gLarge45 gLarge60 gMedium75 gAdvantagesVery accurate and stable casting at short and long distances.Better protection for bait and feed during flight and on impact with the water.Quick feeder changes thanks to the ICS system.An excellent choice for targeted feeder fishing for carp, skimmers, and roach.Reliable Preston Innovations quality for intensive use.NoteAvailability of certain sizes and weights may vary depending on stock levels. Use with compatible Preston ICS components is recommended for the best performance on the bank.

Quick OverviewThe Drennan Distance Cage Feeder is a cage feeder developed for long-range and accurate feeder casting. Thanks to its aerodynamic weight and extra-strong wire mesh, it is an excellent choice for anglers looking for reliability, stable flight, and fast groundbait release.DescriptionThis feeder is designed for feeder fishing at greater distances, especially when casting accuracy and proper groundbait presentation are important. The construction retains its shape even after intensive use, while the double welded legs allow effective compression of the groundbait from both sides. Suitable for use on feeder rigs and helicopter rigs, in stillwaters and flowing waters.FeaturesMade from extra-strong wire meshRetains its shape even after intensive useDouble welded legs allow compression of the groundbait from both sidesThe nylon loop is firmly secured and suitable for feeder or helicopter rig setupsAerodynamic bomb weight for accurate and long casts up to approximately 70 mAvailable in Standard and Heavy versions, depending on weight and sizeTechnologyExtra-strong wire mesh construction for greater durability and resistanceAerodynamic bomb weight design for better stability in flight and greater casting distanceSpecificationsBrandDrennanProduct typeCage feeder for feeder fishingMaterialExtra-strong wire meshColorsCamo green (Standard), camo brown (Heavy)WeightAerodynamic bomb weightRigsFeeder rig, helicopter rigSpecial featuresDouble welded legs, firmly crimped nylon loopMaximum recommended distanceUp to approximately 70 mAvailable VariantsVariantWeight50g Large50 g70g Large70 g40g Med40 g60 Med60 g30g Small30 g50G Small50 gBenefitsAn excellent choice for long casts and accurate feedingRobust construction for long-lasting useFast and efficient groundbait releaseSecure and simple setup on different feeder systemsMultiple sizes and weights to suit different fishing conditionsNoteAvailability depends on the selected variant. Before ordering, please check the desired size and weight, and the warranty and purchase terms apply according to the store's policy.

Quick OverviewThe Daiwa N'ZON Method Mould is a practical mould for method feeders that enables fast, neat, and consistent shaping of groundbait and pellets. It is intended for anglers who want consistent bait presentation and easier feeder loading during feeder fishing.DescriptionThis mould was developed for precise filling of method feeders, with easy removal of the finished setup from the mould. Its flexible design and easy-release surface help shape the groundbait evenly, without crumbling and without unnecessary material loss. It is especially useful in method feeder fishing when preparation speed, repeatability, and neat bait presentation are key to success on the bank.FeaturesMould for fast and consistent filling of method feedersSuitable for shaping groundbait, pellets, and feeder mixesFlexible construction for easier useEasy-release design for easier removal of the loaded feederRubberised coating contributes to a more secure grip and durabilityDesigned for precise and neat bait presentationTechnologyEasy release moulds per size – each mould size is adapted for easier release of the loaded feederRubberised low viz splash camo finish – rubberised finish in a discreet camo colourSpecificationsBrandDaiwaModelN'ZON Method MouldMaterialLead-free zinc alloy, with rubberised coatingColourLow viz splash camoCompatibilityDaiwa method feeder feedersIntended UseMethod feeder fishingPropertiesFlexible mould, easy releaseAvailable VariantsSMLAdvantagesSpeeds up preparation and loading of the method feederEnsures a uniform groundbait shape on every castReduces spillage of groundbait and pelletsMakes it easier to remove the loaded feeder from the mouldHelps achieve more precise and repeatable bait presentationNoteSelect the mould size according to the corresponding method feeder size. Variant availability may vary depending on stock status and product batch.

