This is a smaller version of the famous Stow bobbins, which were developed on the banks of Elstow Lake and have been used by many members of Team Korda for years. The principle behind this bobbin is that it can be fished with both tight and slack lines, and when you get a take, the line releases from the clip on the side of it.For that to happen the stainless steel ball chain which it is fitted to needs to be the same length as your bite alarm, and a detachable connector system allows you to easily adjust it so that it is compatible with any buzzer (it comes set at the correct length for use with something like a Delkim, or similar sized alarm).It comes fitted with a stainless steel weight, but the 6g and 8g Overweights, which are sold separately as part of the Stow range, can also be used with it. The Basix Mini Stow can be fitted with a Mini Isotope (available in seven different colours), and is fitted below your bite alarm using a moulded hockey stick, which the ball chain screws into. It is available in a choice of red, green or blue.

New black finish Adjustable line clip system Compact stainless steel arm for greater sensitivity at short and medium range 42g sliding collar weight Light reactive acrylic indicator head Betalight slot

Limited Edition “Fox Camo” version of the Mini Micron X bite alarm A modern re-worked version of the old school classic Mini Micron Bite Alarm boasting a number of great new features including receiver technology Volume control button with seven levels Tone control button with four settings Sensitivity control button with four different settings Drop back differential  Compatible with Mini Micron X Receiver  Two Ø5mm High Vis Multi coloured LED’s, Green, Blue, Red and Orange  Colour selected by holding down volume button and pressing sensitivity button to change Adjustable LED brightness LED’s adjusted by holding down volume button and pressing tone button D-Tec Sensing System/Roller wheel technology for clear, consistent bite detection Power out socket 2.5mm – for use with illuminated bite indicators such as the Fox Illuminated Swinger® Low battery warning Batteries are too low when the LEDs automatically begin to flash red every 2 seconds Cone speaker for crisp sound Rubber inlays to protect your rod and hold it in place on savage bites On/off toggle switch Knurled locking collar Takes small N Type/ LR1 batteries Metal (Alloy) 3/8 BSF thread Top tip: For the best bite indication always use in conjunction with a Bobbin, Hanger or Swinger®

Limited Edition “Fox Camo” version of the Mini Micron X bite alarm A modern re-worked version of the old school classic Mini Micron Bite Alarm boasting a number of great new features including receiver technology Volume control button with seven levels Tone control button with four settings Sensitivity control button with four different settings Drop back differential  Compatible with Mini Micron X Receiver  Two Ø5mm High Vis Multi coloured LED’s, Green, Blue, Red and Orange  Colour selected by holding down volume button and pressing sensitivity button to change Adjustable LED brightness LED’s adjusted by holding down volume button and pressing tone button D-Tec Sensing System/Roller wheel technology for clear, consistent bite detection Power out socket 2.5mm – for use with illuminated bite indicators such as the Fox Illuminated Swinger® Low battery warning Batteries are too low when the LEDs automatically begin to flash red every 2 seconds Cone speaker for crisp sound Rubber inlays to protect your rod and hold it in place on savage bites On/off toggle switch Knurled locking collar Takes small N Type/ LR1 batteries Metal (Alloy) 3/8 BSF thread Top tip: For the best bite indication always use in conjunction with a Bobbin, Hanger or Swinger®

New black finish Illuminates when connected to alarms with power out facility Head display mimics Micron LED to signal drop backs Streamlined Micron attachment tabs Rubber shock absorbers on bottom of head Widened front end for increased visibility Spring loaded adjustable tensioning system Fixed line gate system 80g sliding collar weight Light reactive acrylic indicator head Betalight slot

Built-in Swinger attachment on snag ear plate for easy alarm and Swinger alignment Designed for Fox Swingers to be screwed onto Ears can be unscrewed to protect them in transit or when they are not needed Rubber over moulds on the top half are designed to offer protection to your rod Designed to work with most bite alarms, especially our N and M series of Microns! Available in two sizes – standard and XL for fishing with rod tips high Packaging made from 100% recycled cardboard

This Bobbin Kit contains everything you need for effective bite indication, whether you are fishing in the margins or at long range.The kit contains two line clips. One is a traditional ball clip that allows movement through the clip, while the other is a Ying-Yang design that can either be used free running or pinched to the line for unrivalled sensitivity.There's a small bobbin head which is ideal for short to medium range, as well as a larger head that's suitable for long range fishing. Two memory-free Dacron cords are also included, as well as a 5g add on weight. Kit contains the following: 1 x Small bobbin head  1 x Large bobbin head 1 x Traditional ball clip 1 x Ying Yang clip 1 x 6 inch Dacron cord 1 x 9 inch Dacron cord 1 x 5g add on weight 1 x bobbin storage box Available in white, blue, green, purple, orange, redThe add-on weights are designed to add additional weight to Avid Bobbins when circumstances demand it.