Quick OverviewThe Daiwa N'ZON Method Feeder is a quality method feeder designed for feeder fishing when precision, stable flight, and fast loading are key to success. It is an ideal choice for anglers looking for a reliable feeder for pellets or groundbait on commercial waters, lakes, and slower-flowing rivers.DescriptionThis model was developed for efficient and tidy bait presentation in method fishing. The Weight-Forward construction helps with longer and more accurate casts, while the Easy-Grip camo surface makes loading and handling easier even when your hands are wet. The interchangeable central stem further simplifies rig adjustment on the bank without unnecessary loss of time.FeaturesMethod feeder for feeder fishingEasy-Grip camo surface for more secure loading and better gripWeight-Forward design for stable flight and more accurate castingInterchangeable central stem for quick rig changesSuitable for loading with pellets and groundbaitMade from lead-free materialAvailable in sizes S, M and LTechnologyWeight-Forward design for better aerodynamics and control during the castEasy-Grip camo finish for easier handlingExchange system with interchangeable central stemSpecificationsProduct typeMethod feederPurposeFeeder fishingSurfaceEasy-Grip camoDesignWeight-ForwardSystemInterchangeable central stemMaterialLead-freeSizesS, M, LAvailable VariantsVariantSize / weightS 20gS / 20 gS 30gS / 30 gM 25gM / 25 gM 35gM / 35 gM 45gM / 45 gL 35gL / 35 gL 50gL / 50 gL 65gL / 65 gBenefitsEnables long and accurate castingSimple and fast feeder loadingConvenient stem replacement without tying a new rigGood control of bait presentation around the hookbaitA more environmentally friendly choice thanks to its lead-free constructionNoteAvailability of specific variants may vary depending on stock levels. The weights refer to the empty feeder, without feed and hookbait.

Quick overviewThe Preston Innovations Plug IT Feeder is a hybrid feeder that combines the carrying capacity of a classic open-end feeder with the fast release of a cage model. It is designed for anglers who want reliable presentation of groundbait and loose feed on lakes, canals, and rivers.DescriptionThis model was developed for effective feeder fishing for silverfish in situations where it is important to deliver the bait securely to the bottom and then activate it quickly in the water. Loose feed is placed in the central section of the feeder, while the ends are sealed with groundbait, providing excellent aerodynamics during the cast and controlled release of the contents after submersion. Thanks to the flexible TPE link and integrated swivel, the Plug IT Feeder offers stability, reduces rig tangles, and makes accurate casting easier at different distances.FeaturesHybrid design combining open-end and cage operating principles.Central chamber for loose feed for more secure loading and casting.The ends can be sealed with groundbait while still allowing water to pass through.Fast release of the contents once the feeder settles on the bottom.Flexible TPE link for better rig performance.Integrated swivel helps with casting and reduces twisting.Very durable construction for frequent use.TechnologyFlexible TPE link for greater flexibility and better rig control.Integrated swivel for easier and more accurate casting.Hybrid open-end/cage concept combining carrying capacity and fast bait release.SpecificationsBrandPreston InnovationsModelPlug IT FeederTypeHybrid feederLink materialTPELinkFlexible TPE linkSwivel elementIntegrated swivelPurposeFeeder fishing for silverfishApplicationLakes, canals, and riversLoading methodLoose feed in the middle, ends sealed with groundbaitAvailable sizesSmall, Medium, LargeAvailable weights20 g, 30 g, 45 g, 60 gAvailable variantsMedium 30 gMedium 45 gSmall 20 gSmall 30 gSmall 45 gMedium 20 gMedium 60 gLarge 30 gLarge 45 gLarge 60 gAdvantagesSecurely carries loose feed during the cast.Allows quick activation and washout of the contents on the bottom.Suitable for different waters and fishing conditions.Wide choice of sizes and weights for precise adjustment.Durable construction for long-lasting performance.Flexible connection and swivel contribute to a tidier rig setup.NoteAvailability of individual variants may vary depending on stock levels. After fishing, it is recommended to rinse and dry the feeder for a longer service life.