Prologic indikatori ugriza Kvalitetna bijela PFTE glava Zmijoliki lanac Odlična indikacija ugriza Podesiva osjetljivost

Prologic indikator Moderno dizajniran Zadovoljava sve potrebe šaranskog ribolova Izuzetno podesiva osjetiljivost Tijelo od ugljika i plastike Dostupan u više boja

The STB BITE INDICATOR has all the features needed to meet any fishing situation (strong currents or winds, boat fishing, heavy rain…) 100 % waterproof, lightweight and sleek design adapts to every situation. Powered by 9V batteries for extra-long life. Tone, light volume and sound can be adjusted by 4 simple push buttons on the front. A great choice for all anglers from beginners to top level competitors. - Digital technology- 100% waterproof- 7 different tones including silent- 6 sensitivity settings- 6 different tones- High-viz diodes- The central LED can be left lit at night- 2 diodes on the lugs- one for bite indication one a delay light- Bite indication by contact on a magnetised wheel- Powered by 9v battery- Easy access battery compartment- Jack plug for light accessories- Simple push button adjustment- 4 buttons (Sensitivity, Light, Volume and Tone)- Intuitive easy adjustment

Dvostruko zvono za štap Sa krokodil kopčom

PRODUCT OVERVIEW Machined aluminium body Memory-free 6in super soft black Dacron cord with machined black aluminium hockey stick connection Cord can be shortened should you wish Narrow mid-section with isotope viewing slots allows glow from isotope to be seen from all angles Ideal for slack line fishing at short range and semi-slack line fishing at medium range Features unique Black Label Slik Bobbin Clip, which can fix to line for greater sensitivity but can also be left free running should you wish Available in following clip colours: Red, Orange, Green, Blue, Purple, White and Black Line tension can be adjusted by tightening or loosening clip on the body Colours can be changed at any time by purchasing individual Slik Bobbin Clips and removing the black collar they are supplied with Weighs 5g

ESP Black Stainless Bobbin Kit - White Due to popular demand, black and white pure PTFE bobbins with black stainless fittings – all made in the ESP UK factory, ensuring exceptional quality and precision. For the fittings we have used high grade stainless steel with a special durable black coating.Each kit contains- PTFE Barrel Bobbin- Interchangeable ball clips- Interchangeable grip clips- 3" and 7" stainless steel reversible black stainless ball chains- 3g black stainless add-on weight- Black stainless steel hockey stickThe two stainless ball chains have a unique feature where we have used a machined acetyl connector at one end and a 3g black stainless connector at the other. This allows the chain to be simply reversed to add weight to the bobbin when required. Also adding the 3g stainless add-on weight integrated into the hockey stick increases the weight further and means that the PTFE bobbin can be used at weights of 5g, 8g or 11g.This makes for a highly versatile set up suitable for everything from slack line fishing where a light bobbin is required to tight line fishing at range with the weight of the bobbin increased to the maximum.The interchangeable line clips simply allow the bobbin to be fished running on the line with the ball clips or gripping the line 'Elstow style' with the grip clips. The 3" ball chain is best suited to this setup, with the bobbin fished on a short drop near the bite alarm.Features- Black and white barrel bobbins- Black hardware- Interchangeable ball clips- Interchangeable grip clips- Reversible chain and additional weights

PRODUCT OVERVIEW Glass filled nylon swinger tag adapter fitted with adjustable hockey stick Converts any current Swinger tag product including Snag Ears & Swinger Plate to an Adjustable Hockey Stick thus enabling any Black Label indicator to be used Simply screw the chosen indicator to lock the hockey stick into the preferred position Prevents the removal of alarms to swap from Swingers to Black Label Indicators

Description  High visibility 4mm multi-coloured LED Red, Orange, Green, Blue, Purple and White LED colour changed by pushing rubber touch button On rear of alarm (as per RX+) Dual step sensitivity Indexed volume adjustment dial Indexed tone adjustment dial Top quality cone speaker Built in I-Com transmitter technology For use with MX Receiver Rubber ear inlays Tru-run roller wheel Three position toggle switch D-Tech Sensing System Silent start up 1 x power out socket For use with illuminated bite indicators Supplied with hard case Powered by 2 x AAA batteries