Quick overviewPreston Innovations Hexmesh Plastic Open End Feeders are high-quality feeder cages designed for controlled and even groundbait release. They are intended for anglers looking for a reliable feeder for feeder and match fishing, especially in deeper water or stronger currents.DescriptionThanks to the solid walls and precisely engineered Hexmesh openings, these open-end feeders allow slower and more controlled washing out of the groundbait. This design is especially useful when fishing on rivers, canals, or lakes where you want to keep the feed in the feeder long enough during the cast and descent to the bottom. The lightweight yet durable plastic frame resists damage and provides long-lasting use in various fishing conditions.FeaturesOpen-end feeder cage for precise feeding.Most of the walls are closed for slower and controlled groundbait release.Precise Hexmesh openings enable even washing out of the contents.An excellent choice for deep water and faster-flowing waters.Lightweight and durable plastic construction resistant to damage.Suitable for feeder and match fishing.TechnologyHexmesh opening system for controlled groundbait release.Solid-walled construction for more stable feeder performance in more demanding conditions.SpecificationsBrandPreston InnovationsModelHexmesh Plastic Open End FeedersMaterialPlasticTypeOpen-end feeder cageConstructionPredominantly closed walls with precise Hexmesh openingsIntended useFeeder and match fishingApplicationDeep water and waters with stronger currentDesign advantageSlower and controlled groundbait releaseWeight range15 g - 50 gAvailable variantsMicro 15gMicro 20gMicro 30gSmall 20gSmall 30gSmall 40gMedium 20gMedium 30gMedium 40gLarge 20gLarge 30gLarge 40gLarge 50gXL 20gXL 30gXL 40gXL 50gAdvantagesBetter control of groundbait release compared to more open cage models.Reliable performance in deep water and stronger current.Impact resistance and long service life.A wide choice of sizes and weights to suit different fishing conditions.NoteAvailability of individual variants may vary depending on stock levels. We recommend choosing the size and weight according to casting distance, depth, and the strength of the water current.

Quick OverviewThe Preston Innovations ICS Inline Dura Flat Meth Feeder is a compact method feeder for precise groundbait feeding and neat bait presentation. It is ideal for feeder fishing on commercial waters, in colder conditions, and when you want to cast quickly, frequently, and accurately.DescriptionThis inline method feeder was developed for anglers seeking reliability, easy weight changes, and consistent groundbait release. The Dura Flat shape helps the feeder sit steadily on the bottom, while the specially spaced ribs allow for correct bait placement. Thanks to the ICS system, you can change the feeder quickly without cutting the rig, which is a major advantage in modern feeder and method fishing.FeaturesFully compatible with the Preston ICS range.Precisely positioned vented holes for even groundbait release.Special spread rib configuration for better bait placement.Anti-glare finish for a more discreet presentation.Matching method moulds available.Inline construction for secure bite transmission and neat presentation.Compact Mini format for a smaller and precise amount of groundbait.TechnologyInterchange System (ICS) – quick feeder changes without retying the rig.Dura Flat design – more stable position on the bottom and effective method presentation.SpecificationsModelICS Inline Dura Flat Meth FeederBrandPreston InnovationsTypeInline method feederCompatibilityPreston ICS (Interchange System)DesignDura FlatGroundbait releasePrecisely positioned vented holesRib configurationSpread ribs for better bait placementFinishAnti-glareAccessoriesMatching method moulds available separatelyIntended useFeeder and method fishing on commercial waters and in colder conditionsAvailable VariantsMini 15 gMini 20 gMini 30 gAdvantagesVery precise presentation of a smaller amount of groundbait.Quick weight and feeder changes thanks to the ICS system.Discreet appearance on the bottom due to the anti-glare finish.Stable feeder position and effective groundbait release.An excellent choice for intensive fishing with frequent casting.NoteMethod mould sold separately. Availability of individual variants depends on stock levels and the current offer.