Description  Weatherproof sealed case Digital circuitry D-Tec™ Plus Sensing System (DTSS) Low battery drain CNC machined Tru-Run™ roller wheel Twin multi-colour LEDs (Red, Green, Blue, Orange, Purple & White) On / Off toggle switch with 2 operational modes (day and night mode) When in night mode both LEDs will subtly glow in your chosen colour High quality cone speaker Rigid 3/8” stainless steel thread Rod-friendly rubber inlays Indexed ergonomic control for volume (8 different levels of volume with lowest setting being completely silent) Indexed ergonomic control for tone (8 different tone settings: turn dial clockwise to raise pitch and anti-clockwise to lower pitch) Indexed ergonomic control for Intelligent Sensitivity featuring See-Saw elimination (8 different sensitivity settings – see below Sensitivity table for comparison to NTX-R) Range test function allows user to check RX+ Receiver is picking up RX+ head at any given range Low battery warning (LED colour changes to cyan indicating it is time to replace batteries) Power Out Socket (2.5mm) for use with illuminated Swingers Supplied with two compression washer options: rigid and soft with an additional spare soft washer per unit Requires 2 x AA batteries RX+ Single heads, RX+ Receiver, 2-rod and 3-rod presentation sets also available separately  Improved features compared to NTX-R Deeper ears with no increase in the height of the alarm Twin multi-colour LEDs, one per ear and at the very top of the ear External control of the multi-colour LEDs with Colour Sync™ function – simply change LED colour via button on the battery cover Manually selectable day and night modes External control of the Vari-Bright adjustable LED brightness to suit the conditions you are fishing in (choice of 3 LED brightness settings in day mode and 3 different brightness settings in night mode) simply adjust via button on battery cover Larger clearance around the roller wheel and improved drainage vastly reduces chances of roller wheel freezing up in extreme cold conditions Stronger range performance with RX+ Receiver Improved sensitivity range (see below) Sensitivity Control In all sensitivity settings (except maximum), the line must travel the specified distance in the same direction and within 2 seconds in order to trigger the unit. Any movement in the opposite direction will reset the distance counter to zero. This can substantially reduce, or eliminate false triggering caused by wind and water movement.                                                                             Line Movement RX+                       Line Movement NTX-R Setting 1 (Min)                     90mm                                                   74mm Setting 2                              73mm                                                   56mm Setting 3                              56mm                                                   48mm Setting 4                              34mm                                                   40mm Setting 5                              17mm                                                   32mm Setting 6                              11mm                                                   24mm Setting 7                              5.6mm                                                  16mm Setting 8 (Max)                     2.8mm                                                  8mm RX+ Receiver Features Ultra-Long Range™ Digital circuitry Low battery drain Battery life indication when receiver is switched on (4 x green LEDs indicates full/close to full, 3 x green LEDs indicates the batteries are used, but do not need replacing, 2 x orange LEDs indicates the batteries are becoming low, 1 x red LED indicates batteries are low and need replacing) Low battery warning (LEDs will flash cyan periodically indicating the batteries need replacing) Alarm low battery warning (when RX+ head turns to low battery warning so will the receiver for that particular alarm, again changing colour to cyan) Vibration alert function (via switch on rear) Bivvy light function (via switch on rear, see below for more details) Anti-theft alarm Easy RX+ Micron registration (via switch at rear) Indicator LEDs with Colour Sync™ On/Off & volume control High quality cone speaker Lanyard attachment point Requires 3 x AA batteries Improved features over NTX-R Receiver Larger indicator LED windows, visible from both the front and the top of the receiver Optional bivvy light function when you receive a bite Free standing design for placing on bivvy table/bucket lid Soft grip casing Ability to sync up to eight RX+ Micron heads Stronger radio performance Silent ON mode, full receiver function but with no sound output Bivvy Light function When the bivvy light feature is turned on via the switch on the back of the receiver it will behave in the following ways: The indication lights on the receiver will be dimmed slightly to prevent the receiver emitting too much light whilst the bivvy light is active The bivvy light will only come on if three bite triggers are received in quick succession to prevent liners and false indication turning your bivvy light on unnecessarily The bivvy light will fade into full brightness and remain on whilst the alarm continues to send trigger signals to the receiver. The light will fade out to nothing in the 5 seconds after the trigger lights have gone out on the receiver as long as no more indications are received