Quick overviewThe Guru Window Feeder (Caged) is a cage feeder developed for fast bait release, accurate casting, and efficient feeding at longer distances. It is an excellent choice for feeder anglers who want quick weight changes, stable flight, and reliable presentation of groundbait mixes, small pellets, and particles.DescriptionThis Guru feeder upgrades the classic window concept with a cage construction that allows faster washing out of the contents and better performance when you want more active feeding. The aerodynamic shape and forward-weighted weight distribution help with longer and more accurate casts, while the fast-sinking design contributes to effective fishing on both running and still waters. It is especially suitable for feeder fishing with groundbait, smaller pellets, and particles when it is important to maintain a steady feeding rhythm.FeaturesCage design for fast bait release.Aerodynamic shape for stable and accurate casting.Forward-weighted design for better distance and flight control.Sinks very quickly and reaches the fishing zone fast.Practical for feeding with groundbait, small pellets, and particles.Quick weight changes without the need to replace the entire feeder.Compatible with existing Guru Window Feeder weights.TechnologyX-Change weight system – a system for easy and quick weight changes according to water conditions.SpecificationsBrandGuruModelWindow Feeder (Caged)TypeCage feederPurposeFeeder fishing, long-distance casting, fast bait releaseConstructionCage design with window-style loading conceptDesignAerodynamic shape and forward-weighted weight distributionWeight systemX-Change, quick-change weightsCompatibilityCompatible with existing Guru Window Feeder weightsIdeal forGroundbait, small pellets, and particlesWeight range20–60 g, depending on the variantAvailable variantsX-Small 20g + 30gInterchangeable weight set 20 g + 30 gX-Small 40g + 50gInterchangeable weight set 40 g + 50 gSmall 20g + 30gInterchangeable weight set 20 g + 30 gSmall 40g + 50gInterchangeable weight set 40 g + 50 gMedium 30g + 40gInterchangeable weight set 30 g + 40 gMedium 50g + 60gInterchangeable weight set 50 g + 60 gLarge 30g + 40gInterchangeable weight set 30 g + 40 gLarge 50g + 60gInterchangeable weight set 50 g + 60 gBait Up 40g + 50gInterchangeable weight set 40 g + 50 gAdvantagesFaster content release for a more active feeding pace.One feeder, multiple weight options thanks to the X-Change system.Excellent control on long and accurate casts.Suitable for different amounts of groundbait and various water conditions.Compatibility with existing Guru Window Feeder weights reduces the need for additional equipment.NoteThe weights listed with the variants refer to the interchangeable weight set included in the package. Availability of individual variants may vary, so choose the product according to casting distance and the amount of bait you want to introduce.

Short OverviewThe Cralusso Rocket Method Basket is a method feeder basket designed for feeder anglers looking for stable flight, long casts, and secure bait retention. Thanks to its longitudinal ribs and forward-shifted center of gravity, it is an excellent choice for precise bait presentation in both competition and recreational fishing.DescriptionThis inline method basket was developed for initial feeding and introducing larger amounts of groundbait, while maintaining a neat and effective presentation. The construction with a longer stem and a center of gravity shifted forward enables a smoother flight through the air and greater casting distance, while the longitudinal ribs help keep the bait in place and reduce the chance of hook snagging. It is suitable for method feeder fishing for carp, grass carp, and other white fish, especially when quick weight changes are needed without dismantling the rig.FeaturesMethod basket for feeder fishing and precise castingLongitudinal ribs for better bait retentionReduced chance of tangling and hook snaggingForward-shifted center of gravity for longer and more stable castsLonger stem for better flight controlQuick change on a 4 mm stem without dismantling the rigUp to 30% greater capacity compared to the previous modelSuitable for competition rulesDesigned for initial feeding and larger amounts of groundbaitPackaging: 1 pcTechnologyCompatible with the Cralusso SHELL tool for quick and easy filling3D-developed construction for an optimized aerodynamic shape and bait retentionSpecificationsBrandCralussoModelRocket Method BasketTypeInline method basketDimensions63 x 36 mmColorWhiteMaterialZinc in lighter weightsStem4 mmPurposeMethod feeder fishing, initial feeding, and larger amounts of groundbaitCapacityUp to 30% greater than the previous modelCompatibilityCralusso SHELL toolPackaging1 pcAvailable Variants25 g30 g40 g50 g70 g60 g 1 pcAdvantagesAllows long and precise casts in feeder fishingRetains bait better on the basket during the cast and descent to the bottomQuick weight changes save time while fishingSuitable for competitions and intensive fishingThe greater capacity is useful when you want to introduce more groundbait into the fishing zoneNoteThe product is supplied as 1 piece per pack, depending on the selected variant. The SHELL filling tool is sold separately, and the availability of individual weights may vary.